SeaBIOS (version rel-1.9.0-43-g76327b9-dirty-20151223_191828-navi)
BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25
Attempting to find coreboot table
Found coreboot table forwarder.
Now attempting to find coreboot memory map
SeaBIOS (version rel-1.9.0-43-g76327b9-dirty-20151223_191828-navi)
BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25
Found coreboot cbmem console @ dffde000
Found mainboard PC Engines APU1
malloc preinit
Relocating init from 0x000e4800 to 0xdfc0b9e0 (size 46464)
malloc init
Found CBFS header at 0xffe00138
Add romfile: cbfs master header (size=32)
Add romfile: fallback/romstage (size=168724)
Add romfile: fallback/ramstage (size=126226)
Add romfile: fallback/payload (size=60767)
Add romfile: config (size=282)
Add romfile: revision (size=569)
Add romfile: cmos.default (size=256)
Add romfile: cmos_layout.bin (size=796)
Add romfile: fallback/dsdt.aml (size=9847)
Add romfile: spd.bin (size=256)
Add romfile: payload_config (size=1585)
Add romfile: payload_revision (size=265)
Add romfile: etc/ps2-keyboard-spinup (size=8)
Add romfile:  (size=1660504)
Add romfile: s3nv (size=32768)
Add romfile:  (size=31576)
Add romfile: bootblock (size=1088)
multiboot: eax=0, ebx=0
init ivt
init bda
init bios32
init PMM
init PNPBIOS table
init keyboard
init mouse
init pic
math cp init
PCI probe
Found 27 PCI devices (max PCI bus is 05)
Relocating coreboot bios tables
Copying SMBIOS entry point from 0xdfc5f000 to 0x000f6440
Copying ACPI RSDP from 0xdfc70000 to 0x000f6410
Copying MPTABLE from 0xdfc94000/dfc94010 to 0x000f6230
Copying PIR from 0xdfc95000 to 0x000f6200
Using pmtimer, ioport 0x808
init timer
Scan for VGA option rom
/dfc09000\ Start thread func=dfc0f9ed
|dfc09000| init usb
|dfc09000| EHCI init on dev 00:12.2 (regs=0xf7f04020)
/dfc08000\ Start thread func=dfc0f07e
init ps2port
/dfc07000\ Start thread func=dfc0e567
|dfc07000| WARNING - Timeout at i8042_flush:71!
\dfc07000/ End thread
|dfc09000| EHCI init on dev 00:13.2 (regs=0xf7f05020)
/dfc07000\ Start thread func=dfc0f07e
/dfc05000\ Start thread func=dfc135f1
init lpt
Found 1 lpt ports
init serial
Found 2 serial ports
init floppy drives
init hard drives
init ahci
ebda moved from 9f000 to 9e800
AHCI controller at 11.0, iobase f7f03000, irq 11
AHCI: cap 0xf332ff05, ports_impl 0x3f
/dfc04000\ Start thread func=dfc11e79
|dfc04000| AHCI/0: probing
|dfc04000| AHCI/0: link up
|dfc09000| EHCI init on dev 00:16.2 (regs=0xf7f06020)
/dfc03000\ Start thread func=dfc0f07e
/dfc02000\ Start thread func=dfc135f1
/dfc01000\ Start thread func=dfc135f1
/dfbff000\ Start thread func=dfc11e79
|dfbff000| AHCI/1: probing
|dfbff000| AHCI/1: link up
|dfc04000| AHCI/0: ... finished, status 0x51, ERROR 0x4
|dfc09000| OHCI init on dev 00:12.0 (regs=0xf7f00000)
/dfbfe000\ Start thread func=dfc0f784
/dfbfd000\ Start thread func=dfc135f1
/dfbfc000\ Start thread func=dfc135f1
/dfbfb000\ Start thread func=dfc135f1
/dfbfa000\ Start thread func=dfc11e79
|dfbfa000| AHCI/2: probing
|dfc04000| Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
|dfc09000| OHCI init on dev 00:13.0 (regs=0xf7f01000)
/dfbf9000\ Start thread func=dfc0f784
/dfbf8000\ Start thread func=dfc135f1
/dfbf7000\ Start thread func=dfc135f1
/dfbf6000\ Start thread func=dfc135f1
\dfbf6000/ End thread
