Success: Flashrom r1060 on DFI LanParty JR X58 H3T6

[Daniel Flinkmann]

Hi,

There was a new BIOS version available for my DFI LP JR X58 H3T6 Mainboard available. 
As the last flash via Bus-Pirate worked fine, I tried it this time via the (running) mainboard 
on the fly. The results are following.

Please have a look at the erase section in the second log output:

Writing flash chip… Erasing flash before programming… Erasing flash chip… Looking at blockwise erase function 0… trying… 0×000000-0×000fff, ich_spi_send_multicommand: 
FIXME: Add on-the-fly reprogramming of the chipset opcode list.
Invalid OPCODE 0×20
spi_block_erase_20 failed during command execution at address 0×0
Looking at blockwise erase function 1… trying… 0×000000-0×007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.
Invalid  OPCODE 0×52
spi_block_erase_52 failed during command execution at address 0×0

Kind regards,

Daniel

# flashrom -V
flashrom v0.9.2-r1060 on Linux 2.6.35-5-server (x86_64), built with libpci 3.0.0, GCC 4.4.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1466M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10006 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System Manufact"
DMI string system-product-name: "System Product"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "DFI Inc."
DMI string baseboard-product-name: "DFI LP JR X58"
DMI string baseboard-version: "1.0"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, id 8718
Found chipset "Intel ICH10R", enabling flash write... chipset PCI ID is 8086:3a16, 
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3

Root Complex Register Block address = 0xfed1c000
GCS = 0x65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x0 (reserved)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00414004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES... 
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
No IT87* serial flash segment enabled.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F020, 256 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Hyundai HY29F002T, 256 KB: skipped.
Probing for Hyundai HY29F002B, 256 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Chip status register is 00
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000.
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x6b, id2 0xbc, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x8e
===
This flash part has status UNTESTED for operations: ERASE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [e-mail] if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
No operations were specified.

root@tower:~/flashrom-svn# flashrom -Vw JX58D615.BIN

flashrom v0.9.2-r1060 on Linux 2.6.35-5-server (x86_64), built with libpci 3.0.0, 
GCC 4.4.4, little endian

flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop… OS timer resolution is 1 usecs, 1318M loops per second, 10 myus = 9 us, 100 myus = 90 us, 1000 myus = 899 us, 10000 myus = 9083 us, 4 myus = 4 us, OK.

Initializing internal programmer

No coreboot table found.

DMI string system-manufacturer: “System Manufact”

DMI string system-product-name: “System Product”

DMI string system-version: “1.0”

DMI string baseboard-manufacturer: “DFI Inc.”

DMI string baseboard-product-name: “DFI LP JR X58”

DMI string baseboard-version: “1.0”

DMI string chassis-type: “Desktop”

Found 
ITE Super I/O, id 8718

Found chipset “Intel ICH10R”, enabling flash write… chipset 
PCI ID is 8086:3a16,

0xfff80000/0xffb80000 
FWH IDSEL: 0×0

0xfff00000/0xffb00000 
FWH IDSEL: 0×0

0xffe80000/0xffa80000 
FWH IDSEL: 0×1

0xffe00000/0xffa00000 
FWH IDSEL: 0×1

0xffd80000/0xff980000 
FWH IDSEL: 0×2

0xffd00000/0xff900000 
FWH IDSEL: 0×2

0xffc80000/0xff880000 
FWH IDSEL: 0×3

0xffc00000/0xff800000 
FWH IDSEL: 0×3

0xff700000/0xff300000 
FWH IDSEL: 0×4

0xff600000/0xff200000 
FWH IDSEL: 0×5

0xff500000/0xff100000 
FWH IDSEL: 0×6

0xff400000/0xff000000 
FWH IDSEL: 0×7

0xfff80000/0xffb80000 
FWH decode enabled

0xfff00000/0xffb00000 
FWH decode enabled

0xffe80000/0xffa80000 
FWH decode disabled

0xffe00000/0xffa00000 
FWH decode disabled

0xffd80000/0xff980000 
FWH decode disabled

0xffd00000/0xff900000 
FWH decode disabled

0xffc80000/0xff880000 
FWH decode disabled

0xffc00000/0xff800000 
FWH decode disabled

0xff700000/0xff300000 
FWH decode disabled

0xff600000/0xff200000 
FWH decode disabled

0xff500000/0xff100000 
FWH decode disabled

0xff400000/0xff000000 
FWH decode disabled

Maximum 
FWH chip size: 0×100000 bytes

BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0×3

Root Complex Register Block address = 0xfed1c000

GCS = 0×65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0×0 (reserved)

Top Swap : not enabled

SPIBAR = 0xfed1c000 + 0×3800

0×04: 0×2008 (
HSFS)

FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0

0×50: 0×00000202 (
FRAP)

BMWAG 0, BMRAG 0, BRWA 2, BRRA 2

0×54: 0×00001fff (FREG0)

0×58: 0×00001fff (FREG1)

0×5C: 0×00001fff (FREG2)

0×60: 0×00001fff (FREG3)

