[coreboot-gerrit] Patch set updated for coreboot: 5c32e7e superio: Uncomment the w83627uhg UART clock source initialization

[Dave Frodin (dave.frodin@se-eng.com)]

Dave Frodin (dave.frodin at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4573

-gerrit

commit 5c32e7e548af9443fbfce33ae8623ea252dfd291
Author: Dave Frodin <dave.frodin at se-eng.com>
Date:   Thu Dec 26 08:17:16 2013 -0700

    superio: Uncomment the w83627uhg UART clock source initialization
    
    The asrock/imb-a180 mainboard is the first mainboard to use this
    w83627uhg/nct6627UD sio. The default h/w clock setting is 0. Adding
    the SIO in the mainboard Kconfig made the builder complain that the
    set_uart_clock_source() wasn't being used. So the calls to that function
    were uncommented.
    
    Change-Id: Iedba035237c5c0fa230b02ff4799bb8c1b7bbd4a
    Signed-off-by: Dave Frodin <dave.frodin at se-eng.com>
---
 src/superio/winbond/w83627uhg/superio.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/src/superio/winbond/w83627uhg/superio.c b/src/superio/winbond/w83627uhg/superio.c
index 3f1ca38..9de7ac0 100644
--- a/src/superio/winbond/w83627uhg/superio.c
+++ b/src/superio/winbond/w83627uhg/superio.c
@@ -68,22 +68,22 @@ static void w83627uhg_init(device_t dev)
 
 	switch(dev->path.pnp.device) {
 	case W83627UHG_SP1:
-		/* set_uart_clock_source(dev, 0); */
+		set_uart_clock_source(dev, 0);
 		break;
 	case W83627UHG_SP2:
-		/* set_uart_clock_source(dev, 0); */
+		set_uart_clock_source(dev, 0);
 		break;
 	case W83627UHG_SP3:
-		/* set_uart_clock_source(dev, 0); */
+		set_uart_clock_source(dev, 0);
 		break;
 	case W83627UHG_SP4:
-		/* set_uart_clock_source(dev, 0); */
+		set_uart_clock_source(dev, 0);
 		break;
 	case W83627UHG_SP5:
-		/* set_uart_clock_source(dev, 0); */
+		set_uart_clock_source(dev, 0);
 		break;
 	case W83627UHG_SP6:
-		/* set_uart_clock_source(dev, 0); */
+		set_uart_clock_source(dev, 0);
 		break;
 	case W83627UHG_KBC:
 		pc_keyboard_init(&conf->keyboard);