r93 - in trunk/SerialICE: . mainboard

Author: stepan
Date: 2010-01-17 00:47:13 +0100 (Sun, 17 Jan 2010)
New Revision: 93

Added:
   trunk/SerialICE/mainboard/roda_rk886ex.c
Modified:
   trunk/SerialICE/Kconfig
Log:
Add Roda RK886EX support

Signed-off-by: Stefan Reinauer

Modified: trunk/SerialICE/Kconfig
===================================================================
--- trunk/SerialICE/Kconfig	2010-01-02 23:35:27 UTC (rev 92)
+++ trunk/SerialICE/Kconfig	2010-01-16 23:47:13 UTC (rev 93)
@@ -30,6 +30,9 @@
 config BOARD_KONTRON_986LCD_M
    bool "Kontron 986LCD-M/mITX"

+config BOARD_RODA_RK886EX
+	bool "Roda RK886EX"
+
 config BOARD_INTEL_D945GCLF
    bool "Intel D945GCLF"

@@ -62,6 +65,7 @@
 config BOARD_INIT
    string
    default "kontron_986lcd-m.c" if BOARD_KONTRON_986LCD_M
+	default "roda_rk886ex.c" if BOARD_RODA_RK886EX
    default "intel_d945gclf.c" if BOARD_INTEL_D945GCLF
    default "dell_s1850.c" if BOARD_DELL_S1850
    default "asus_m2v-mx_se.c" if BOARD_ASUS_M2V_MX_SE

Added: trunk/SerialICE/mainboard/roda_rk886ex.c
===================================================================
--- trunk/SerialICE/mainboard/roda_rk886ex.c	                        (rev 0)
+++ trunk/SerialICE/mainboard/roda_rk886ex.c	2010-01-16 23:47:13 UTC (rev 93)
@@ -0,0 +1,105 @@
+/*
+ * SerialICE 
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * This is an example chipset init file for the Roda RK886EX (Rocky 3+)
+ */
+
+/* Hardware specific functions */
+
+#define RCBA	0xfed1c000
+#define   GCS	0x3410
+#define RCBA32(x) *((volatile u32 *)(RCBA + x))
+
+static void southbridge_init(void)
+{
+	u16 reg16;
+	u32 reg32;
+
+	// Set up RCBA
+	pci_write_config32(PCI_ADDR(0, 0x1f, 0, 0xf0), RCBA | 1);
+
+#if 0
+	// port80 writes go to LPC:
+	reg32 = RCBA32(GCS);
+	reg32 = reg32 & ~0x04;
+	RCBA32(GCS) = reg32;
+	outb(0x23, 0x80);
+#endif
+
+	// Set up SuperIO LPC forwards
+	pci_write_config8(PCI_ADDR(0, 0x1f, 0, 0x64), 0xd0);
+	pci_write_config16(PCI_ADDR(0, 0x1f, 0, 0x80), 0x0007);
+	pci_write_config16(PCI_ADDR(0, 0x1f, 0, 0x82), 0x3f0f);
+	pci_write_config16(PCI_ADDR(0, 0x1f, 0, 0x84), 0x02e1);
+	pci_write_config16(PCI_ADDR(0, 0x1f, 0, 0x86), 0x001c);
+	pci_write_config32(PCI_ADDR(0, 0x1f, 0, 0x88), 0x00fc0601);
+	pci_write_config32(PCI_ADDR(0, 0x1f, 0, 0x8c), 0x00040069);
+
+	// Disable watchdog
+#define PMBASE 0x500
+#define TCOBASE (PMBASE + 0x60)
+	pci_write_config32(PCI_ADDR(0, 0x1f, 0, 0x40), PMBASE | 1);
+	pci_write_config8(PCI_ADDR(0, 0x1f, 0, 0x44), 0x80);
+	reg16 = inw(TCOBASE + 0x08);
+	reg16 |= (1 << 11);
+	outw(reg16, TCOBASE + 0x08);
+	outw(0x0008, TCOBASE + 0x04);
+	outw(0x0002, TCOBASE + 0x06);
+}
+
+static void superio_init(void)
+{
+	pnp_enter_ext_func_mode_alt(0x2e);
+
+        pnp_write_register(0x2e, 0x01, 0x94); // Extended Parport modes
+        pnp_write_register(0x2e, 0x02, 0x88); // UART power on
+        pnp_write_register(0x2e, 0x03, 0x72); // Floppy
+        pnp_write_register(0x2e, 0x04, 0x01); // EPP + SPP
+        pnp_write_register(0x2e, 0x14, 0x03); // Floppy
+        pnp_write_register(0x2e, 0x20, (0x3f0 >> 2)); // Floppy
+        pnp_write_register(0x2e, 0x23, (0x378 >> 2)); // PP base
+        pnp_write_register(0x2e, 0x24, (0x3f8 >> 2)); // UART1 base
+        pnp_write_register(0x2e, 0x25, (0x2f8 >> 2)); // UART2 base
+        pnp_write_register(0x2e, 0x26, (2 << 4) | 0); // FDC + PP DMA
+        pnp_write_register(0x2e, 0x27, (6 << 4) | 7); // FDC + PP DMA
+        pnp_write_register(0x2e, 0x28, (4 << 4) | 3); // UART1,2 IRQ
+
+        /* These are the SMI status registers in the SIO: */
+        pnp_write_register(0x2e, 0x30, (0x600 >> 4)); // Runtime Register Block Base
+
+        pnp_write_register(0x2e, 0x31, 0x00); // GPIO1 DIR
+        pnp_write_register(0x2e, 0x32, 0x00); // GPIO1 POL
+        pnp_write_register(0x2e, 0x33, 0x40); // GPIO2 DIR
+        pnp_write_register(0x2e, 0x34, 0x00); // GPIO2 POL
+        pnp_write_register(0x2e, 0x35, 0xff); // GPIO3 DIR
+        pnp_write_register(0x2e, 0x36, 0x00); // GPIO3 POL
+        pnp_write_register(0x2e, 0x37, 0xe0); // GPIO4 DIR
+        pnp_write_register(0x2e, 0x38, 0x00); // GPIO4 POL
+        pnp_write_register(0x2e, 0x39, 0x80); // GPIO4 POL
+
+	pnp_exit_ext_func_mode(0x2e);
+}
+
+static void chipset_init(void)
+{
+	southbridge_init();
+	superio_init();
+}
+