0×64: 0×00001fff (FREG4)

0×74: 0×00000000 (PR0)

0×78: 0×00000000 (PR1)

0×7C: 0×00000000 (PR2)

0×80: 0×00000000 (PR3)

0×84: 0×00000000 (PR4)

0×90: 0×00414004 (
SSFS, SSFC)

0×94: 0×5006     (
PREOP)

0×96: 0×463b     (
OPTYPE)

0×98: 0×05d80302 (
OPMENU)

0×9C: 0xc79f0190 (
OPMENU+4)

0xA0: 0×00000000 (
BBAR)

0xB0: 0×00000000 (
FDOC)

Programming 
OPCODES…

program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190

done

SPI Read Configuration: prefetching disabled, caching enabled, OK.

This chipset supports the following protocols: 
FWH,SPI.

No IT87* serial flash segment enabled.

Probing for 
AMD Am29F010A/B, 128 KB: skipped.

Probing for 
AMD Am29F002(N)BB, 256 KB: skipped.

Probing for 
AMD Am29F002(N)BT, 256 KB: skipped.

Probing for 
AMD Am29F016D, 2048 KB: skipped.

Probing for 
AMD Am29F040B, 512 KB: skipped.

Probing for 
AMD Am29F080B, 1024 KB: skipped.

Probing for 
AMD Am29LV040B, 512 KB: skipped.

Probing for 
AMD Am29LV081B, 1024 KB: skipped.

Probing for 
ASD AE49F2008, 256 KB: skipped.

Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT29C512, 64 KB: skipped.

Probing for Atmel AT29C010A, 128 KB: skipped.

Probing for Atmel AT29C020, 256 KB: skipped.

Probing for Atmel AT29C040A, 512 KB: skipped.

Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Atmel AT49BV512, 64 KB: skipped.

Probing for Atmel AT49F020, 256 KB: skipped.

Probing for Atmel 
AT49F002, 256 KB: skipped.

Probing for Atmel 
AT49F002T, 256 KB: skipped.

Probing for 
AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
AMIC A29002B, 256 KB: skipped.

Probing for 
AMIC A29002T, 256 KB: skipped.

Probing for 
AMIC A29040B, 512 KB: skipped.

Probing for 
AMIC A49LF040A, 512 KB: skipped.

Probing for 
EMST F49B002UA, 256 KB: skipped.

Probing for 
EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Eon EN29F010, 128 KB: skipped.

Probing for 
EON EN29F002(N)B, 256 KB: skipped.

Probing for 
EON EN29F002(N)T, 256 KB: skipped.

Probing for Fujitsu MBM29F004BC, 512 KB: skipped.

Probing for Fujitsu MBM29F004TC, 512 KB: skipped.

Probing for Fujitsu MBM29F400BC, 512 KB: skipped.

Probing for Fujitsu MBM29F400TC, 512 KB: skipped.

Probing for Hyundai HY29F002T, 256 KB: skipped.

Probing for Hyundai HY29F002B, 256 KB: skipped.

Probing for Intel 28F001BX-B, 128 KB: skipped.

Probing for Intel 28F001BX-T, 128 KB: skipped.

Probing for Intel 28F004S5, 512 KB: skipped.

Probing for Intel 28F004BV/BE-B, 512 KB: skipped.

Probing for Intel 28F004BV/BE-T, 512 KB: skipped.

Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.

Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.

Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix MX29F001B, 128 KB: skipped.

Probing for Macronix MX29F001T, 128 KB: skipped.

Probing for Macronix MX29F002B, 256 KB: skipped.

Probing for Macronix MX29F002T, 256 KB: skipped.

Probing for Macronix MX29LV040, 512 KB: skipped.

Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC Pm29F002T, 256 KB: skipped.

Probing for 
PMC Pm29F002B, 256 KB: skipped.

Probing for 
PMC Pm39LV010, 128 KB: skipped.

Probing for 
PMC Pm39LV020, 256 KB: skipped.

Probing for 
PMC Pm39LV040, 512 KB: skipped.

Probing for 
PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0×8e

Probing for 
SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab

Probing for 
SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0×8e

Probing for 
SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Chip status register is 00

Chip status register: Block Protect Write Disable (
BPL) is not set

Chip status register: Auto Address Increment Programming (
AAI) is not set

Chip status register: Bit 5 / Block Protect 3 (BP3) is not set

Chip status register: Bit 4 / Block Protect 2 (BP2) is not set

Chip status register: Bit 3 / Block Protect 1 (BP1) is not set

Chip status register: Bit 2 / Block Protect 0 (BP0) is not set

Chip status register: Write Enable Latch (
WEL) is not set

Chip status register: Write In Progress (
WIP/BUSY) is not set

Found chip “
SST SST25VF080B” (1024 KB, SPI) at physical address 0xfff00000.

Probing for 
SST SST28SF040A, 512 KB: skipped.

Probing for 
SST SST29EE010, 128 KB: skipped.

Probing for 
SST SST29LE010, 128 KB: skipped.

