Author: wmb Date: Thu Jul 22 09:02:07 2010 New Revision: 1896 URL: http://tracker.coreboot.org/trac/openfirmware/changeset/1896
Log: ARM MMP2 - can now boot Linux.
Added: cpu/arm/mmp2/build/Linux-debug.txt Modified: cpu/arm/boot.fth cpu/arm/mmp2/addrs.fth cpu/arm/mmp2/boot.fth cpu/arm/mmp2/build/Makefile cpu/arm/mmp2/devices.fth cpu/arm/mmp2/fw.bth cpu/arm/mmp2/mmuon.fth cpu/arm/scc.fth cpu/arm/target.fth
Modified: cpu/arm/boot.fth ============================================================================== --- cpu/arm/boot.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/boot.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -54,14 +54,9 @@ str r1,'user dp \ set here
str r8,'user memtop - sub sp,r8,#0x40 + sub sp,r8,#0x40 \ Guard band \ Now the stacks are just below the end of our memory
- ps-size-t rs-size-t + # - sub r8,r8,* - sub r8,r8,r12 - str r8,'user limit - str r7,'user syscall-vec str r10,'user #args str r11,'user args @@ -77,7 +72,16 @@ dec sp,* dec sp,#0x20 str sp,'user sp0 + + mov r8,sp + + ps-size-t # + dec r8,* + sub r8,r8,r12 \ Heap size + str r8,'user limit \ Initial heap will be from limit to bottom of stack + inc sp,1cell \ account for the top of stack register + adr ip,'body cold c;
Modified: cpu/arm/mmp2/addrs.fth ============================================================================== --- cpu/arm/mmp2/addrs.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/mmp2/addrs.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -2,7 +2,7 @@ h# 2000.0000 constant total-ram-size
h# 1fc0.0000 constant fb-pa -h# 40.0000 constant fb-size +h# 20.0000 constant fb-size \ The screen use a little more than 1 MiB at 800x480x24
fb-pa constant available-ram-size
@@ -11,7 +11,7 @@ ' (memory?) to memory?
\ OFW implementation choices -h# 0040.0000 constant fw-pa +h# 1fe0.0000 constant fw-pa
[ifdef] virtual-mode h# f700.0000 constant fw-virt-base @@ -21,17 +21,13 @@ 0 value fw-virt-size [then]
-h# 0010.0000 constant /fw-ram +h# 0020.0000 constant /fw-ram
h# 0110.0000 constant def-load-base
\ The heap starts at RAMtop, which on this system is "fw-pa /fw-ram +"
-\ We leave some memory in the /memory available list above the heap -\ for DMA allocation by the sound and USB driver. OFW's normal memory -\ usage thus fits in one 4M page-directory mapping region. - -h# 18.0000 constant heap-size +h# 10.0000 constant heap-size heap-size constant initial-heap-size
h# 4000 constant page-table-pa
Modified: cpu/arm/mmp2/boot.fth ============================================================================== --- cpu/arm/mmp2/boot.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/mmp2/boot.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -8,15 +8,19 @@ \ Put the arguments in safe registers sub r6,lr,#0x8c \ r6 points to header (lr set by code at origin) mov r7,#0 \ r7: functions - add r8,r6,0x200000 \ r8: memtop - 2MiB above load address + add r8,r6,`/fw-ram` \ r8: memtop - 2MiB above load address \ r9 is up mov r10,#0 \ r10: argc mov r11,r2 \ r11: argv (kernel args) mov r12,`initial-heap-size` \ r12: initial-heap-size - mov r3,#0 + + \ Debug - snapshot some register values + mov r3,#0x100 str r0,[r3],#4 str r1,[r3],#4 str r2,[r3],#4 + str r8,[r3],#4 + str r6,[r3],#4
b 'code start-forth \ Branch to the generic startup code end-code
