[SerialICE] New patch to review for serialice: 9c4c45a Do not add RAM filters on default_setup()

[Kyösti Mälkki]

Kyösti Mälkki ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2580

-gerrit

commit 9c4c45a618bae64b8982098051dcc6b3bce69dac
Author: Kyösti Mälkki 
Date:   Mon Mar 4 10:17:37 2013 +0200

Do not add RAM filters on default_setup()

To forward JEDEC init cycles to dram memory banks, using the
    memory fallback -filter, we must not enable RAM filters
    already at start-up.

A mainboard-specific hook shall call enable_ram() only after
    raminit and possible quick memtest have completed.

Change-Id: I9b3c0283fd4dd15b4d12e96e02e70d8ccc77f835
    Signed-off-by: Kyösti Mälkki 
---
 SerialICE/simba/memory.lua    | 49 ++++++++++++-------------------------------
 SerialICE/simba/serialice.lua |  1 -
 2 files changed, 13 insertions(+), 37 deletions(-)

diff --git a/SerialICE/simba/memory.lua b/SerialICE/simba/memory.lua
index 4e60bad..b05f09c 100644
--- a/SerialICE/simba/memory.lua
+++ b/SerialICE/simba/memory.lua
@@ -13,12 +13,7 @@ function mem_qemu_rom_pre(f, action)
 end

function mem_rom_post(f, action)
-	if not action.write then
-		return true
-	end
-	-- Writes to ROM space fall-thru to the fallback filter,
-	-- so they get logged there.
-	return false
+	return true
 end

filter_rom_low = {
@@ -81,21 +76,15 @@ end

ram_is_initialized = false

--- This is handled by SerialICE but *NOT* exclusively.
--- Writes end up in Qemu memory, too
-function mem_ram_low(f, action)
-	if ram_is_initialized then
-		-- RAM init is done. Send all RAM accesses
-		-- to Qemu. Using the target as storage would
-		-- only slow execution down.
-		action.to_hw = false
-		action.to_qemu = true
-	else
-		-- RAM init has not been marked done yet.
-		-- so send reads to the target only.
-		action.to_hw = true
-		action.to_qemu = action.write
-	end
+function mem_qemu_only(f, action)
+	action.to_hw = false
+	action.to_qemu = true
+	return true
+end
+
+function mem_target_only(f, action)
+	action.to_hw = true
+	action.to_qemu = false
    return true
 end

@@ -113,14 +102,10 @@ function mem_smi_vga(f, action)
 end

-function mem_post_pre_ram_only(f, action)
-	return ram_is_initialized
-end
-
 filter_ram_low = {
    name = "MEM",
    pre = mem_ram_low,
-	post = mem_post_pre_ram_only,
+	post = mem_post,
    hide = true,
    base = 0x0,
    size = 0xa0000
@@ -138,19 +123,12 @@ filter_smi_vga = {
 filter_ram_low_2 = {
    name = "MEM",
    pre = mem_ram_low,
-	post = mem_post_pre_ram_only,
+	post = mem_post,
    hide = true,
    base = 0xc0000,
    size = 0x20000
 }

-
-function mem_target_only(f, action)
-	action.to_hw = true
-	action.to_qemu = false
-	return true
-end
-
 -- 3.25GB RAM. This is handled by SerialICE.
 -- FIXME: use TOLM here

@@ -160,7 +138,7 @@ end
 filter_ram_high = {
    name = "MEM",
    pre = mem_target_only,
-	post = mem_post_pre_ram_only,
+	post = mem_post,
    hide = true,
    base = 0x100000,
    size = 0xd0000000 - 0x100000
@@ -172,7 +150,6 @@ function ram_enabled()
 end

function enable_ram()
-
    enable_hook(mem_hooks, filter_ram_low)
    enable_hook(mem_hooks, filter_smi_vga)
    enable_hook(mem_hooks, filter_ram_low_2)
diff --git a/SerialICE/simba/serialice.lua b/SerialICE/simba/serialice.lua
index 82a2b03..7cabf67 100644
--- a/SerialICE/simba/serialice.lua
+++ b/SerialICE/simba/serialice.lua
@@ -78,7 +78,6 @@ function do_minimal_setup()
 end

function do_default_setup()
-	enable_ram()
    enable_hook(mem_hooks, filter_lapic)
    enable_hook(mem_hooks, filter_ioapic)
    enable_hook(io_hooks, filter_pci_io_cfg)