Probing for 
SST SST29EE020A, 256 KB: skipped.

Probing for 
SST SST29LE020, 256 KB: skipped.

Probing for 
SST SST39SF512, 64 KB: skipped.

Probing for 
SST SST39SF010A, 128 KB: skipped.

Probing for 
SST SST39SF020A, 256 KB: skipped.

Probing for 
SST SST39SF040, 512 KB: skipped.

Probing for 
SST SST39VF512, 64 KB: skipped.

Probing for 
SST SST39VF010, 128 KB: skipped.

Probing for 
SST SST39VF020, 256 KB: skipped.

Probing for 
SST SST39VF040, 512 KB: skipped.

Probing for 
SST SST39VF080, 1024 KB: skipped.

Probing for 
SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0×6b, id2 0xbc, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF004C, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for 
SST SST49LF020, 256 KB: skipped.

Probing for 
SST SST49LF020A, 256 KB: skipped.

Probing for 
SST SST49LF040, 512 KB: skipped.

Probing for 
SST SST49LF040B, 512 KB: skipped.

Probing for 
SST SST49LF080A, 1024 KB: skipped.

Probing for 
SST SST49LF160C, 2048 KB: skipped.

Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P05.RES, 64 KB: Ignoring 
RES in favour of RDID.

Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P10.RES, 128 KB: Ignoring 
RES in favour of RDID.

Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P40-old, 512 KB: Ignoring 
RES in favour of RDID.

Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST M29F002B, 256 KB: skipped.

Probing for ST M29F002T/NT, 256 KB: skipped.

Probing for ST M29F040B, 512 KB: skipped.

Probing for ST M29F400BT, 512 KB: skipped.

Probing for ST M29W010B, 128 KB: skipped.

Probing for ST M29W040B, 512 KB: skipped.

Probing for ST M29W512B, 64 KB: skipped.

Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for 
FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for ST M50LPW116, 2048 KB: skipped.

Probing for SyncMOS S29C31004T, 512 KB: skipped.

Probing for SyncMOS S29C51001T, 128 KB: skipped.

Probing for SyncMOS S29C51002T, 256 KB: skipped.

Probing for SyncMOS S29C51004T, 512 KB: skipped.

Probing for TI TMS29F002RB, 256 KB: skipped.

Probing for TI TMS29F002RT, 256 KB: skipped.

Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W25×64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Winbond W29C011, 128 KB: skipped.

Probing for Winbond W29C020C, 256 KB: skipped.

Probing for Winbond W29C040P, 512 KB: skipped.

Probing for Winbond W29EE011, 128 KB: skipped.

Probing for Winbond W39V040A, 512 KB: skipped.

Probing for Winbond W39V040B, 512 KB: skipped.

Probing for Winbond W39V040C, 512 KB: skipped.

Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Winbond W39V080A, 1024 KB: skipped.

Probing for Winbond W49F002U, 256 KB: skipped.

Probing for Winbond W49V002A, 256 KB: skipped.

Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content

Probing for Atmel unknown Atmel 
SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Macronix unknown Macronix 
SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for 
SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for ST unknown ST 
SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Sanyo unknown Sanyo 
SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Generic unknown 
SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e

Probing for Generic unknown 
SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0×8e

=
This flash part has status UNTESTED for operations: ERASE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [e-mail] if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
=

Flash image seems to be a legacy 
BIOS. Disabling checks.

Writing flash chip… Erasing flash before programming… Erasing flash chip… Looking at blockwise erase function 0… trying… 0×000000-0×000fff, ich_spi_send_multicommand: 
FIXME: Add on-the-fly reprogramming of the chipset opcode list.

Invalid 
OPCODE 0×20

spi_block_erase_20 failed during command execution at address 0×0

Looking at blockwise erase function 1… trying… 0×000000-0×007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.

Invalid 
OPCODE 0×52

spi_block_erase_52 failed during command execution at address 0×0

Looking at blockwise erase function 2… trying… 0×000000-0×00ffff, 0×010000-0×01ffff, 0×020000-0×02ffff, 0×030000-0×03ffff, 0×040000-0×04ffff, 0×050000-0×05ffff, 0×060000-0×06ffff, 0×070000-0×07ffff, 0×080000-0×08ffff, 0×090000-0×09ffff, 0×0a0000-0×0affff, 0×0b0000-0×0bffff, 0×0c0000-0×0cffff, 0×0d0000-0×0dffff, 0×0e0000-0×0effff, 0×0f0000-0×0fffff,

SUCCESS.

done.

COMPLETE.

Verifying flash… 
VERIFIED.

root@tower:~/flashrom-svn#

[Daniel Flinkmann]

Just want to pop up this Success-Story, as I never saw an answer that the mainboard 
was added to the list.

Erasing,flashing, verifying worked flawlessly onboard and via the SPI header externally via bus-pirate (even though it 
was pretty slow in comparison to the onboard flashing).

