On 11 Oct 2012 16:42, "Christian Gmeiner" <christian.gmeiner@gmail.com> wrote:
>
> Christian Gmeiner, MSc
>
>
> 2012/10/11 Christian Gmeiner <christian.gmeiner@gmail.com>:
> > 2012/10/11 Kevin O'Connor <kevin@koconnor.net>:
> >> On Tue, Oct 09, 2012 at 02:31:05PM +0200, Christian Gmeiner wrote:
> >>> 2012/10/9 Kevin O'Connor <kevin@koconnor.net>:
> >>> > On Mon, Oct 08, 2012 at 02:14:03PM +0200, Christian Gmeiner wrote:
> >>> >> HI all
> >>> >>
> >>> >> I am running into some usb problems with coreboot & seabios:
> >>> > Can you set the debug level to 8 and post the whole log? Also, for
> >>> > timeout issues, having timestamps (via tools/readserial.py tool)
> >>> > sometimes helps.
> >>>
> >>> Attached
> >>
> >> Hrmm, I guess you've disabled threads in your config?
> >>
> > yep...
> >
> >
> >> From your log, I see:
> >>
> >> [14:23:00.5] ehci_send_bulk qh=0x000ef680 dir=0 data=0x00006d55 size=31^M
> >> [14:23:00.5] ehci_send_bulk qh=0x000ef700 dir=128 data=0x00006e3c size=36^M
> >> [14:23:00.5] ehci_send_bulk qh=0x000ef700 dir=128 data=0x00006d8f size=13^M
> >> [14:23:05.5] WARNING - Timeout at ehci_wait_td:542!^M
> >> [14:23:05.5] ehci pipe=0x000ef700 cur=00000000 tok=00000000 next=6b80 td=0x00006b80
> >> +status=d0d80^M
> >> [14:23:05.5] USB transmission failed^M
> >> [14:23:05.5] Unable to configure USB MSC drive.^M
> >>
> >> This looks like the transfer is stalling in the cdb_get_inquiry() call
> >> as part of scsi_init_drive(). The drive is identified okay and at
> >> least some transfers look okay, so it doesn't appear to be a
> >> controller issue.
> >>
> >> I've been told some USB sticks are very picky about init order, but
> >> I'm surprised to see that this is occuring for you on a variety of USB
> >> sticks.
> >>
> >> It's possible to verify that a stall has occurred - print out
> >> tds[i].token for all tds in ehci_send_bulk() on the error path.
> >>
> >> Does this device still have problems if you soft-reset after a failed
> >> boot?
> >>
> >
> > Here are the results with some more debug:
> >
> > Cold Reboot
> > ------------
> >
> > |0f7a5000| pmm_malloc zone=0x0f7afe87 handle=ffffffff size=192
> > align=40 ret=0x0f7a7bc0 (detail=0x0f7a7d70)
> > |0f7a5000| ehci_control: td at phys(f7a7bc0): status: 80 : token 80e80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_control: td at phys(f7a7c00): status: 0 : token d00
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_control: td at phys(f7a7c40): status: 0 : token 0
> > |0f7a5000| - cerr: 0, total_len: 0
> > |0f7a5000| pmm_free 0x0f7a7bc0 (detail=0x0f7a7d70)
> > |0f7a5000| ehci_alloc_async_pipe 0x0f7a9090 2
> > |0f7a5000| pmm_malloc zone=0x0f7afe7f handle=ffffffff size=92 align=80
> > ret=0x000ef700 (detail=0x0f7a7d70)
> > |0f7a5000| ehci_alloc_async_pipe 0x0f7a9090 2
> > |0f7a5000| pmm_malloc zone=0x0f7afe7f handle=ffffffff size=92 align=80
> > ret=0x000ef680 (detail=0x0f7a7d10)
> > |0f7a5000| ehci_control 0x0f7a7cd0 (dir=128 cmd=8 data=1)
> > |0f7a5000| pmm_malloc zone=0x0f7afe87 handle=ffffffff size=192
> > align=40 ret=0x0f7a7bc0 (detail=0x0f7a7ce0)
> > |0f7a5000| ehci_control: td at phys(f7a7bc0): status: 80 : token 80e80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_control: td at phys(f7a7c00): status: 0 : token d00
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_control: td at phys(f7a7c40): status: 0 : token 1c00
