On Tue, Aug 22, 2017 at 02:43:39PM +0300, Marcel Apfelbaum wrote:
> On 18/08/2017 2:36, Aleksandr Bezzubikov wrote:
> > This series introduces a new device - Generic PCI Express to PCI bridge,
> > and also makes all necessary changes to enable hotplug of the bridge itself
> > and any device into the bridge.
> >
>
> Hi,
>
> Series
> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
> (focused on changes from v6)
>
>
> Michael, will Alecsandr need to re-send it after freeze?
re-send or ping pls.
Michael, it seems that freeze is over, so you can pick this patches.
> I am asking because the GSOC project is ending in a week or so.
>
>
> Thanks,
> Marcel
>
> > Changes v6->v7:
> > Change IO/MEM/PREF reservation properties type to SIZE.
> >
> > Changes v5->v6:
> > 1. Fix indentation in the cap creation function (addresses Marcel's comment)
> > 2. Simplify capability pref_mem_* fields assignment (addresses Marcel's comment)
> > 3. Documentation fixes:
> > - fix mutually exclusive fields definition (addresses Laszlo's comment)
> > - fix pcie-pci-bridge usage example (addresses Marcel's comment)
> >
> > Changes v4->v5:
> > 1. Change PCIE-PCI Bridge license (addresses Marcel's comment)
> > 2. The capability layout changes (adress Laszlo' comments):
> > - separate pref_mem into pref_mem_32 and pref_mem_64 fields (SeaBIOS side has the same changes)
> > - accordingly change the Generic Root Port's properties
> > 3. Do not add the capability to the root port if no valid values are provided (adresses Michael's comment)
> > 4. Rename the capability type to 'RESOURCE_RESERVE' (addresses Marcel's comment)
> > 5. Remove shpc_present check function (addresses Marcel's comment)
> > 6. Fix the 4th patch message (adresses Michael's comment)
> > 7. Patch for SHPC enabling in _OSC method has been already merged
> >
> > Changes v3->v4:
> > 1. PCIE-PCI Bridge device: "msi_enable"->"msi", "shpc"->"shpc_bar", remove local_err,
> > make "msi" property OnOffAuto, shpc_present() is still here
> > to avoid SHPC_VMSTATE refactoring (address Marcel's comments).
> > 2. Change QEMU PCI capability layout (SeaBIOS side has the same changes):
> > - change reservation fields types: bus_res - uint32_t, others - uint64_t
> > - rename 'non_pref' and 'pref' fields
> > - interpret -1 value as 'ignore'
> > 3. Use parent_realize in Generic PCI Express Root Port properly.
> > 4. Fix documentation: fully replace the DMI-PCI bridge references with the new PCIE-PCI bridge,
> > "PCIE"->"PCI Express", small mistakes and typos - address Laszlo's and Marcel's comments.
> > 5. Rename QEMU PCI cap creation fucntion - addresses Marcel's comment.
> >
> > Changes v2->v3:
> > (0). 'do_not_use' capability field flag is still _not_ in here since we haven't come to consesus on it yet.
> > 1. Merge commits 5 (bus_reserve property creation) and 6 (property usage) together - addresses Michael's comment.
> > 2. Add 'bus_reserve' property and QEMU PCI capability only to Generic PCIE Root Port - addresses Michael's and Marcel's comments.
> > 3. Change 'bus_reserve' property's default value to 0 - addresses Michael's comment.
> > 4. Rename QEMU bridge-specific PCI capability creation function - addresses Michael's comment.
> > 5. Init the whole QEMU PCI capability with zeroes - addresses Michael's and Laszlo's comments.
> > 6. Change QEMU PCI capability layout (SeaBIOS side has the same changes)
> > - add 'type' field to distinguish multiple
> > RedHat-specific capabilities - addresses Michael's comment
> > - do not mimiс PCI Config space register layout, but use mutually exclusive differently
> > sized fields for IO and prefetchable memory limits - addresses Laszlo's comment
> > 7. Correct error handling in PCIE-PCI bridge realize function.
> > 8. Replace a '2' constant with PCI_CAP_FLAGS in the capability creation function - addresses Michael's comment.
> > 9. Remove a comment on _OSC which isn't correct anymore - address Marcel's comment.
> > 10. Add documentation for the Generic PCIE-PCI Bridge and QEMU PCI capability - addresses Michael's comment.
> >
> > Changes v1->v2:
> > 1. Enable SHPC for the bridge.
> > 2. Enable SHPC support for the Q35 machine (ACPI stuff).
> > 3. Introduce PCI capability to help firmware on the system init.
> > This allows the bridge to be hotpluggable. Now it's supported
> > only for pcie-root-port. Now it's supposed to used with
> > SeaBIOS only, look at the SeaBIOS corresponding series
> > "Allow RedHat PCI bridges reserve more buses than necessary during init".
> >
> > Aleksandr Bezzubikov (4):
> > hw/pci: introduce pcie-pci-bridge device
> > hw/pci: introduce bridge-only vendor-specific capability to provide
> > some hints to firmware
> > hw/pci: add QEMU-specific PCI capability to the Generic PCI Express
> > Root Port
> > docs: update documentation considering PCIE-PCI bridge
> >
> > docs/pcie.txt | 49 +++++-----
> > docs/pcie_pci_bridge.txt | 114 ++++++++++++++++++++++
> > hw/pci-bridge/Makefile.objs | 2 +-
> > hw/pci-bridge/gen_pcie_root_port.c | 36 +++++++
> > hw/pci-bridge/pcie_pci_bridge.c | 192 +++++++++++++++++++++++++++++++++++++
> > hw/pci/pci_bridge.c | 46 +++++++++
> > include/hw/pci/pci.h | 1 +
> > include/hw/pci/pci_bridge.h | 25 +++++
> > include/hw/pci/pcie_port.h | 1 +
> > 9 files changed, 442 insertions(+), 24 deletions(-)
> > create mode 100644 docs/pcie_pci_bridge.txt
> > create mode 100644 hw/pci-bridge/pcie_pci_bridge.c
> >