The mainboard, manuals and BIOS can be viewed/received at:
http://lp.lanparty.com.tw/portal/CM -> Series: Lanparty JR -> JR X58-T3H6

Kind regards,

Daniel

Am 25.06.2010 um 12:26 schrieb Daniel Flinkmann:
> Hi,
>
> There was a new BIOS version available for my DFI LP JR X58 H3T6 Mainboard available. 
> As the last flash via Bus-Pirate worked fine, I tried it this time via the (running) mainboard 
> on the fly. The results are following.
>
> Please have a look at the erase section in the second log output:
>
> Writing flash chip… Erasing flash before programming… Erasing flash chip… Looking at blockwise erase function 0… trying… 0×000000-0×000fff, ich_spi_send_multicommand: 
> FIXME: Add on-the-fly reprogramming of the chipset opcode list.
> Invalid OPCODE 0×20
> spi_block_erase_20 failed during command execution at address 0×0
> Looking at blockwise erase function 1… trying… 0×000000-0×007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.
> Invalid  OPCODE 0×52
> spi_block_erase_52 failed during command execution at address 0×0
>
> Kind regards,
>
> Daniel
>
> # flashrom -V
> flashrom v0.9.2-r1060 on Linux 2.6.35-5-server (x86_64), built with libpci 3.0.0, GCC 4.4.4, little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OS timer resolution is 1 usecs, 1466M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10006 us, 4 myus = 4 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "System Manufact"
> DMI string system-product-name: "System Product"
> DMI string system-version: "1.0"
> DMI string baseboard-manufacturer: "DFI Inc."
> DMI string baseboard-product-name: "DFI LP JR X58"
> DMI string baseboard-version: "1.0"
> DMI string chassis-type: "Desktop"
> Found ITE Super I/O, id 8718
> Found chipset "Intel ICH10R", enabling flash write... chipset PCI ID is 8086:3a16, 
> 0xfff80000/0xffb80000 FWH IDSEL: 0x0
> 0xfff00000/0xffb00000 FWH IDSEL: 0x0
> 0xffe80000/0xffa80000 FWH IDSEL: 0x1
> 0xffe00000/0xffa00000 FWH IDSEL: 0x1
> 0xffd80000/0xff980000 FWH IDSEL: 0x2
> 0xffd00000/0xff900000 FWH IDSEL: 0x2
> 0xffc80000/0xff880000 FWH IDSEL: 0x3
> 0xffc00000/0xff800000 FWH IDSEL: 0x3
> 0xff700000/0xff300000 FWH IDSEL: 0x4
> 0xff600000/0xff200000 FWH IDSEL: 0x5
> 0xff500000/0xff100000 FWH IDSEL: 0x6
> 0xff400000/0xff000000 FWH IDSEL: 0x7
> 0xfff80000/0xffb80000 FWH decode enabled
> 0xfff00000/0xffb00000 FWH decode enabled
> 0xffe80000/0xffa80000 FWH decode disabled
> 0xffe00000/0xffa00000 FWH decode disabled
> 0xffd80000/0xff980000 FWH decode disabled
> 0xffd00000/0xff900000 FWH decode disabled
> 0xffc80000/0xff880000 FWH decode disabled
> 0xffc00000/0xff800000 FWH decode disabled
> 0xff700000/0xff300000 FWH decode disabled
> 0xff600000/0xff200000 FWH decode disabled
> 0xff500000/0xff100000 FWH decode disabled
> 0xff400000/0xff000000 FWH decode disabled
> Maximum FWH chip size: 0x100000 bytes
> BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3
>
> Root Complex Register Block address = 0xfed1c000
> GCS = 0x65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x0 (reserved)
> Top Swap : not enabled
> SPIBAR = 0xfed1c000 + 0x3800
> 0x04: 0x2008 (HSFS)
> FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
> 0x50: 0x00000202 (FRAP)
> BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
> 0x54: 0x00001fff (FREG0)
> 0x58: 0x00001fff (FREG1)
> 0x5C: 0x00001fff (FREG2)
> 0x60: 0x00001fff (FREG3)
> 0x64: 0x00001fff (FREG4)
> 0x74: 0x00000000 (PR0)
> 0x78: 0x00000000 (PR1)
> 0x7C: 0x00000000 (PR2)
> 0x80: 0x00000000 (PR3)
> 0x84: 0x00000000 (PR4)
> 0x90: 0x00414004 (SSFS, SSFC)
> 0x94: 0x5006     (PREOP)
> 0x96: 0x463b     (OPTYPE)
> 0x98: 0x05d80302 (OPMENU)
> 0x9C: 0xc79f0190 (OPMENU+4)
> 0xA0: 0x00000000 (BBAR)
> 0xB0: 0x00000000 (FDOC)
> Programming OPCODES... 
> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
> done
> SPI Read Configuration: prefetching disabled, caching enabled, OK.
> This chipset supports the following protocols: FWH,SPI.
> No IT87* serial flash segment enabled.
> Probing for AMD Am29F010A/B, 128 KB: skipped.
> Probing for AMD Am29F002(N)BB, 256 KB: skipped.
> Probing for AMD Am29F002(N)BT, 256 KB: skipped.
> Probing for AMD Am29F016D, 2048 KB: skipped.
> Probing for AMD Am29F040B, 512 KB: skipped.
> Probing for AMD Am29F080B, 1024 KB: skipped.
> Probing for AMD Am29LV040B, 512 KB: skipped.
> Probing for AMD Am29LV081B, 1024 KB: skipped.
> Probing for ASD AE49F2008, 256 KB: skipped.
> Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT29C512, 64 KB: skipped.