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| pmm_free 0x0f7a7bc0 (detail=0x0f7a7ce0)
> > |0f7a5000| pmm_malloc zone=0x0f7afe83 handle=ffffffff size=48 align=10
> > ret=0x000fdae0 (detail=0x0f7a7ce0)
> > |0f7a5000| usb_cmd_data id=0x000fdae0 write=0 count=1 bs=36 buf=0x0f7a5f3c
> > |0f7a5000| cbw to device
> > |0f7a5000| ehci_send_bulk qh=0x000ef680 dir=0 data=0x0f7a5e65 size=31
> > |0f7a5000| before setup: td at phys(f7a5c80): status: 0 : token 0
> > |0f7a5000| - cerr: 0, total_len: 0
> > |0f7a5000| ehci_send_bulk: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| Data-In from the device to the host - 36 bytes
> > |0f7a5000| ehci_send_bulk qh=0x000ef700 dir=128 data=0x0f7a5f3c size=36
> > |0f7a5000| before setup: td at phys(f7a5c80): status: 0 : token 0
> > |0f7a5000| - cerr: 0, total_len: 0
> > |0f7a5000| ehci_send_bulk: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token d80
> > |0f7a5000| - cerr: 3, total_len: 0
> >
> >
> > Warm Reboot
> > -----------
> >
> > 0f7a5000| pmm_free 0x0f7a7bc0 (detail=0x0f7a7d70)
> > |0f7a5000| ehci_alloc_async_pipe 0x0f7a9090 2
> > |0f7a5000| pmm_malloc zone=0x0f7afe7f handle=ffffffff size=92 align=80
> > ret=0x000ef700 (detail=0x0f7a7d70)
> > |0f7a5000| ehci_alloc_async_pipe 0x0f7a9090 2
> > |0f7a5000| pmm_malloc zone=0x0f7afe7f handle=ffffffff size=92 align=80
> > ret=0x000ef680 (detail=0x0f7a7d10)
> > |0f7a5000| ehci_control 0x0f7a7cd0 (dir=128 cmd=8 data=1)
> > |0f7a5000| pmm_malloc zone=0x0f7afe87 handle=ffffffff size=192
> > align=40 ret=0x0f7a7bc0 (detail=0x0f7a7ce0)
> > |0f7a5000| ehci_control: td at phys(f7a7bc0): status: 80 : token 80e80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_control: td at phys(f7a7c00): status: 0 : token d00
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_control: td at phys(f7a7c40): status: 0 : token 1c00
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| pmm_free 0x0f7a7bc0 (detail=0x0f7a7ce0)
> > |0f7a5000| pmm_malloc zone=0x0f7afe83 handle=ffffffff size=48 align=10
> > ret=0x000fdae0 (detail=0x0f7a7ce0)
> > |0f7a5000| usb_cmd_data id=0x000fdae0 write=0 count=1 bs=36 buf=0x0f7a5f3c
> > |0f7a5000| cbw to device
> > |0f7a5000| ehci_send_bulk qh=0x000ef680 dir=0 data=0x0f7a5e65 size=31
> > |0f7a5000| before setup: td at phys(f7a5c80): status: 0 : token 0
> > |0f7a5000| - cerr: 0, total_len: 0
> > |0f7a5000| ehci_send_bulk: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> > |0f7a5000| ehci_wait_td: td at phys(f7a5c80): status: 80 : token c80
> > |0f7a5000| - cerr: 3, total_len: 0
> >
> >
> > This is the used patch:
> >
> > diff --git a/src/usb-ehci.c b/src/usb-ehci.c
> > index 2676615..92a9c60 100644
> > --- a/src/usb-ehci.c
> > +++ b/src/usb-ehci.c
> > @@ -178,6 +178,14 @@ check_ehci_ports(struct usb_ehci_s *cntl)
> > * Setup
> > ****************************************************************/
> >
> > +static void dump_td(struct ehci_qtd *td, const char *func)
> > +{
> > + u32 addr = (u32)td;
> > + dprintf(1, "%s: td at phys(%x): status: %x : token %x\n", func,
> > addr, td->token & QTD_STS_MASK, td->token);
> > + dprintf(1, "- cerr: %x, total_len: %x\n", (td->token &
> > QTD_CERR_MASK) >> QTD_CERR_SHIFT,
> > + (td->token & QTD_LENGTH_MASK) >> QTD_LENGTH_SHIFT);
> > +}
> > +
> > // Wait for next USB async frame to start - for ensuring safe memory release.