Added: cpu/arm/mmp2/build/Linux-debug.txt ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ cpu/arm/mmp2/build/Linux-debug.txt Thu Jul 22 09:02:07 2010 (r1896) @@ -0,0 +1,32 @@ +\ This is a recipe for using OFW to debug into the Linux kernel +\ startup. You can cut/paste groups into the serial window + +fatload mmc 1:1 0x1f800000 ofw.rom ; boot 0x1f800000 +fatload mmc 1:1 0x1fe00000 ofw.rom ; boot 0x1fe00000 + +dev /memory 1f800000 400000 0 claim +load ext:\zimage + +1100134 till \ After uncompress +--bp + +208064 till \ About to turn on MMU +--bp + +text-off ofw-sections \ Put OFW in pdir +vector-base f.0000 80 move \ Clone vector table to xxxf.0000 +c0e page-table@ fff la+ l! \ Alias vector table at ffff.0000 +step \ Turn on MMU, high vector loc + +c0009fb0 till \ paging_init +--bp + +e35e041f c000b6e8 instruction! \ Stop clearing PDIR at Forth loc - Changes MODULES_VADDR +c000b6f0 till \ Just before second pmd_clear loop +--bp +2000.0000 to r14 \ Bump addr to skip OFW mapping + +e35104d4 c000b76c instruction! \ Change VMALLOC_END to device physical base to preserve device access + +\ Now can set breakpoints at other places +c0010130 till \ memzero
Modified: cpu/arm/mmp2/build/Makefile ============================================================================== --- cpu/arm/mmp2/build/Makefile Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/mmp2/build/Makefile Thu Jul 22 09:02:07 2010 (r1896) @@ -5,14 +5,14 @@ CLIENTDIR=../../../../clients CLIENTPROGS=
-all: mmp2.rom tags +all: ofw.rom tags
-mmp2.tag: mmp2.rom +ofw.tag: ofw.rom
-tags: mmp2.tag +tags: ofw.tag @${BASEDIR}/forth/lib/toctags ${BASEDIR} ${TAGFILES}
-mmp2.rom: FORCE build ${CLIENTPROGS} +ofw.rom: FORCE build ${CLIENTPROGS} ./build $@
../../${OS}/forth:
Modified: cpu/arm/mmp2/devices.fth ============================================================================== --- cpu/arm/mmp2/devices.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/mmp2/devices.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -62,7 +62,7 @@ ' com1 is fallback-device
0 0 " d420b000" " /" begin-package - " screen" name + " display" name fload ${BP}/cpu/arm/mmp2/lcdcfg.fth fload ${BP}/cpu/arm/mmp2/dsi.fth
@@ -94,7 +94,7 @@ ' display-remove is-remove ' display-selftest is-selftest end-package -devalias screen /screen +devalias screen /display
devalias keyboard /keyboard
Modified: cpu/arm/mmp2/fw.bth ============================================================================== --- cpu/arm/mmp2/fw.bth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/mmp2/fw.bth Thu Jul 22 09:02:07 2010 (r1896) @@ -152,7 +152,8 @@ [ifdef] virtual-mode : (initial-heap) ( -- adr len ) sp0 @ ps-size - dict-limit tuck - ; [else] -: (initial-heap) ( -- adr len ) RAMtop heap-size ; + \ : (initial-heap) ( -- adr len ) RAMtop heap-size ; +: (initial-heap) ( -- adr len ) limit heap-size ; [then] ' (initial-heap) is initial-heap headers @@ -188,6 +189,7 @@ devalias nfs net//obp-tftp:last//nfs
fload ${BP}/cpu/arm/linux.fth +h# 20.0000 to linux-params \ The Jasper Linux kernel fails unless the params are between 0x20.0000 and 0x20.4000 d# 2382 to arm-linux-machine-type \ Marvell Jasper
\ Add a tag describing the linear frame buffer
Modified: cpu/arm/mmp2/mmuon.fth ============================================================================== --- cpu/arm/mmp2/mmuon.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/mmp2/mmuon.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -11,7 +11,7 @@
: map-section ( pa+mode va -- ) - d# 18 rshift page-table@ + l! + d# 18 rshift page-table@ + tuck l! clean-d$-entry ; : map-sections ( pa mode va size -- ) 2>r + 2 or 2r> ( pa+mode va size ) @@ -22,13 +22,18 @@ drop ;
+: ofw-sections ( -- ) + h# 0000.0000 h# c0e over fb-pa map-sections \ Cache and write bufferable + fw-pa h# c0e over /fw-ram map-sections \ Cache and write bufferable + fb-pa h# c06 over fb-size map-sections \ Write bufferable + h# d400.0000 h# c02 over h# 0040.0000 map-sections \ I/O - no caching or buffering +; + : setup-sections page-table-pa page-table! page-table-pa /page-table erase
- h# 0000.0000 h# c0e 0 fb-pa map-sections \ Cache and write bufferable - fb-pa h# c06 fb-pa fb-size map-sections \ Write bufferable - h# d400.0000 h# c02 h# d400.0000 h# 0100.0000 map-sections \ I/O - no caching or buffering + ofw-sections ; \ Do we need to map SRAM and DDRC ?