> Probing for Atmel AT29C010A, 128 KB: skipped.
> Probing for Atmel AT29C020, 256 KB: skipped.
> Probing for Atmel AT29C040A, 512 KB: skipped.
> Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT49BV512, 64 KB: skipped.
> Probing for Atmel AT49F020, 256 KB: skipped.
> Probing for Atmel AT49F002(N), 256 KB: skipped.
> Probing for Atmel AT49F002(N)T, 256 KB: skipped.
> Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for AMIC A29002B, 256 KB: skipped.
> Probing for AMIC A29002T, 256 KB: skipped.
> Probing for AMIC A29040B, 512 KB: skipped.
> Probing for AMIC A49LF040A, 512 KB: skipped.
> Probing for EMST F49B002UA, 256 KB: skipped.
> Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN29F010, 128 KB: skipped.
> Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
> Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
> Probing for Hyundai HY29F002T, 256 KB: skipped.
> Probing for Hyundai HY29F002B, 256 KB: skipped.
> Probing for Intel 28F001BX-B, 128 KB: skipped.
> Probing for Intel 28F001BX-T, 128 KB: skipped.
> Probing for Intel 28F004S5, 512 KB: skipped.
> Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
> Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
> Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
> Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX29F001B, 128 KB: skipped.
> Probing for Macronix MX29F001T, 128 KB: skipped.
> Probing for Macronix MX29F002B, 256 KB: skipped.
> Probing for Macronix MX29F002T, 256 KB: skipped.
> Probing for Macronix MX29LV040, 512 KB: skipped.
> Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm29F002T, 256 KB: skipped.
> Probing for PMC Pm29F002B, 256 KB: skipped.
> Probing for PMC Pm39LV010, 128 KB: skipped.
> Probing for PMC Pm39LV020, 256 KB: skipped.
> Probing for PMC Pm39LV040, 512 KB: skipped.
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e
> Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab
> Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e
> Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Chip status register is 00
> Chip status register: Block Protect Write Disable (BPL) is not set
> Chip status register: Auto Address Increment Programming (AAI) is not set
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
> Chip status register: Write Enable Latch (WEL) is not set
> Chip status register: Write In Progress (WIP/BUSY) is not set
> Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000.
> Probing for SST SST28SF040A, 512 KB: skipped.
> Probing for SST SST29EE010, 128 KB: skipped.
> Probing for SST SST29LE010, 128 KB: skipped.
> Probing for SST SST29EE020A, 256 KB: skipped.
> Probing for SST SST29LE020, 256 KB: skipped.
> Probing for SST SST39SF512, 64 KB: skipped.
> Probing for SST SST39SF010A, 128 KB: skipped.
> Probing for SST SST39SF020A, 256 KB: skipped.
> Probing for SST SST39SF040, 512 KB: skipped.
> Probing for SST SST39VF512, 64 KB: skipped.
> Probing for SST SST39VF010, 128 KB: skipped.
> Probing for SST SST39VF020, 256 KB: skipped.
> Probing for SST SST39VF040, 512 KB: skipped.
> Probing for SST SST39VF080, 1024 KB: skipped.
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x6b, id2 0xbc, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020, 256 KB: skipped.
> Probing for SST SST49LF020A, 256 KB: skipped.
> Probing for SST SST49LF040, 512 KB: skipped.
> Probing for SST SST49LF040B, 512 KB: skipped.
> Probing for SST SST49LF080A, 1024 KB: skipped.
> Probing for SST SST49LF160C, 2048 KB: skipped.
> Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
> Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
> Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
> Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M29F002B, 256 KB: skipped.
> Probing for ST M29F002T/NT, 256 KB: skipped.
> Probing for ST M29F040B, 512 KB: skipped.
> Probing for ST M29F400BT, 512 KB: skipped.
> Probing for ST M29W010B, 128 KB: skipped.
> Probing for ST M29W040B, 512 KB: skipped.
> Probing for ST M29W512B, 64 KB: skipped.
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50LPW116, 2048 KB: skipped.
> Probing for SyncMOS S29C31004T, 512 KB: skipped.
> Probing for SyncMOS S29C51001T, 128 KB: skipped.
> Probing for SyncMOS S29C51002T, 256 KB: skipped.
> Probing for SyncMOS S29C51004T, 512 KB: skipped.
> Probing for TI TMS29F002RB, 256 KB: skipped.
> Probing for TI TMS29F002RT, 256 KB: skipped.
> Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W29C011, 128 KB: skipped.
