Commits
d6bdb85eb0 virtio-scsi: skip initializing non-bootable devices f82e82a5ab2 virtio-mmio: add support for scsi devices.
both use the lun value from tmpl_drv, which is always 0, instead of the correct one passed as a separate parameter. This causes systems where LUNs other than 0 are set as bootable, but 0 is not, to not boot.
Reviewed-by: Paul Menzel pmenzel@molgen.mpg.de Signed-off-by: Stefan Reiter s.reiter@proxmox.com ---
v2: * sep*a*rate :) * collect Paul's R-b
src/hw/virtio-scsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/src/hw/virtio-scsi.c b/src/hw/virtio-scsi.c index 59f1c65..369c981 100644 --- a/src/hw/virtio-scsi.c +++ b/src/hw/virtio-scsi.c @@ -126,14 +126,14 @@ virtio_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) int prio = -1;
if (tmpl_vlun->pci) - prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, tmpl_vlun->lun); + prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, lun); if (tmpl_vlun->mmio) - prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, tmpl_vlun->target, tmpl_vlun->lun); + prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, tmpl_vlun->target, lun);
if (skip_nonbootable && prio < 0) { dprintf(1, "skipping init of a non-bootable virtio-scsi dev at %s," " target %d, lun %d\n", - tmpl_vlun->name, tmpl_vlun->target, tmpl_vlun->lun); + tmpl_vlun->name, tmpl_vlun->target, lun); return -1; }
On Mon, Jul 27, 2020 at 03:14:15PM +0200, Stefan Reiter wrote:
Commits
d6bdb85eb0 virtio-scsi: skip initializing non-bootable devices f82e82a5ab2 virtio-mmio: add support for scsi devices.
both use the lun value from tmpl_drv, which is always 0, instead of the correct one passed as a separate parameter. This causes systems where LUNs other than 0 are set as bootable, but 0 is not, to not boot.
Thanks. I committed this change.
-Kevin
-
Kevin O'Connor -
Stefan Reiter