Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.34-ARCH (thomas@evey) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 10 21:38:22 CEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f740000 (usable) BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data) BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS) BIOS-e820: 00000000ffbc0000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x1f740 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 01F800000 mask FFF800000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e6000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000001f740000 (usable) modified: 000000001f740000 - 000000001f750000 (ACPI data) modified: 000000001f750000 - 000000001f800000 (ACPI NVS) modified: 00000000ffbc0000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001f740000 0000000000 - 0000400000 page 4k 0000400000 - 001f400000 page 2M 001f400000 - 001f740000 page 4k kernel direct mapping tables up to 1f740000 @ 15000-1a000 RAMDISK: 177f2000 - 179b0000 ACPI: RSDP 000fa720 00014 (v00 ACPIAM) ACPI: RSDT 1f740000 00030 (v01 A M I OEMRSDT 07000817 MSFT 00000097) ACPI: FACP 1f740200 00081 (v02 A M I OEMFACP 07000817 MSFT 00000097) ACPI: DSDT 1f740360 03854 (v01 I65GV I65GV223 00000223 INTL 02002026) ACPI: FACS 1f750000 00040 ACPI: APIC 1f740300 0005C (v01 A M I OEMAPIC 07000817 MSFT 00000097) ACPI: OEMB 1f750040 0003F (v01 A M I OEMBIOS 07000817 MSFT 00000097) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 503MB LOWMEM available. mapped low ram: 0 - 1f740000 low ram: 0 - 1f740000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0001f740 HighMem empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001f740 On node 0 totalpages: 128719 free_area_init_node: node 0, pgdat c1402fc0, node_mem_map c1562200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 975 pages used for memmap Normal zone: 123761 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 Allocating PCI resources starting at 1f800000 (gap: 1f800000:e03c0000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 early_res array is doubled to 64 at [16000 - 167ff] PERCPU: Embedded 14 pages/cpu @c1c00000 s34388 r0 d22956 u2097152 pcpu-alloc: s34388 r0 d22956 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127712 Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sda3 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 2576320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Subtract (39 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0001000000 - 0001559d84] TEXT DATA BSS #3 [00177f2000 - 00179b0000] RAMDISK #4 [000009fc00 - 0000100000] BIOS reserved #5 [000155a000 - 000156008d] BRK #6 [0000010000 - 0000011000] TRAMPOLINE #7 [0000011000 - 0000015000] ACPI WAKEUP #8 [0000015000 - 0000016000] PGTABLE #9 [0001561000 - 0001562000] BOOTMEM #10 [0001562000 - 0001952000] BOOTMEM #11 [0001559dc0 - 0001559dc4] BOOTMEM #12 [0001559e00 - 0001559ec0] BOOTMEM #13 [0001559ec0 - 0001559ef0] BOOTMEM #14 [0001952000 - 0001953800] BOOTMEM #15 [0001559f00 - 0001559f27] BOOTMEM #16 [00015600c0 - 00015601a0] BOOTMEM #17 [0001559f40 - 0001559f80] BOOTMEM #18 [0001559f80 - 0001559fc0] BOOTMEM #19 [0001559fc0 - 000155a000] BOOTMEM #20 [00015601c0 - 0001560200] BOOTMEM #21 [0001560200 - 0001560240] BOOTMEM #22 [0001560240 - 0001560280] BOOTMEM #23 [0001560280 - 00015602c0] BOOTMEM #24 [00015602c0 - 00015602d0] BOOTMEM #25 [0001560300 - 0001560325] BOOTMEM #26 [0001560340 - 0001560365] BOOTMEM #27 [0001c00000 - 0001c0e000] BOOTMEM #28 [0001e00000 - 0001e0e000] BOOTMEM #29 [0001560380 - 0001560384] BOOTMEM #30 [00015603c0 - 00015603c4] BOOTMEM #31 [0001560400 - 0001560408] BOOTMEM #32 [0001560440 - 0001560448] BOOTMEM #33 [0001560480 - 0001560528] BOOTMEM #34 [0001560540 - 00015605a8] BOOTMEM #35 [0001953800 - 0001955800] BOOTMEM #36 [0001955800 - 0001995800] BOOTMEM #37 [0001995800 - 00019b5800] BOOTMEM #38 [0001e0e000 - 0002082fc0] BOOTMEM Initializing HighMem for node 0 (00000000:00000000) Memory: 500496k/515328k available (2930k kernel code, 14380k reserved, 1208k data, 404k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdff40000 - 0xff7fe000 ( 504 MB) lowmem : 0xc0000000 - 0xdf740000 ( 503 MB) .init : 0xc140b000 - 0xc1470000 ( 404 kB) .data : 0xc12dca4c - 0xc140adc0 (1208 kB) .text : 0xc1000000 - 0xc12dca4c (2930 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2999.802 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.58 BogoMIPS (lpj=9999340) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks Disabling lock debugging due to kernel taint CPU0: Thermal monitoring enabled (TM1) Performance Events: no PMU driver, software events only. Checking 'hlt' instruction... OK. ACPI: Core revision 20100121 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (12003.51 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - B7, should be B2 (20100121/tbutils-314) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x1f800000-0xffefffff] pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10: [mem 0xfe800000-0xfebfffff pref] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:00:02.0: reg 14: [mem 0xfe780000-0xfe7fffff] pci 0000:00:02.0: reg 18: [io 0xec00-0xec07] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20: [io 0xdc00-0xdc1f] pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f] pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f] pci 0000:00:1d.3: reg 20: [io 0xe800-0xe81f] pci 0000:00:1d.7: reg 10: [mem 0xfe77bc00-0xfe77bfff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff] pci 0000:00:1f.5: reg 14: [io 0xd400-0xd43f] pci 0000:00:1f.5: reg 18: [mem 0xfe77b800-0xfe77b9ff] pci 0000:00:1f.5: reg 1c: [mem 0xfe77b400-0xfe77b4ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:01:05.0: reg 10: [io 0xb800-0xb8ff] pci 0000:01:05.0: reg 14: [mem 0xfe5ffc00-0xfe5ffcff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold pci 0000:01:05.