Here are a couple more supported boards which I own.
Dan
I own both these boards, and they work fine with flashrom internal programming.
ECS RS485M-M is Socket AM2, AMD SB600-based Biostar TA780G M2+ is Socket AM2, AMD 780G-based
Signed-off-by: Daniel Lenski dlenski@gmail.com --- print.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/print.c b/print.c index 7533bf1..2f91cc8 100644 --- a/print.c +++ b/print.c @@ -359,6 +359,7 @@ const struct board_info boards_known[] = { B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", NULL), B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), + B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", NULL), B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?a...", NULL), @@ -368,6 +369,7 @@ const struct board_info boards_known[] = { B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&a...", NULL), B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?CategoryI...", NULL), B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&a...", NULL), + B("Elitegroup", "RS485M-M V1.0", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?CategoryI...", NULL), B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pro...", NULL), B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
Hi Dan,
On 29.07.2010 23:39, Daniel Lenski wrote:
Here are a couple more supported boards which I own.
It seems your mail was empty except for the sentence above.
Regards, Carl-Daniel
On Thu, Jul 29, 2010 at 05:39:06PM -0400, Daniel Lenski wrote:
I own both these boards, and they work fine with flashrom internal programming.
ECS RS485M-M is Socket AM2, AMD SB600-based Biostar TA780G M2+ is Socket AM2, AMD 780G-based
Signed-off-by: Daniel Lenski dlenski@gmail.com
Thanks, committed in r1127 with a small change (I dropped the "V1.0" from "RS485M-M V1.0", the website seems to always show a 1.0 version for all boards in general, even if no 2.0 version exists, in which case we usually don't print the version number. We usually only do that if two versions of the board exist with differing hardware.
Just to be sure: when you say "work fine with flashrom" you mean you tested write/erase and flashrom said VERIFIED? Only testing probe/read operations is not sufficient.
Uwe.
On Fri, 2010-07-30 at 19:12 +0200, Uwe Hermann wrote:
On Thu, Jul 29, 2010 at 05:39:06PM -0400, Daniel Lenski wrote:
I own both these boards, and they work fine with flashrom internal programming.
ECS RS485M-M is Socket AM2, AMD SB600-based Biostar TA780G M2+ is Socket AM2, AMD 780G-based
Signed-off-by: Daniel Lenski dlenski@gmail.com
Thanks, committed in r1127 with a small change (I dropped the "V1.0" from "RS485M-M V1.0", the website seems to always show a 1.0 version for all boards in general, even if no 2.0 version exists, in which case we usually don't print the version number. We usually only do that if two versions of the board exist with differing hardware.
Got it, good to know.
Just to be sure: when you say "work fine with flashrom" you mean you tested write/erase and flashrom said VERIFIED? Only testing probe/read operations is not sufficient.
Correct. Write/erase and correctly verified on both boards.
A detail: Flashrom can flash and verify an as-provided Biostar BIOS image on the TA780G board, but it will fail to boot. This is apparently because of some binary patch that the OEM utilities apply prior to flashing, and not because of a problem with the flash write/erase per se. Fortunately, Biostar has a really good BIOS failsafe mode.
From what I've gathered on the mailing list, such issues are usually not
signaled in the Flashrom docs or wiki... although maybe they should be?
Dan
On 30.07.2010 19:39, Daniel Lenski wrote:
On Fri, 2010-07-30 at 19:12 +0200, Uwe Hermann wrote:
On Thu, Jul 29, 2010 at 05:39:06PM -0400, Daniel Lenski wrote:
I own both these boards, and they work fine with flashrom internal programming.
ECS RS485M-M is Socket AM2, AMD SB600-based Biostar TA780G M2+ is Socket AM2, AMD 780G-based
Signed-off-by: Daniel Lenski dlenski@gmail.com
A detail: Flashrom can flash and verify an as-provided Biostar BIOS image on the TA780G board, but it will fail to boot. This is apparently because of some binary patch that the OEM utilities apply prior to flashing, and not because of a problem with the flash write/erase per se. Fortunately, Biostar has a really good BIOS failsafe mode.
From what I've gathered on the mailing list, such issues are usually not
signaled in the Flashrom docs or wiki... although maybe they should be?
We have a "note" field in the board list. It is NULL for your board, but it can be any string, and for problematic boards it usually is an URL to a mailing list message, and a few words about what's broken.
Regards, Carl-Daniel
-
Carl-Daniel Hailfinger -
Daniel Lenski -
Uwe Hermann