Add support for legacy USB keyboard/mouse (PS/2 emulation for USB?)
Hello, I think this is the right place to write about this. From a few days I'm fighting with not USB-aware OS-es in QEMU (like Windows 98, IBM OS/2, MS-DOS etc.). When I assign real USB keyboard and mouse to VM, keyboard partially works in DOS (keys like Alt aren't working), but mouse doesn't work at all. After starting, let's say Windows 98 Setup, keyboard stops working too. From my experience these peripherals works only in newer OSes like Windows 2000+ or Linux, because they initialize their own USB HID driver. I'm not using QEMU's emulated USB HID devices, because I utilize VGA passthrough, so I need direct access from guest machine. Summarizing: is it possible to add full support for USB keyboard and mouse in SeaBIOS? P.S. I apologize for any grammatical errors.
On Sat, Apr 16, 2016 at 01:26:43AM +0200, Adam Rutkowski wrote:
Hello,
I think this is the right place to write about this. From a few days I'm fighting with not USB-aware OS-es in QEMU (like Windows 98, IBM OS/2, MS-DOS etc.). When I assign real USB keyboard and mouse to VM, keyboard partially works in DOS (keys like Alt aren't working), but mouse doesn't work at all.
In my quick tests on freedos, both the usb keyboard alt key and usb mouse work. That said, I don't doubt old DOS device drivers and old OSes (eg, win98) would attempt to directly access the ps2 hardware and thus not benefit from the SeaBIOS USB drivers.
After starting, let's say Windows 98 Setup, keyboard stops working too. From my experience these peripherals works only in newer OSes like Windows 2000+ or Linux, because they initialize their own USB HID driver. I'm not using QEMU's emulated USB HID devices, because I utilize VGA passthrough, so I need direct access from guest machine.
Summarizing: is it possible to add full support for USB keyboard and mouse in SeaBIOS?
Unfortunately, emulating a ps2 keyboard/mouse in SeaBIOS is very difficult, and I don't think it's practical. However, it should be easy to have QEMU emulate a ps2 keyboard/mouse. It should also be possible to do that emulation even if the VGA is in passthrough. -Kevin
On 16.04.2016 at 03:03, Kevin O'Connor wrote:
On Sat, Apr 16, 2016 at 01:26:43AM +0200, Adam Rutkowski wrote:
Hello,
I think this is the right place to write about this. From a few days I'm fighting with not USB-aware OS-es in QEMU (like Windows 98, IBM OS/2, MS-DOS etc.). When I assign real USB keyboard and mouse to VM, keyboard partially works in DOS (keys like Alt aren't working), but mouse doesn't work at all. In my quick tests on freedos, both the usb keyboard alt key and usb mouse work. That said, I don't doubt old DOS device drivers and old OSes (eg, win98) would attempt to directly access the ps2 hardware and thus not benefit from the SeaBIOS USB drivers. I also tested FreeDOS both in QEMU standard emulation and with VGA passthrough. In standard SDL window, both keyboard and mouse are emulated properly and everything works fine, but not when passing real graphics card to KVM. In this mode, I need to forward my real keyboard and mouse to guest (because QEMU is running in with -nographic) and then the weird things happen. Keyboard works, but only when program doesn't take control over it. Alt key sometimes works, sometimes not. Numeric keypad doesn't work at all (Numlock LED is on and can't be turned off). Mouse doesn't work anywhere. I tried FreeDOS edit and the block cursor doesn't move. Additionally, after launching FreeDOS Shell (dosshell.exe) keyboard stops working.
After starting, let's say Windows 98 Setup, keyboard stops working too. From my experience these peripherals works only in newer OSes like Windows 2000+ or Linux, because they initialize their own USB HID driver. I'm not using QEMU's emulated USB HID devices, because I utilize VGA passthrough, so I need direct access from guest machine.
Summarizing: is it possible to add full support for USB keyboard and mouse in SeaBIOS? Unfortunately, emulating a ps2 keyboard/mouse in SeaBIOS is very difficult, and I don't think it's practical.
However, it should be easy to have QEMU emulate a ps2 keyboard/mouse. It should also be possible to do that emulation even if the VGA is in passthrough.
-Kevin This is my command I'm using to run FreeDOS in PCI/VGA passthrough mode using vfio: qemu-system-x86_64 -nographic -hda /mnt/freedos.qcow2 -vga none -enable-kvm -m 512 -cpu host -localtime -smp 4 -device vfio-pci,host=01:00.0,x-vga=on -device vfio-pci,host=01:00.1 -netdev user,id=net0 -device rtl8139,netdev=net0 -usb -device usb-host,vendorid=0x09da,productid=0x9090 -device usb-host,vendorid=0x046d,productid=0xc31b
I was looking for other methods to use keys and mouse, but I couldn't find anything other than USB host-to-guest. Adam
Hi,
initialize their own USB HID driver. I'm not using QEMU's emulated USB HID devices, because I utilize VGA passthrough, so I need direct access from guest machine.
Better use the emulated ps/2 devices. Starting with qemu 2.6 qemu can read input events directly from linux evdev devices. With older versions you have to use a dummy sdl/gtk/vnc device to feed qemu with input events. cheers, Gerd
participants (3)
-
Adam Rutkowski -
Gerd Hoffmann -
Kevin O'Connor