Modified: cpu/arm/scc.fth ============================================================================== --- cpu/arm/scc.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/scc.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -3,27 +3,84 @@
hex code scc-id@ ( -- n ) psh tos,sp mrc p15,0,tos,cr0,cr0,0 c; +code cache-type@ ( -- n ) psh tos,sp mrc p15,0,tos,cr0,cr0,1 c; +code tlb-type@ ( -- n ) psh tos,sp mrc p15,0,tos,cr0,cr0,3 c; code control@ ( -- n ) psh tos,sp mrc p15,0,tos,cr1,cr0,0 c; code ttbase@ ( -- n ) psh tos,sp mrc p15,0,tos,cr2,cr0,0 c; +code ttbase0@ ( -- n ) psh tos,sp mrc p15,0,tos,cr2,cr0,0 c; +code ttbase1@ ( -- n ) psh tos,sp mrc p15,0,tos,cr2,cr1,0 c; +code ttcontrol@ ( -- n ) psh tos,sp mrc p15,0,tos,cr2,cr2,0 c; code domain-access@ ( -- n ) psh tos,sp mrc p15,0,tos,cr3,cr0,0 c; code fault-status@ ( -- n ) psh tos,sp mrc p15,0,tos,cr5,cr0,0 c; +code i-fault-status@ ( -- n ) psh tos,sp mrc p15,0,tos,cr5,cr1,0 c; code fault-address@ ( -- n ) psh tos,sp mrc p15,0,tos,cr6,cr0,0 c; +code wp-fault-address@ ( -- n ) psh tos,sp mrc p15,0,tos,cr6,cr1,0 c; +code i-fault-address@ ( -- n ) psh tos,sp mrc p15,0,tos,cr6,cr2,0 c;
code control! ( n -- ) mcr p15,0,tos,cr1,cr0,0 pop tos,sp c; code ttbase! ( n -- ) mcr p15,0,tos,cr2,cr0,0 pop tos,sp c; +code ttbase0! ( n -- ) mcr p15,0,tos,cr2,cr0,0 pop tos,sp c; +code ttbase1! ( n -- ) mcr p15,0,tos,cr2,cr1,0 pop tos,sp c; +code ttcontrol! ( n -- ) mcr p15,0,tos,cr2,cr2,0 pop tos,sp c; code domain-access! ( n -- ) mcr p15,0,tos,cr3,cr0,0 pop tos,sp c; code fault-status! ( n -- ) mcr p15,0,tos,cr5,cr0,0 pop tos,sp c; +code i-fault-status! ( n -- ) mcr p15,0,tos,cr5,cr1,0 pop tos,sp c; code fault-address! ( n -- ) mcr p15,0,tos,cr6,cr0,0 pop tos,sp c; -code flush-i&d$ ( -- ) mcr p15,0,r0,cr7,cr7,0 c; +code wp-fault-address! ( n -- ) mcr p15,0,tos,cr6,cr1,0 pop tos,sp c; +code i-fault-address! ( n -- ) mcr p15,0,tos,cr6,cr2,0 pop tos,sp c; + +code c7-wfi ( -- ) mcr p15,0,r0,cr7,cr0,4 c; + code flush-i$ ( -- ) mcr p15,0,r0,cr7,cr5,0 c; +code flush-i$-entry ( va -- ) mcr p15,0,tos,cr7,cr5,1 pop tos,sp c; +code flush-i$-entry-way ( sw -- ) mcr p15,0,tos,cr7,cr5,2 pop tos,sp c; +code flush-prefetch ( -- ) mcr p15,0,r0,cr7,cr5,4 c; +code flush-bt$ ( -- ) mcr p15,0,r0,cr7,cr5,6 c; +code flush-bt$-entry ( va -- ) mcr p15,0,tos,cr7,cr5,7 pop tos,sp c; + code flush-d$ ( -- ) mcr p15,0,r0,cr7,cr6,0 c; -code flush-d$-entry ( va -- ) mcr p15,0,tos,cr7,cr6,1 pop tos,sp c; +code flush-d$-entry ( va -- ) mcr p15,0,tos,cr7,cr6,1 pop tos,sp c; +code flush-d$-entry-way ( sw -- ) mcr p15,0,tos,cr7,cr6,2 pop tos,sp c; + +code flush-i&d$ ( -- ) mcr p15,0,r0,cr7,cr7,0 c; +code flush-u$ ( -- ) mcr p15,0,r0,cr7,cr7,0 c; +code flush-u$-entry ( va -- ) mcr p15,0,tos,cr7,cr7,1 pop tos,sp c; +code flush-u$-way ( sw -- ) mcr p15,0,tos,cr7,cr7,2 pop tos,sp c; + +code clean-d$ ( -- ) mcr p15,0,r0,cr7,cr10,0 c; code clean-d$-entry ( va -- ) mcr p15,0,tos,cr7,cr10,1 pop tos,sp c; +code clean-d$-way ( sw -- ) mcr p15,0,tos,cr7,cr10,2 pop