> > static void
> > ehci_waittick(struct usb_ehci_s *cntl)
> > @@ -535,6 +543,9 @@ ehci_wait_td(struct ehci_pipe *pipe, struct
> > ehci_qtd *td, int timeout)
> > status = td->token;
> > if (!(status & QTD_STS_ACTIVE))
> > break;
> > +
> > + dump_td(td, __func__);
> > +
> > if (check_tsc(end)) {
> > u32 cur = GET_LOWFLAT(pipe->qh.current);
> > u32 tok = GET_LOWFLAT(pipe->qh.token);
> > @@ -633,6 +644,7 @@ ehci_control(struct usb_pipe *p, int dir, const
> > void *cmd, int cmdsize
> > int i, ret=0;
> > for (i=0; i<3; i++) {
> > struct ehci_qtd *td = &tds[i];
> > + dump_td(td, __func__);
> > ret = ehci_wait_td(pipe, td, 500);
> > if (ret)
> > break;
> > @@ -665,18 +677,25 @@ ehci_send_bulk(struct usb_pipe *p, int dir, void
> > *data, int datasize)
> > struct ehci_qtd *td = &tds[tdpos++ % STACKQTDS];
> > int ret = ehci_wait_td(pipe, td, 5000);
> > if (ret)
> > + {
> > + dump_td(td, "ehci_send_bulk ERROR2");
> > return -1;
> > + }
> >
> > struct ehci_qtd *nexttd_fl = MAKE_FLATPTR(GET_SEG(SS)
> > , &tds[tdpos % STACKQTDS]);
> >
> > + dump_td(td, "before setup");
> > +
> > int transfer = fillTDbuffer(td, maxpacket, data, datasize);
> > td->qtd_next = (transfer==datasize ? EHCI_PTR_TERM : (u32)nexttd_fl);
> > td->alt_next = EHCI_PTR_TERM;
> > barrier();
> > - td->token = (ehci_explen(transfer) | QTD_STS_ACTIVE
> > + td->token = (/*ehci_explen(transfer) | */QTD_STS_ACTIVE
> > | (dir ? QTD_PID_IN : QTD_PID_OUT) | ehci_maxerr(3));
> >
> > + dump_td(td, __func__);
> > +
> > data += transfer;
> > datasize -= transfer;
> > }
> > @@ -685,7 +704,10 @@ ehci_send_bulk(struct usb_pipe *p, int dir, void
> > *data, int datasize)
> > struct ehci_qtd *td = &tds[tdpos++ % STACKQTDS];
> > int ret = ehci_wait_td(pipe, td, 5000);
> > if (ret)
> > + {
> > + dump_td(td, "ehci_send_bulk ERROR2");
> > return -1;
> > + }
> > }
> >
> > return 0;
> >
> >
> >
> > greets
>
>
> Here is the log of filo using libpayload
>
> [16:40:24.5] FILO version 0.6.0 (christian@chgm-pc) Thu Oct 11
> 16:12:26 CEST 2012
> [16:40:24.5] 00:0f.5 2095:1022.5 EHCI controller
> [16:40:24.7] highspeed device
> [16:40:24.7] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:24.8] - cerr: 3, total_len: 0
>
> [16:40:24.8] wait_for_tds done: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:24.8] - cerr: 3, total_len: 0
>
>
> [16:40:24.8] moving from 148260 to 1482a0
> [16:40:24.8] wait_for_tds: td at phys(1f6b22a0): status: 0 token: 100
>
> [16:40:24.8] - cerr: 0, total_len: 0
>
> [16:40:24.8] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:24.8] - cerr: 3, total_len: 0
>
> [16:40:24.8] wait_for_tds done: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:24.9] - cerr: 3, total_len: 0
>
>
> [16:40:24.9] moving from 148260 to 1482a0
> [16:40:24.9] wait_for_tds: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:25.0] - cerr: 3, total_len: 0
>
> [16:40:25.0] wait_for_tds done: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:25.0] - cerr: 3, total_len: 0
>
