On Sun, Jul 23, 2017 at 01:11:49AM +0300, Aleksandr Bezzubikov wrote:

> On PCI init PCI bridge devices may need some
> extra info about bus number to reserve, IO, memory and
> prefetchable memory limits. QEMU can provide this
> with special vendor-specific PCI capability.
>
> This capability is intended to be used only
> for Red Hat PCI bridges, i.e. QEMU cooperation.
>
> Sizes of limits match ones from
> PCI Type 1 Configuration Space Header,
> number of buses to reserve occupies only 1 byte
> since it is the size of Subordinate Bus Number register.
>
> Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
> ---
>  src/hw/pci_cap.h | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 src/hw/pci_cap.h
>
> diff --git a/src/hw/pci_cap.h b/src/hw/pci_cap.h
> new file mode 100644
> index 0000000..1382b0b
> --- /dev/null
> +++ b/src/hw/pci_cap.h
> @@ -0,0 +1,23 @@
> +#ifndef _PCI_CAP_H
> +#define _PCI_CAP_H
> +
> +#include "types.h"
> +
> +struct vendor_pci_cap {
> +    u8 id;
> +    u8 next;
> +    u8 len;
> +};

Thanks. 

If you respin this series, please add this header to the
src/fw/ directory instead of src/hw/.  Also, I'd prefer to avoid a
"pci_" prefix on the header as it makes it seem similar to the
existing pci_regs.h and pci_ids.h headers which are a bit different -
how about src/fw/dev-pci.h instead?

-Kevin