Using git master:
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Bus Pirate firmware 6.1 and older does not support SPI speeds above 2 MHz. Limiting speed to 2 MHz. It is recommended to upgrade to firmware 6.2 or newer. Found Winbond flash chip "W25Q256.V" (32768 kB, SPI) on buspirate_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to firstname.lastname@example.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.