\dfbfb000/ End thread
\dfc01000/ End thread
\dfc05000/ End thread
/dfc01000\ Start thread func=dfc11e79
|dfc01000| AHCI/3: probing
|dfbfa000| AHCI/2: link down
|dfbff000| AHCI/1: ... finished, status 0x51, ERROR 0x4
|dfc04000| AHCI/0: registering: "AHCI/0: SB mSATA SSD ATA-10 Hard-Disk (14318 MiBytes)"
|dfc04000| Registering bootable: AHCI/0: SB mSATA SSD ATA-10 Hard-Disk (14318 MiBytes) (type:2 prio:103 data:f6190)
\dfc04000/ End thread
|dfc09000| OHCI init on dev 00:16.0 (regs=0xf7f02000)
/dfc04000\ Start thread func=dfc0f784
/dfbfb000\ Start thread func=dfc135f1
/dfbf6000\ Start thread func=dfc135f1
\dfbf6000/ End thread
\dfbf7000/ End thread
\dfbfc000/ End thread
\dfc02000/ End thread
/dfc02000\ Start thread func=dfc135f1
/dfbfc000\ Start thread func=dfc11e79
|dfbfc000| AHCI/4: probing
|dfc01000| AHCI/3: link down
\dfbfa000/ End thread
|dfbff000| Searching bootorder for: /pci@i0cf8/*@11/drive@1/disk@0
\dfc09000/ End thread
/dfbfa000\ Start thread func=dfc135f1
/dfbf7000\ Start thread func=dfc135f1
/dfbf6000\ Start thread func=dfc135f1
\dfbf6000/ End thread
\dfbfb000/ End thread
\dfbf8000/ End thread
|dfbfd000| set_address 0xdfc067b0
/dfbfb000\ Start thread func=dfc135f1
\dfbfb000/ End thread
/dfbfb000\ Start thread func=dfc11e79
|dfbfb000| AHCI/5: probing
|dfbfc000| AHCI/4: link down
\dfc01000/ End thread
|dfbff000| AHCI/1: registering: "AHCI/1: Corsair CSSD-F40GB2-A ATA-8 Hard-Disk (38164 MiBytes)"
|dfbff000| Registering bootable: AHCI/1: Corsair CSSD-F40GB2-A ATA-8 Hard-Disk (38164 MiBytes) (type:2 prio:103 data:f6140)
\dfbff000/ End thread
/dfc01000\ Start thread func=dfc135f1
/dfbff000\ Start thread func=dfc135f1
init megasas
|dfbfb000| AHCI/5: link down
\dfbfc000/ End thread
/dfc05000\ Start thread func=dfc135f1
/dfbfc000\ Start thread func=dfc135f1
/dfbf8000\ Start thread func=dfc135f1
|dfc02000| set_address 0xdfc0a200
\dfbfb000/ End thread
/dfbfb000\ Start thread func=dfc135f1
/dfbf6000\ Start thread func=dfc135f1
/dfbf5000\ Start thread func=dfc135f1
|dfbfd000| config_usb: 0xdfc095d0
\dfc07000/ End thread
/dfc07000\ Start thread func=dfc135f1
/dfbf4000\ Start thread func=dfc135f1
\dfbf4000/ End thread
\dfbf6000/ End thread
\dfbfc000/ End thread
\dfc01000/ End thread
\dfbfa000/ End thread
/dfc01000\ Start thread func=dfc135f1
\dfc01000/ End thread
\dfbf5000/ End thread
\dfbf8000/ End thread
\dfbff000/ End thread
\dfbf7000/ End thread
|dfbfd000| device rev=0201 cls=00 sub=00 proto=00 size=64
/dfc01000\ Start thread func=dfc135f1
|dfc02000| config_usb: 0xdfc0a0d0
\dfbf9000/ End thread
\dfbfe000/ End thread
|dfc02000| device rev=0210 cls=00 sub=00 proto=00 size=64
|dfc02000| Searching bootorder for: /pci@i0cf8/usb@12,2/storage@5/*@0/*@0,0
|dfc02000| Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@5
|dfbfd000| Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
|dfbfd000| Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
\dfc01000/ End thread
\dfc07000/ End thread
\dfbfb000/ End thread
\dfc05000/ End thread
|dfc02000| USB MSC vendor='WD' product='Elements 10B8' rev='1012' type=0 removable=0
\dfc04000/ End thread
|dfbfd000| USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0 removable=1
Wcall16 with invalid stack: eax=dfc02e66 edx=0 func=0x000f91f0 esp=dfc02e54 ret=0x000f0604