The code generation is better if explicit 'struct int13ext_s' and 'struct int13dpt_s' pointers are used instead. The code is a little easier to understand as well.
This patch also forces disk_1348 to not be inlined. If it gets inlined into its caller it can increase the stack usage for all disk calls.
Signed-off-by: Kevin O'Connor kevin@koconnor.net --- src/disk.c | 115 +++++++++++++++++++++++++++++++----------------------------- src/disk.h | 10 ----- 2 files changed, 59 insertions(+), 66 deletions(-)
diff --git a/src/disk.c b/src/disk.c index 9f02a21..080d6cd 100644 --- a/src/disk.c +++ b/src/disk.c @@ -122,8 +122,9 @@ static void noinline extended_access(struct bregs *regs, struct drive_s *drive_g, u16 command) { struct disk_op_s dop; + struct int13ext_s *param_far = (struct int13ext_s*)(regs->si+0); // Get lba and check. - dop.lba = GET_INT13EXT(regs, lba); + dop.lba = GET_FARVAR(regs->ds, param_far->lba); dop.command = command; dop.drive_g = drive_g; if (dop.lba >= GET_GLOBAL(drive_g->sectors)) { @@ -132,8 +133,8 @@ extended_access(struct bregs *regs, struct drive_s *drive_g, u16 command) return; }
- dop.buf_fl = SEGOFF_TO_FLATPTR(GET_INT13EXT(regs, data)); - dop.count = GET_INT13EXT(regs, count); + dop.buf_fl = SEGOFF_TO_FLATPTR(GET_FARVAR(regs->ds, param_far->data)); + dop.count = GET_FARVAR(regs->ds, param_far->count); if (! dop.count) { // Nothing to do. disk_ret(regs, DISK_RET_SUCCESS); @@ -142,7 +143,7 @@ extended_access(struct bregs *regs, struct drive_s *drive_g, u16 command)
int status = send_disk_op(&dop);
- SET_INT13EXT(regs, count, dop.count); + SET_FARVAR(regs->ds, param_far->count, dop.count);
disk_ret(regs, status); } @@ -500,10 +501,12 @@ disk_1347(struct bregs *regs, struct drive_s *drive_g) }
// IBM/MS get drive parameters -static void +static void noinline disk_1348(struct bregs *regs, struct drive_s *drive_g) { - u16 size = GET_INT13DPT(regs, size); + u16 seg = regs->ds; + struct int13dpt_s *param_far = (struct int13dpt_s*)(regs->si+0); + u16 size = GET_FARVAR(seg, param_far->size); u16 t13 = size == 74;
// Buffer is too small @@ -524,27 +527,27 @@ disk_1348(struct bregs *regs, struct drive_s *drive_g) dprintf(DEBUG_HDL_13, "disk_1348 size=%d t=%d chs=%d,%d,%d lba=%d bs=%d\n" , size, type, npc, nph, npspt, (u32)lba, blksize);
- SET_INT13DPT(regs, size, 26); + SET_FARVAR(seg, param_far->size, 26); if (type == DTYPE_ATAPI) { // 0x74 = removable, media change, lockable, max values - SET_INT13DPT(regs, infos, 0x74); - SET_INT13DPT(regs, cylinders, 0xffffffff); - SET_INT13DPT(regs, heads, 0xffffffff); - SET_INT13DPT(regs, spt, 0xffffffff); - SET_INT13DPT(regs, sector_count, (u64)-1); + SET_FARVAR(seg, param_far->infos, 0x74); + SET_FARVAR(seg, param_far->cylinders, 0xffffffff); + SET_FARVAR(seg, param_far->heads, 0xffffffff); + SET_FARVAR(seg, param_far->spt, 0xffffffff); + SET_FARVAR(seg, param_far->sector_count, (u64)-1); } else { if (lba > (u64)npspt*nph*0x3fff) { - SET_INT13DPT(regs, infos, 0x00); // geometry is invalid - SET_INT13DPT(regs, cylinders, 0x3fff); + SET_FARVAR(seg, param_far->infos, 0x00); // geometry is invalid + SET_FARVAR(seg, param_far->cylinders, 0x3fff); } else { - SET_INT13DPT(regs, infos, 0x02); // geometry is valid - SET_INT13DPT(regs, cylinders, (u32)npc); + SET_FARVAR(seg, param_far->infos, 0x02); // geometry is valid + SET_FARVAR(seg, param_far->cylinders, (u32)npc); } - SET_INT13DPT(regs, heads, (u32)nph); - SET_INT13DPT(regs, spt, (u32)npspt); - SET_INT13DPT(regs, sector_count, lba); + SET_FARVAR(seg, param_far->heads, (u32)nph); + SET_FARVAR(seg, param_far->spt, (u32)npspt); + SET_FARVAR(seg, param_far->sector_count, lba); } - SET_INT13DPT(regs, blksize, blksize); + SET_FARVAR(seg, param_far->blksize, blksize);
if (size < 30 || (type != DTYPE_ATA && type != DTYPE_ATAPI && @@ -559,9 +562,9 @@ disk_1348(struct bregs *regs, struct drive_s *drive_g) u16 iobase1 = 0; u64 device_path = 0; u8 channel = 0; - SET_INT13DPT(regs, size, 30); + SET_FARVAR(seg, param_far->size, 30); if (type == DTYPE_ATA || type == DTYPE_ATAPI) { - SET_INT13DPT(regs, dpte, SEGOFF(SEG_LOW, (u32)&DefaultDPTE)); + SET_FARVAR(seg, param_far->dpte, SEGOFF(SEG_LOW, (u32)&DefaultDPTE));
// Fill in dpte struct atadrive_s *adrive_g = container_of( @@ -610,7 +613,7 @@ disk_1348(struct bregs *regs, struct drive_s *drive_g) u8 sum = checksum_far(SEG_LOW, &DefaultDPTE, 15); SET_LOW(DefaultDPTE.checksum, -sum); } else { - SET_INT13DPT(regs, dpte.segoff, 0); + SET_FARVAR(seg, param_far->dpte.segoff, 0); bdf = GET_GLOBAL(drive_g->cntl_id); }
@@ -620,60 +623,60 @@ disk_1348(struct bregs *regs, struct drive_s *drive_g) }
// EDD 3.x - SET_INT13DPT(regs, key, 0xbedd); - SET_INT13DPT(regs, dpi_length, t13 ? 44 : 36); - SET_INT13DPT(regs, reserved1, 0); - SET_INT13DPT(regs, reserved2, 0); + SET_FARVAR(seg, param_far->key, 0xbedd); + SET_FARVAR(seg, param_far->dpi_length, t13 ? 44 : 36); + SET_FARVAR(seg, param_far->reserved1, 0); + SET_FARVAR(seg, param_far->reserved2, 0);
if (bdf != -1) { - SET_INT13DPT(regs, host_bus[0], 'P'); - SET_INT13DPT(regs, host_bus[1], 'C'); - SET_INT13DPT(regs, host_bus[2], 'I'); - SET_INT13DPT(regs, host_bus[3], ' '); + SET_FARVAR(seg, param_far->host_bus[0], 'P'); + SET_FARVAR(seg, param_far->host_bus[1], 'C'); + SET_FARVAR(seg, param_far->host_bus[2], 'I'); + SET_FARVAR(seg, param_far->host_bus[3], ' ');
u32 path = (pci_bdf_to_bus(bdf) | (pci_bdf_to_dev(bdf) << 8) | (pci_bdf_to_fn(bdf) << 16)); if (t13) path |= channel << 24;
- SET_INT13DPT(regs, iface_path, path); + SET_FARVAR(seg, param_far->iface_path, path); } else { // ISA - SET_INT13DPT(regs, host_bus[0], 'I'); - SET_INT13DPT(regs, host_bus[1], 'S'); - SET_INT13DPT(regs, host_bus[2], 'A'); - SET_INT13DPT(regs, host_bus[3], ' '); + SET_FARVAR(seg, param_far->host_bus[0], 'I'); + SET_FARVAR(seg, param_far->host_bus[1], 'S'); + SET_FARVAR(seg, param_far->host_bus[2], 'A'); + SET_FARVAR(seg, param_far->host_bus[3], ' ');
