Re: [OpenBIOS] FCode-utils 1.0.2 toke checksum issue

[Stefan Reinauer]

On 1/28/10 4:37 AM, Asif Haswarey wrote:
> Hi,
>
> We have run into an issue with our FCodes tokenized using FCode-utils 1.0.2 toke,
> on specific SPARC (Enterprise) platforms: M4000, M9000.
>
> Power-up device probe yields the following warning message on the console:
>
> WARNING: /pci@20,600000/...: FCode checksum error; expected: 280d result: 2837

Dear Asif,

could you please try the attached patch and see if the error goes away?

Best regards,

Stefan