> Probing for Winbond W29C020C, 256 KB: skipped.
> Probing for Winbond W29C040P, 512 KB: skipped.
> Probing for Winbond W29EE011, 128 KB: skipped.
> Probing for Winbond W39V040A, 512 KB: skipped.
> Probing for Winbond W39V040B, 512 KB: skipped.
> Probing for Winbond W39V040C, 512 KB: skipped.
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: skipped.
> Probing for Winbond W49F002U, 256 KB: skipped.
> Probing for Winbond W49V002A, 256 KB: skipped.
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x8e
> ===
> This flash part has status UNTESTED for operations: ERASE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to [e-mail] if any of the above operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -Vw, -VE), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> No operations were specified.
>
> root@tower:~/flashrom-svn# flashrom -Vw JX58D615.BIN
>
> flashrom v0.9.2-r1060 on Linux 2.6.35-5-server (x86_64), built with libpci 3.0.0, 
> GCC 4.4.4, little endian
>
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop… OS timer resolution is 1 usecs, 1318M loops per second, 10 myus = 9 us, 100 myus = 90 us, 1000 myus = 899 us, 10000 myus = 9083 us, 4 myus = 4 us, OK.
>
> Initializing internal programmer
>
> No coreboot table found.
>
> DMI string system-manufacturer: “System Manufact”
>
> DMI string system-product-name: “System Product”
>
> DMI string system-version: “1.0”
>
> DMI string baseboard-manufacturer: “DFI Inc.”
>
> DMI string baseboard-product-name: “DFI LP JR X58”
>
> DMI string baseboard-version: “1.0”
>
> DMI string chassis-type: “Desktop”
>
> Found 
> ITE Super I/O, id 8718
>
> Found chipset “Intel ICH10R”, enabling flash write… chipset 
> PCI ID is 8086:3a16,
>
> 0xfff80000/0xffb80000 
> FWH IDSEL: 0×0
>
> 0xfff00000/0xffb00000 
> FWH IDSEL: 0×0
>
> 0xffe80000/0xffa80000 
> FWH IDSEL: 0×1
>
> 0xffe00000/0xffa00000 
> FWH IDSEL: 0×1
>
> 0xffd80000/0xff980000 
> FWH IDSEL: 0×2
>
> 0xffd00000/0xff900000 
> FWH IDSEL: 0×2
>
> 0xffc80000/0xff880000 
> FWH IDSEL: 0×3
>
> 0xffc00000/0xff800000 
> FWH IDSEL: 0×3
>
> 0xff700000/0xff300000 
> FWH IDSEL: 0×4
>
> 0xff600000/0xff200000 
> FWH IDSEL: 0×5
>
> 0xff500000/0xff100000 
> FWH IDSEL: 0×6
>
> 0xff400000/0xff000000 
> FWH IDSEL: 0×7
>
> 0xfff80000/0xffb80000 
> FWH decode enabled
>
> 0xfff00000/0xffb00000 
> FWH decode enabled
>
> 0xffe80000/0xffa80000 
> FWH decode disabled
>
> 0xffe00000/0xffa00000 
> FWH decode disabled
>
> 0xffd80000/0xff980000 
> FWH decode disabled
>
> 0xffd00000/0xff900000 
> FWH decode disabled
>
> 0xffc80000/0xff880000 
> FWH decode disabled
>
> 0xffc00000/0xff800000 
> FWH decode disabled
>
> 0xff700000/0xff300000 
> FWH decode disabled
>
> 0xff600000/0xff200000 
> FWH decode disabled
>
> 0xff500000/0xff100000 
> FWH decode disabled
>
> 0xff400000/0xff000000 
> FWH decode disabled
>
> Maximum 
> FWH chip size: 0×100000 bytes
>
> BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0×3
>
> Root Complex Register Block address = 0xfed1c000
>
> GCS = 0×65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0×0 (reserved)
>
> Top Swap : not enabled
>
> SPIBAR = 0xfed1c000 + 0×3800
>
> 0×04: 0×2008 (
> HSFS)
>
> FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
>
> 0×50: 0×00000202 (
> FRAP)
>
> BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
>
> 0×54: 0×00001fff (FREG0)
>
> 0×58: 0×00001fff (FREG1)
>
> 0×5C: 0×00001fff (FREG2)
>
> 0×60: 0×00001fff (FREG3)
>
> 0×64: 0×00001fff (FREG4)
>
> 0×74: 0×00000000 (PR0)
>
> 0×78: 0×00000000 (PR1)
>
> 0×7C: 0×00000000 (PR2)
>
> 0×80: 0×00000000 (PR3)
>
> 0×84: 0×00000000 (PR4)
>
> 0×90: 0×00414004 (
> SSFS, SSFC)
>
> 0×94: 0×5006     (
> PREOP)
>
> 0×96: 0×463b     (
> OPTYPE)
>
> 0×98: 0×05d80302 (
> OPMENU)
>
> 0×9C: 0xc79f0190 (
> OPMENU+4)
>
> 0xA0: 0×00000000 (
> BBAR)
>
> 0xB0: 0×00000000 (
> FDOC)
>
> Programming 
> OPCODES…
>
> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
>
> done
>
> SPI Read Configuration: prefetching disabled, caching enabled, OK.
>
> This chipset supports the following protocols: 
> FWH,SPI.
>
> No IT87* serial flash segment enabled.
>
> Probing for 
> AMD Am29F010A/B, 128 KB: skipped.
>
> Probing for 
> AMD Am29F002(N)BB, 256 KB: skipped.
>
> Probing for 
> AMD Am29F002(N)BT, 256 KB: skipped.
>
> Probing for 
> AMD Am29F016D, 2048 KB: skipped.
>
> Probing for 
> AMD Am29F040B, 512 KB: skipped.
>
> Probing for 
> AMD Am29F080B, 1024 KB: skipped.
>
> Probing for 
> AMD Am29LV040B, 512 KB: skipped.
