Two disks are configured and attached to on scsi controller, but only on disk can be detected by seabios.
</disk>
<disk type='block' device='disk'>
<driver name='qemu' type='raw' cache='none' io='native'/>
<source dev='/dev/disk/by-path/ip-192.168.13.7:3260-iscsi-iqn.2010-10.org.openstack:volume-7b894c9d-fe25-4ee4-96fa-2b5947f7758f-lun-0'/>
<target dev='sda' bus='scsi'/>
<serial>7b894c9d-fe25-4ee4-96fa-2b5947f7758f</serial>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='block' device='disk'>
<driver name='qemu' type='raw' cache='none' io='native'/>
<source dev='/dev/disk/by-path/ip-192.168.13.7:3260-iscsi-iqn.2010-10.org.openstack:volume-6d75e7b8-39b2-4209-9fe9-b2de953a7e01-lun-0'/>
<target dev='sdb' bus='scsi'/>
<serial>6d75e7b8-39b2-4209-9fe9-b2de953a7e01</serial>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'/>
<controller type='scsi' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</controller>
Could you help check it?