- SET_INT13DPT(regs, iface_path, iobase1); + SET_FARVAR(seg, param_far->iface_path, iobase1); }
if (type != DTYPE_VIRTIO_BLK) { - SET_INT13DPT(regs, iface_type[0], 'A'); - SET_INT13DPT(regs, iface_type[1], 'T'); - SET_INT13DPT(regs, iface_type[2], 'A'); - SET_INT13DPT(regs, iface_type[3], ' '); + SET_FARVAR(seg, param_far->iface_type[0], 'A'); + SET_FARVAR(seg, param_far->iface_type[1], 'T'); + SET_FARVAR(seg, param_far->iface_type[2], 'A'); + SET_FARVAR(seg, param_far->iface_type[3], ' '); } else { - SET_INT13DPT(regs, iface_type[0], 'S'); - SET_INT13DPT(regs, iface_type[1], 'C'); - SET_INT13DPT(regs, iface_type[2], 'S'); - SET_INT13DPT(regs, iface_type[3], 'I'); + SET_FARVAR(seg, param_far->iface_type[0], 'S'); + SET_FARVAR(seg, param_far->iface_type[1], 'C'); + SET_FARVAR(seg, param_far->iface_type[2], 'S'); + SET_FARVAR(seg, param_far->iface_type[3], 'I'); } - SET_INT13DPT(regs, iface_type[4], ' '); - SET_INT13DPT(regs, iface_type[5], ' '); - SET_INT13DPT(regs, iface_type[6], ' '); - SET_INT13DPT(regs, iface_type[7], ' '); + SET_FARVAR(seg, param_far->iface_type[4], ' '); + SET_FARVAR(seg, param_far->iface_type[5], ' '); + SET_FARVAR(seg, param_far->iface_type[6], ' '); + SET_FARVAR(seg, param_far->iface_type[7], ' ');
if (t13) { - SET_INT13DPT(regs, t13.device_path[0], device_path); - SET_INT13DPT(regs, t13.device_path[1], 0); + SET_FARVAR(seg, param_far->t13.device_path[0], device_path); + SET_FARVAR(seg, param_far->t13.device_path[1], 0);
- SET_INT13DPT(regs, t13.checksum - , -checksum_far(regs->ds, (void*)(regs->si+30), 43)); + SET_FARVAR(seg, param_far->t13.checksum + , -checksum_far(seg, (void*)param_far+30, 43)); } else { - SET_INT13DPT(regs, phoenix.device_path, device_path); + SET_FARVAR(seg, param_far->phoenix.device_path, device_path);
- SET_INT13DPT(regs, phoenix.checksum - , -checksum_far(regs->ds, (void*)(regs->si+30), 35)); + SET_FARVAR(seg, param_far->phoenix.checksum + , -checksum_far(seg, (void*)param_far+30, 35)); }
disk_ret(regs, DISK_RET_SUCCESS); diff --git a/src/disk.h b/src/disk.h index 6c7d8fe..68e866d 100644 --- a/src/disk.h +++ b/src/disk.h @@ -40,11 +40,6 @@ struct int13ext_s { u64 lba; } PACKED;
-#define GET_INT13EXT(regs,var) \ - GET_FARVAR((regs)->ds, ((struct int13ext_s*)((regs)->si+0))->var) -#define SET_INT13EXT(regs,var,val) \ - SET_FARVAR((regs)->ds, ((struct int13ext_s*)((regs)->si+0))->var, (val)) - // DPTE definition struct dpte_s { u16 iobase1; @@ -94,11 +89,6 @@ struct int13dpt_s { }; } PACKED;
-#define GET_INT13DPT(regs,var) \ - GET_FARVAR((regs)->ds, ((struct int13dpt_s*)((regs)->si+0))->var) -#define SET_INT13DPT(regs,var,val) \ - SET_FARVAR((regs)->ds, ((struct int13dpt_s*)((regs)->si+0))->var, (val)) - // Floppy "Disk Base Table" struct floppy_dbt_s { u8 specify1;
-
Kevin O'Connor