Author: laurent Date: 2009-01-13 17:42:29 +0100 (Tue, 13 Jan 2009) New Revision: 400
Modified: openbios-devel/arch/ppc/qemu/init.c openbios-devel/drivers/escc.c Log: ESCC: correctly use CONFIG_SERIAL_PORT
Modified: openbios-devel/arch/ppc/qemu/init.c =================================================================== --- openbios-devel/arch/ppc/qemu/init.c 2009-01-13 12:19:11 UTC (rev 399) +++ openbios-devel/arch/ppc/qemu/init.c 2009-01-13 16:42:29 UTC (rev 400) @@ -148,7 +148,8 @@
isa_io_base = arch->io_base;
- uart_init(0x80013000ULL, CONFIG_SERIAL_SPEED); + uart_init(0x80013000ULL + CONFIG_SERIAL_PORT * 0x20, + CONFIG_SERIAL_SPEED);
printk("\n"); printk("=============================================================\n");
Modified: openbios-devel/drivers/escc.c =================================================================== --- openbios-devel/drivers/escc.c 2009-01-13 12:19:11 UTC (rev 399) +++ openbios-devel/drivers/escc.c 2009-01-13 16:42:29 UTC (rev 400) @@ -117,8 +117,7 @@
void serial_putchar(int c) { - uart_putchar((int)(serial_dev + CONFIG_SERIAL_PORT), - (unsigned char) (c & 0xff)); + uart_putchar((int)serial_dev, (unsigned char) (c & 0xff)); }
void serial_cls(void)