>
> [16:40:25.1] moving from 1482a0 to 1482e0
> [16:40:25.1] wait_for_tds: td at phys(1f6b22e0): status: 0 token: 1000
>
> [16:40:25.2] - cerr: 0, total_len: 0
>
> [16:40:25.2] maxPacketSize0: 40
> [16:40:25.2] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:25.2] - cerr: 3, total_len: 0
>
> [16:40:25.3] wait_for_tds done: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:25.3] - cerr: 3, total_len: 0
>
>
> [16:40:25.4] moving from 148260 to 1482a0
> [16:40:25.4] wait_for_tds: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:25.5] - cerr: 3, total_len: 0
>
> [16:40:25.5] wait_for_tds done: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:25.5] - cerr: 3, total_len: 0
>
>
> [16:40:25.6] moving from 1482a0 to 1482e0
> [16:40:25.6] wait_for_tds: td at phys(1f6b22e0): status: 0 token: 1000
>
> [16:40:25.7] - cerr: 0, total_len: 0
>
> [16:40:25.7] * found device (0x1370:0x3252, USB 2.0)
> [16:40:25.7] device has 1 configurations
> [16:40:25.7] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:25.8] - cerr: 3, total_len: 0
>
> [16:40:25.8] wait_for_tds done: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:25.9] - cerr: 3, total_len: 0
>
>
> [16:40:25.9] moving from 148260 to 1482a0
> [16:40:26.0] wait_for_tds: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:26.0] - cerr: 3, total_len: 0
>
> [16:40:26.0] wait_for_tds done: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:26.1] - cerr: 3, total_len: 0
>
>
> [16:40:26.1] moving from 1482a0 to 1482e0
> [16:40:26.1] wait_for_tds: td at phys(1f6b22e0): status: 0 token: 1000
>
> [16:40:26.2] - cerr: 0, total_len: 0
>
> [16:40:26.2] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:26.3] - cerr: 3, total_len: 0
>
> [16:40:26.3] wait_for_tds done: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:26.4] - cerr: 3, total_len: 0
>
>
> [16:40:26.4] moving from 148260 to 1482a0
> [16:40:26.4] wait_for_tds: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:26.5] - cerr: 3, total_len: 0
>
> [16:40:26.5] wait_for_tds done: td at phys(1f6b22a0): status: 0 token: d00
>
> [16:40:26.6] - cerr: 3, total_len: 0
>
>
> [16:40:26.6] moving from 1482a0 to 1482e0
> [16:40:26.7] wait_for_tds: td at phys(1f6b22e0): status: 0 token: 1000
>
> [16:40:26.7] - cerr: 0, total_len: 0
>
> [16:40:26.7] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:26.8] - cerr: 3, total_len: 0
>
> [16:40:26.8] wait_for_tds done: td at phys(1f6b2260): status: 0 token: 80000e00
>
> [16:40:26.8] - cerr: 3, total_len: 0
>
>
> [16:40:26.9] moving from 148260 to 1482a0
> [16:40:26.9] wait_for_tds: td at phys(1f6b22a0): status: 0 token: 100
>
> [16:40:27.0] - cerr: 0, total_len: 0
>
> [16:40:27.0] device has 1 interfaces
> [16:40:27.0] #0 has 2 endpoints, interface 8:6, protocol 50
> [16:40:27.0] #1: Endpoint 1 (in), max packet size 200, type bulk
> [16:40:27.1] #2: Endpoint 2 (out), max packet size 200, type bulk
> [16:40:27.1] , class: MSC
> [16:40:27.1] Waiting for device to become ready...ehci_bulk: setup:
> td at phys(148260): status: 0 token: 0
>
> [16:40:27.2] - cerr: 0, total_len: 0
>
> [16:40:27.2] wait_for_tds: td at phys(1f6b2260): status: 1 token: 80000001
>
> [16:40:27.3] - cerr: 0, total_len: 0
>
> [16:40:27.3] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:27.3] - cerr: 0, total_len: 0
>
> [16:40:27.4] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000100
>
> [16:40:27.4] - cerr: 0, total_len: 0
>
> [16:40:27.5] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:27.5] - cerr: 0, total_len: 0
>
> [16:40:27.5] wait_for_tds: td at phys(1f6b2260): status: 1 token: 1
>
> [16:40:27.6] - cerr: 0, total_len: 0
>
> [16:40:27.6] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:27.7] - cerr: 0, total_len: 0
>
> [16:40:27.7] wait_for_tds: td at phys(1f6b2260): status: 0 token: 100
>
> [16:40:27.7] - cerr: 0, total_len: 0
>
> [16:40:27.8] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:27.8] - cerr: 0, total_len: 0
>
> [16:40:27.9] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000100
>
> [16:40:27.9] - cerr: 0, total_len: 0
>
> [16:40:28.1] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:28.1] - cerr: 0, total_len: 0
>
> [16:40:28.2] wait_for_tds: td at phys(1f6b2260): status: 1 token: 80000001
>
> [16:40:28.2] - cerr: 0, total_len: 0
>
> [16:40:28.2] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:28.3] - cerr: 0, total_len: 0
>
> [16:40:28.3] wait_for_tds: td at phys(1f6b2260): status: 0 token: 100
>
> [16:40:28.3] - cerr: 0, total_len: 0
>
> [16:40:28.4] ok.
> [16:40:28.4] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:28.4] - cerr: 0, total_len: 0
>
> [16:40:28.5] wait_for_tds: td at phys(1f6b2260): status: 1 token: 1
>
> [16:40:28.5] - cerr: 0, total_len: 0
>
> [16:40:28.6] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:28.6] - cerr: 0, total_len: 0
>
> [16:40:28.6] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000100
>
> [16:40:28.7] - cerr: 0, total_len: 0
>
> [16:40:28.7] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:28.8] - cerr: 0, total_len: 0
>
> [16:40:28.8] wait_for_tds: td at phys(1f6b2260): status: 1 token: 80000001
>
> [16:40:28.9] - cerr: 0, total_len: 0
>
> [16:40:28.9] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:28.9] - cerr: 0, total_len: 0
>
> [16:40:29.0] wait_for_tds: td at phys(1f6b2260): status: 0 token: 100
>
> [16:40:29.0] - cerr: 0, total_len: 0
>
> [16:40:29.1] ehci_bulk: setup: td at phys(148260): status: 0 token: 0
>
> [16:40:29.1] - cerr: 0, total_len: 0
>
> [16:40:29.2] wait_for_tds: td at phys(1f6b2260): status: 0 token: 80000100
>
> [16:40:29.2] - cerr: 0, total_len: 0
>
> [16:40:29.2] 15663104 512-byte sectors (8019 MB)
> [16:40:29.3] 00:0f.4 2094:1022.4 OHCI controller
> [16:40:29.3] OHCI Version 1.0
> [16:40:29.4] ERROR: No such CMOS option (boot_devices)
> [16:40:29.4] menu: hda3:/boot/filo/menu.lst
>
Kevin do you have an idea what could be wrong?
---
Christian Gmeiner, MSc