tos,sp c; +code test&clean-d$ ( -- ) mcr p15,0,r0,cr7,cr10,3 c; + +code clean-u$ ( -- ) mcr p15,0,r0,cr7,cr11,0 c; +code clean-u$-entry ( va -- ) mcr p15,0,tos,cr7,cr11,1 pop tos,sp c; +code clean-u$-way ( sw -- ) mcr p15,0,tos,cr7,cr11,2 pop tos,sp c; + +code clean&flush-d$ ( -- ) mcr p15,0,r0,cr7,cr14,0 c; +code clean&flush-d$-entry ( va -- ) mcr p15,0,tos,cr7,cr14,1 pop tos,sp c; +code clean&flush-d$-entry-way ( sw -- ) mcr p15,0,tos,cr7,cr14,2 pop tos,sp c; +code test,clean&flush-d$ ( -- ) mcr p15,0,tos,cr7,cr14,3 c; + +code clean&flush-u$ ( -- ) mcr p15,0,r0,cr7,cr15,0 c; +code clean&flush-u$-entry ( va -- ) mcr p15,0,tos,cr7,cr15,1 pop tos,sp c; +code clean&flush-u$-entry-way ( sw -- ) mcr p15,0,tos,cr7,cr15,2 pop tos,sp c; + + + code drain-write-buffer ( -- ) mcr p15,0,r0,cr7,cr10,4 c; +alias data-sync-barrier drain-write-buffer +code drain-write-buffer ( -- ) mcr p15,0,r0,cr7,cr10,4 c; +code data-memory-barrier ( -- ) mcr p15,0,r0,cr7,cr10,5 c; + code flush-i&d-tlb ( -- ) mcr p15,0,r0,cr8,cr7,0 c; +code flush-i&d-tlb-entry ( va -- ) mcr p15,0,tos,cr8,cr7,1 pop tos,sp c; +code flush-i&d-tlb-asid ( as -- ) mcr p15,0,tos,cr8,cr7,2 pop tos,sp c; code flush-i-tlb ( -- ) mcr p15,0,r0,cr8,cr5,0 c; +code flush-i-tlb-entry ( va -- ) mcr p15,0,tos,cr8,cr5,1 pop tos,sp c; +code flush-i-tlb-asid ( as -- ) mcr p15,0,tos,cr8,cr5,2 pop tos,sp c; code flush-d-tlb ( -- ) mcr p15,0,r0,cr8,cr6,0 c; code flush-d-tlb-entry ( va -- ) mcr p15,0,tos,cr8,cr6,1 pop tos,sp c; +code flush-d-tlb-asid ( as -- ) mcr p15,0,tos,cr8,cr6,1 pop tos,sp c;
code enable-odd-lfsr ( -- ) mcr p15,0,r0,cr15,cr1,1 c; code enable-even-lfsr ( -- ) mcr p15,0,r0,cr15,cr2,1 c; @@ -53,6 +110,23 @@ /cache-line +loop ;
+code turn-off-dcache ( adr len -- ) + pop r0,sp \ tos:len r0:adr + cmp tos,#0 + <> if + begin + mcr p15,0,r0,cr7,cr10,1 \ Clean D$ entry + mcr p15,0,r0,cr7,cr6,1 \ Flush D$ entry + add r0,r0,#32 \ Advance to next line + decs tos,#32 \ Assume cache line size of 32 bytes + 0= until + then + mcr p15,0,r0,cr7,cr10,4 \ Drain write buffer + mrc p15,0,r0,cr1,cr0,0 \ Read control register + bic r0,r0,#4 \ Clear DCache enable bit + mcr p15,0,r0,cr1,cr0,0 \ Write control register +c; + \ System-dependent function to flush the entire cache \ (In normal ARM nomenclature, as used by most of the words in this file, \ "flush" means "invalidate without ensuring that cached data has been
Modified: cpu/arm/target.fth ============================================================================== --- cpu/arm/target.fth Thu Jul 22 08:54:57 2010 (r1895) +++ cpu/arm/target.fth Thu Jul 22 09:02:07 2010 (r1896) @@ -36,9 +36,9 @@ /l-t constant /token-t /l-t constant /link-t /token-t constant /defer-t -/n-t 800 * constant user-size-t -/n-t 100 * constant ps-size-t -/n-t 100 * constant rs-size-t +/n-t th c00 * constant user-size-t +/n-t th 200 * constant ps-size-t +/n-t th 200 * constant rs-size-t /l-t constant /user#-t
\ 32 bit host Forth compiling 32-bit target Forth
openfirmware@openfirmware.info
-
repository service