On Wed, Mar 01, 2017 at 01:45:33PM +0300, Roman Kagan wrote:
A number of SCSI drivers currently only see luns #0 in their
This may be a problem when drives have to be assigned bigger lun
numbers, e.g. because the storage controllers don't provide enough
target numbers to accomodate all drives.
(In particular, I'm about to submit a driver for Hyper-V VMBus SCSI
controller which is limited to 2 targets only).
This series adds generic SCSI lun enumeration (either via REPORT LUNS
command or sequentially trying every lun), and makes the respective
drivers use it.
Thanks. Let me make sure I understand this series. Some scsi
controllers have hardware specific mechanisms for finding the number
of luns (usb-msc, megasas, pvscsi) and some controllers use a generic
REPORT LUNS mechanism (virtio-scsi, esp-scsi, usb-uas, mpt-scsi,
The basic difficulty with implementing REPORT LUNS in seabios is that
the code needs a "struct drive_s" to issue the REPORT LUNS command,
but since the drive parameters (or even the number of drives) aren't
known, a dummy "lun0" drive_s must be created just for REPORT LUNS.
Thus the series breaks the driver xxx_add_lun() functions into
xxx_init_lun() and xxx_add_lun() so that a dummy lun0 can be created.
An additional complexity is that the REPORT LUNS mechanism is broken
in current QEMU on lsi-scsi and mpt-scsi.
Your goal is to add support for "Hyper-V VMBus SCSI" which also
requires REPORT LUNS.
Is the above correct?