>
> Probing for 
> AMD Am29LV081B, 1024 KB: skipped.
>
> Probing for 
> ASD AE49F2008, 256 KB: skipped.
>
> Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT29C512, 64 KB: skipped.
>
> Probing for Atmel AT29C010A, 128 KB: skipped.
>
> Probing for Atmel AT29C020, 256 KB: skipped.
>
> Probing for Atmel AT29C040A, 512 KB: skipped.
>
> Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Atmel AT49BV512, 64 KB: skipped.
>
> Probing for Atmel AT49F020, 256 KB: skipped.
>
> Probing for Atmel 
> AT49F002, 256 KB: skipped.
>
> Probing for Atmel 
> AT49F002T, 256 KB: skipped.
>
> Probing for 
> AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> AMIC A29002B, 256 KB: skipped.
>
> Probing for 
> AMIC A29002T, 256 KB: skipped.
>
> Probing for 
> AMIC A29040B, 512 KB: skipped.
>
> Probing for 
> AMIC A49LF040A, 512 KB: skipped.
>
> Probing for 
> EMST F49B002UA, 256 KB: skipped.
>
> Probing for 
> EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Eon EN29F010, 128 KB: skipped.
>
> Probing for 
> EON EN29F002(N)B, 256 KB: skipped.
>
> Probing for 
> EON EN29F002(N)T, 256 KB: skipped.
>
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
>
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
>
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
>
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
>
> Probing for Hyundai HY29F002T, 256 KB: skipped.
>
> Probing for Hyundai HY29F002B, 256 KB: skipped.
>
> Probing for Intel 28F001BX-B, 128 KB: skipped.
>
> Probing for Intel 28F001BX-T, 128 KB: skipped.
>
> Probing for Intel 28F004S5, 512 KB: skipped.
>
> Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
>
> Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
>
> Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
>
> Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
>
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix MX29F001B, 128 KB: skipped.
>
> Probing for Macronix MX29F001T, 128 KB: skipped.
>
> Probing for Macronix MX29F002B, 256 KB: skipped.
>
> Probing for Macronix MX29F002T, 256 KB: skipped.
>
> Probing for Macronix MX29LV040, 512 KB: skipped.
>
> Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC Pm29F002T, 256 KB: skipped.
>
> Probing for 
> PMC Pm29F002B, 256 KB: skipped.
>
> Probing for 
> PMC Pm39LV010, 128 KB: skipped.
>
> Probing for 
> PMC Pm39LV020, 256 KB: skipped.
>
> Probing for 
> PMC Pm39LV040, 512 KB: skipped.
>
> Probing for 
> PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0×8e
>
> Probing for 
> SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab
>
> Probing for 
> SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0×8e
>
> Probing for 
> SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Chip status register is 00
>
> Chip status register: Block Protect Write Disable (
> BPL) is not set
>
> Chip status register: Auto Address Increment Programming (
> AAI) is not set
>
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
>
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
>
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
>
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
>
> Chip status register: Write Enable Latch (
> WEL) is not set
>
> Chip status register: Write In Progress (
> WIP/BUSY) is not set
>
> Found chip “
> SST SST25VF080B” (1024 KB, SPI) at physical address 0xfff00000.
>
> Probing for 
> SST SST28SF040A, 512 KB: skipped.
>
> Probing for 
> SST SST29EE010, 128 KB: skipped.
>
> Probing for 
> SST SST29LE010, 128 KB: skipped.
>
> Probing for 
> SST SST29EE020A, 256 KB: skipped.
>
> Probing for 
> SST SST29LE020, 256 KB: skipped.
>
> Probing for 
> SST SST39SF512, 64 KB: skipped.
>
> Probing for 
> SST SST39SF010A, 128 KB: skipped.
>
> Probing for 
> SST SST39SF020A, 256 KB: skipped.
>
> Probing for 
> SST SST39SF040, 512 KB: skipped.
>
> Probing for 
> SST SST39VF512, 64 KB: skipped.
>
> Probing for 
> SST SST39VF010, 128 KB: skipped.
>
> Probing for 
> SST SST39VF020, 256 KB: skipped.
>
> Probing for 
> SST SST39VF040, 512 KB: skipped.
>
> Probing for 
> SST SST39VF080, 1024 KB: skipped.
>
> Probing for 
> SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0×6b, id2 0xbc, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF004C, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for 
> SST SST49LF020, 256 KB: skipped.
>
> Probing for 
> SST SST49LF020A, 256 KB: skipped.
>
> Probing for 
> SST SST49LF040, 512 KB: skipped.
>
> Probing for 
> SST SST49LF040B, 512 KB: skipped.
