Hi, 

The idea is to run some security and packet inspection codes on the hidden core.
There is a typo on the title, it should be 'Running privilege code on hidden core'.

Thanks, 


On Thu, Jun 6, 2013 at 3:04 PM, Fred . <eldmannen@gmail.com> wrote:
I am curious as to why you would want to do such a thing...


On Thu, Jun 6, 2013 at 6:52 PM, Jerry Backer <bataille16@gmail.com> wrote:
Hello, 

I am using seaBIOS with QEMU and am attempting to hide a processor core (on an smp system) from the O.S. and then load a dedicated code on that core before boot. I have managed to hide one of the cores by decreasing CountCPUs (within smp.c) after running the ap core code, hence the BIOS load info for 1 less core on the mp table. 

However, I have not been able to figure out how to load the privileged code. My intuition was to load it when the hidden core enters protected mode before running kernel code. But I don't see where in the code the cores go into protected mode during boot. 

Can anyone give me some insight on how to proceed?

Thanks, 

--
Jerry 

_______________________________________________
SeaBIOS mailing list
SeaBIOS@seabios.org
http://www.seabios.org/mailman/listinfo/seabios





--
Jerry Backer