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x1f800000-0xffefffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Expanded resource reserved due to conflict with PCI Bus 0000:00 reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000001f740000 - 000000001fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:06: [io 0x04d0-0x04d1] has been reserved system 00:06: [io 0x0800-0x087f] has been reserved system 00:06: [io 0x0480-0x04bf] has been reserved system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved system 00:09: [io 0x0680-0x06ff] has been reserved system 00:09: [io 0x0295-0x0296] has been reserved system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0a: [mem 0x000c0000-0x000dffff] could not be reserved system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0a: [mem 0x00100000-0x1f7fffff] could not be reserved system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved pci 0000:00:1f.1: BAR 5: assigned [mem 0x1f800000-0x1f8003ff] CPU1: Temperature above threshold, cpu clock throttled (total events = 1) CPU0: Temperature above threshold, cpu clock throttled (total events = 1) pci 0000:00:1f.1: BAR 5: set to [mem 0x1f800000-0x1f8003ff] (PCI address [0x1f800000-0x1f8003ff] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff] CPU1: Temperature/speed normal CPU0: Temperature/speed normal pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x1f800000-0xffefffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x1f800000-0xffefffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 0 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1784k freed apm: BIOS not found. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1282873106.319:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 981 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 404k freed udev: starting version 161 SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:1f.1: setting latency timer to 64 pata_acpi 0000:00:1f.1: PCI INT A disabled ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata1.00: ATA-5: WDC WD600BB-00CAA1, 17.07W17, max UDMA/100 ata1.00: 117231408 sectors, multi 16: LBA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD600BB-00CA 17.0 PQ: 0 ANSI: 5 ata2.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 ata2.00: 80293248 sectors, multi 16: LBA ata2.01: ATA-6: ST380011A, 8.01, max UDMA/100 ata2.01: 156301488 sectors, multi 16: LBA48 ata2.00: limited to UDMA/33 due to 40-wire cable ata2.01: limited to UDMA/33 due to 40-wire cable ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 scsi 1:0:1:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) sda: sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:1:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sdb1: sdc: sda1 sda2 sda3 sda4 sdc1 sdc2 sdc3 sdc4 < sd 0:0:0:0: [sda] Attached SCSI disk sdc5 sdc6 sdc7 sdc8 sd 1:0:0:0: [sdb] Attached SCSI disk sdc9 sdc10 > sd 1:0:1:0: [sdc] Attached SCSI disk EXT4-fs (sda3): INFO: recovery required on readonly filesystem EXT4-fs (sda3): write access will be enabled during recovery EXT4-fs (sda3): recovery complete EXT4-fs (sda3): mounted filesystem with ordered data mode udev: starting version 161 input: PC Speaker as /devices/platform/pcspkr/input/input0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:1:0: Attached scsi generic sg2 type 0 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb intel_rng: FWH not detected Linux agpgart interface v0.103 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too lp: driver loaded but no devices found parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: detected 8060K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 8139too 0000:01:05.0: eth0: RealTek RTL8139 at 0xdff78c00, 00:19:66:99:46:bc, IRQ 22 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 lp0: using parport0 (interrupt-driven). ehci_hcd 0000:00:1d.7: debug port 1 rtc_cmos 00:02: RTC can wake from S4 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected [drm] Initialized drm 1.1.0 20060810 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00 ppdev: user-space parallel port driver hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 usb 1-6: new high speed USB device using ehci_hcd and address 3 intel8x0_measure_ac97_clock: measured 52628 usecs (2536 samples) intel8x0: clocking to 48000 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] set up 7M of stolen space [drm] initialized overlay support usb 2-2: new low speed USB device using uhci_hcd and address 2 cfg80211: Calling CRDA to update world regulatory domain Console: switching to colour frame buffer device 180x56 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 usbcore: registered new interface driver hiddev input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3 generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-2/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4 generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-2/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver phy0: Selected rate control algorithm 'minstrel' Registered led device: rt73usb-phy0::radio Registered led device: rt73usb-phy0::assoc Registered led device: rt73usb-phy0::quality usbcore: registered new interface driver rt73usb EXT4-fs (sda4): mounted filesystem with ordered data mode Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k rt73usb 1-6:1.0: firmware: requesting rt73.bin NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating from 00:18:f8:74:bd:2a by local choice (reason=3) wlan0: authenticate with 00:18:f8:74:bd:2a (try 1) wlan0: authenticate with 00:18:f8:74:bd:2a (try 2) wlan0: authenticated wlan0: associate with 00:18:f8:74:bd:2a (try 1) wlan0: RX AssocResp from 00:18:f8:74:bd:2a (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: DE padlock: VIA PadLock not detected. wlan0: no IPv6 routers present