>
> Probing for 
> SST SST49LF080A, 1024 KB: skipped.
>
> Probing for 
> SST SST49LF160C, 2048 KB: skipped.
>
> Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P05.RES, 64 KB: Ignoring 
> RES in favour of RDID.
>
> Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P10.RES, 128 KB: Ignoring 
> RES in favour of RDID.
>
> Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P40-old, 512 KB: Ignoring 
> RES in favour of RDID.
>
> Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST M29F002B, 256 KB: skipped.
>
> Probing for ST M29F002T/NT, 256 KB: skipped.
>
> Probing for ST M29F040B, 512 KB: skipped.
>
> Probing for ST M29F400BT, 512 KB: skipped.
>
> Probing for ST M29W010B, 128 KB: skipped.
>
> Probing for ST M29W040B, 512 KB: skipped.
>
> Probing for ST M29W512B, 64 KB: skipped.
>
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for 
> FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50LPW116, 2048 KB: skipped.
>
> Probing for SyncMOS S29C31004T, 512 KB: skipped.
>
> Probing for SyncMOS S29C51001T, 128 KB: skipped.
>
> Probing for SyncMOS S29C51002T, 256 KB: skipped.
>
> Probing for SyncMOS S29C51004T, 512 KB: skipped.
>
> Probing for TI TMS29F002RB, 256 KB: skipped.
>
> Probing for TI TMS29F002RT, 256 KB: skipped.
>
> Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W25×64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Winbond W29C011, 128 KB: skipped.
>
> Probing for Winbond W29C020C, 256 KB: skipped.
>
> Probing for Winbond W29C040P, 512 KB: skipped.
>
> Probing for Winbond W29EE011, 128 KB: skipped.
>
> Probing for Winbond W39V040A, 512 KB: skipped.
>
> Probing for Winbond W39V040B, 512 KB: skipped.
>
> Probing for Winbond W39V040C, 512 KB: skipped.
>
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V080A, 1024 KB: skipped.
>
> Probing for Winbond W49F002U, 256 KB: skipped.
>
> Probing for Winbond W49V002A, 256 KB: skipped.
>
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Atmel unknown Atmel 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Macronix unknown Macronix 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for 
> SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for ST unknown ST 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Sanyo unknown Sanyo 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Generic unknown 
> SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
>
> Probing for Generic unknown 
> SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0×8e
>
> =
> This flash part has status UNTESTED for operations: ERASE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to [e-mail] if any of the above operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -Vw, -VE), and mention which mainboard or programmer you tested.
> Thanks for your help!
> =
>
> Flash image seems to be a legacy 
> BIOS. Disabling checks.
>
> Writing flash chip… Erasing flash before programming… Erasing flash chip… Looking at blockwise erase function 0… trying… 0×000000-0×000fff, ich_spi_send_multicommand: 
> FIXME: Add on-the-fly reprogramming of the chipset opcode list.
>
> Invalid 
> OPCODE 0×20
>
> spi_block_erase_20 failed during command execution at address 0×0
>
> Looking at blockwise erase function 1… trying… 0×000000-0×007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.
>
> Invalid 
> OPCODE 0×52
>
> spi_block_erase_52 failed during command execution at address 0×0
>
> Looking at blockwise erase function 2… trying… 0×000000-0×00ffff, 0×010000-0×01ffff, 0×020000-0×02ffff, 0×030000-0×03ffff, 0×040000-0×04ffff, 0×050000-0×05ffff, 0×060000-0×06ffff, 0×070000-0×07ffff, 0×080000-0×08ffff, 0×090000-0×09ffff, 0×0a0000-0×0affff, 0×0b0000-0×0bffff, 0×0c0000-0×0cffff, 0×0d0000-0×0dffff, 0×0e0000-0×0effff, 0×0f0000-0×0fffff,
>
> SUCCESS.
>
> done.
>
> COMPLETE.
>
> Verifying flash… 
> VERIFIED.
>
> root@tower:~/flashrom-svn#
>
> flashrom mailing list
> [e-mail]
> http://www.flashrom.org/mailman/listinfo/flashrom

[Uwe Hermann]

On Thu, Jul 29, 2010 at 10:10:46PM +0200, Daniel Flinkmann wrote:
> Just want to pop up this Success-Story, as I never saw an answer that the mainboard 
> was added to the list.

Thanks, updated the SST25VF080B status. Sorry for the delay.

Not sure if we can mark the board itself as tested as you did not use
the board as programmer per se in the usual way, but rather the SPI
header and a buspirate. We'll mark the buspirate as tested, this
needs some infrastructure fixes in flashrom, though.

Uwe.