SeaBIOS (version rel-1.16.2-12-g96a8d130)
BUILD: gcc: (SUSE Linux) 13.3.0 binutils: (GNU Binutils; openSUSE Tumbleweed) 2.42.0.20240130-4
No Xen hypervisor found.
Running on QEMU (i440fx)
physbits: signature="GenuineIntel", pae=yes, lm=yes, phys-bits=42, valid=yes
cpuid 0x40000000: eax 40000001, signature 'KVMKVMKVM'
Running on KVM
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
qemu/e820: addr 0x0000000000000000 len 0x00000000c0000000 [RAM]
qemu/e820: addr 0x0000000100000000 len 0x0000000140000000 [RAM]
Relocating init from 0x000d4240 to 0xbefeb260 (size 85248)
Moving pm_base to 0x600
kvmclock: at 0xe8660 (msr 0x4b564d01)
kvmclock: stable tsc, 2100 MHz
CPU Mhz=2100 (kvmclock)
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
=== PCI device probing ===
Found 7 PCI devices (max PCI bus is 00)
=== PCI new allocation pass #1 ===
PCI: check devices
=== PCI new allocation pass #2 ===
PCI: IO: c000 - c04f
PCI: 32: 00000000c0000000 - 00000000fec00000
PCI: 64: 0000038000000000 - 0000038040000000
PCI: map device bdf=00:04.0  bar 0, addr 38000000000, size 00004000 [mem]
PCI: map device bdf=00:03.0  bar 1, addr 0000c000, size 00000040 [io]
PCI: map device bdf=00:01.1  bar 4, addr 0000c040, size 00000010 [io]
PCI: map device bdf=00:03.0  bar 6, addr feb80000, size 00040000 [mem]
PCI: map device bdf=00:03.0  bar 0, addr febc0000, size 00020000 [mem]
PCI: map device bdf=00:02.0  bar 6, addr febe0000, size 00010000 [mem]
PCI: map device bdf=00:02.0  bar 2, addr febf0000, size 00001000 [mem]
PCI: map device bdf=00:02.0  bar 0, addr fd000000, size 01000000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.3 id=8086:7113
PCI: init bdf=00:02.0 id=1234:1111
PCI: init bdf=00:03.0 id=8086:100e
PCI: init bdf=00:04.0 id=1b36:0010
PCI: Using 00:02.0 for primary VGA
Found 1 cpu(s) max supported 1 cpu(s)
Copying PIR from 0xbefffc40 to 0x000f5560
Copying MPTABLE from 0x00006cfc/befe2170 to 0x000f5470
Copying SMBIOS from 0x00006cfc to 0x000f52a0
table(50434146)=0xbffe1afa (via rsdt)
ACPI: parse DSDT at 0xbffe0040 (len 6842)
Scan for VGA option rom
Running option rom at c000:0003
Start SeaVGABIOS (version rel-1.16.2-3-gd478f380-prebuilt.qemu.org)
VGABUILD: gcc: (SUSE Linux) 13.3.0 binutils: (GNU Binutils; openSUSE Tumbleweed) 2.42.0.20240130-4
enter vga_post:
   a=00000010  b=0000ffff  c=00000000  d=0000ffff ds=0000 es=f000 ss=0000
  si=00000000 di=000060c0 bp=00000000 sp=00006d16 cs=f000 ip=d012  f=0000
VBE DISPI: bdf 00:02.0, bar 0
VBE DISPI: lfb_addr=fd000000, size 16 MB
Removing mode 19a
Removing mode 19b
Removing mode 19c
Removing mode 19d
Removing mode 19e
Attempting to allocate 512 bytes lowmem via pmm call to f000:d0c3
pmm call arg1=0
VGA stack allocated at e8460
Turning on vga text mode console
set VGA mode 3
SeaBIOS (version rel-1.16.2-12-g96a8d130)
Searching bootorder for: /pci@i0cf8/isa@1/fdc@03f0/floppy@0
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
Searching bootorder for: HALT
Can not map memory bar over 4Gig
Found 1 lpt ports
Found 1 serial ports
PS2 keyboard initialized
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
Device reports MEDIUM NOT PRESENT - 2 tries left
Device reports MEDIUM NOT PRESENT - 1 tries left
Device reports MEDIUM NOT PRESENT - 0 tries left
All threads complete.
Scan for option roms
Running option rom at ca00:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@3
Searching bootorder for: /rom@genroms/kvmvapic.bin
Searching bootorder for: HALT
Running option rom at cb00:0003
Space available for UMB: cd800-e7800, f4de0-f51a0
Returned 16646144 bytes of ZoneHigh
e820 map has 8 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000bffe0000 = 1 RAM
  4: 00000000bffe0000 - 00000000c0000000 = 2 RESERVED
  5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
  6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
  7: 0000000100000000 - 0000000240000000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Boot failed: could not read the boot disk

enter handle_18:
  NULL
Booting from Floppy...
floppy error: 40 00 00 00 00 01 02
Boot failed: could not read the boot disk

enter handle_18:
  NULL
Booting from DVD/CD...
Device reports MEDIUM NOT PRESENT - 2 tries left
Device reports MEDIUM NOT PRESENT - 1 tries left
Device reports MEDIUM NOT PRESENT - 0 tries left
Boot failed: Could not read from CDROM (code 0003)
enter handle_18:
  NULL
Booting from ROM...
Booting from ca00:0385
enter handle_18:
  NULL
No bootable device.