Re: [flashrom] Untested device success: M25PE40 - Read, Erase, Write (and apparently Probe?)

[Stefan Tauner]

On Mon, 18 Jan 2016 16:18:59 -0500
David Wood  wrote:
> Hello,
>
> Stefanct on freenode:#flashrom requested I email this to you.
>
> I've successfully reprogrammed a M25PE40 device, which was listed as
> untested by SVN flashrom.  Setup info and related TTY log follows.
>
> http://pix.jbevren.net/e/LTV/leaptv-debrick
>
> The ROM is left in-circuit, and the LeapTV is powered up after the
> Raspberry Pi boots.  Power is provided by the LeapTV system board.  More
> relevant information is available on the page linked above, including an
> image of the setup.

Hello David,

thanks for your report!
I have marked the flash chip as fully tested and will commit that later
together with other small changes.

Untested device success: M25PE40 - Read, Erase, Write (and apparently Probe?)

[David Wood]

No problem, I'm glad I was able to assist.

Send the crew my thanks, as Flashrom saved the device I'm working with from
the bin! :D

-David

On Fri, Jan 22, 2016 at 7:54 PM, Stefan Tauner <
[e-mail]> wrote:
> On Mon, 18 Jan 2016 16:18:59 -0500
> David Wood  wrote:
> > Hello,
> >
> > Stefanct on freenode:#flashrom requested I email this to you.
> >
> > I've successfully reprogrammed a M25PE40 device, which was listed as
> > untested by SVN flashrom.  Setup info and related TTY log follows.
> >
> > http://pix.jbevren.net/e/LTV/leaptv-debrick
> >
> > The ROM is left in-circuit, and the LeapTV is powered up after the
> > Raspberry Pi boots.  Power is provided by the LeapTV system board.  More
> > relevant information is available on the page linked above, including an
> > image of the setup.
>
> Hello David,
>
> thanks for your report!
> I have marked the flash chip as fully tested and will commit that later
> together with other small changes.
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner