[PATCH 1/2] dediprog: Reimplement target chip option

[Nico Huber]

Signed-off-by: Nico Huber 
---
 dediprog.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/dediprog.c b/dediprog.c
index 019de46..b7276e5 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -942,7 +942,7 @@ int dediprog_init(void)
    int spispeed_idx = 1;
    int millivolt = 3500;
    long usedevice = 0;
-	long target = 1;
+	long target = FLASH_TYPE_APPLICATION_FLASH_1;
    int i, ret;

spispeed = extract_programmer_param("spispeed");
@@ -1014,7 +1014,18 @@ int dediprog_init(void)
    		free(target_str);
    		return 1;
    	}
-		msg_pinfo("Using target %li.\n", target);
+		switch (target) {
+		case 1:
+			msg_pinfo("Using target %s.\n", "FLASH_TYPE_APPLICATION_FLASH_1");
+			target = FLASH_TYPE_APPLICATION_FLASH_1;
+			break;
+		case 2:
+			msg_pinfo("Using target %s.\n", "FLASH_TYPE_APPLICATION_FLASH_2");
+			target = FLASH_TYPE_APPLICATION_FLASH_2;
+			break;
+		default:
+			break;
+		}
    }
    free(target_str);

@@ -1073,7 +1084,7 @@ int dediprog_init(void)
    dediprog_set_leds(LED_ALL);

/* Select target/socket, frequency and VCC. */
-	if (set_target_flash(FLASH_TYPE_APPLICATION_FLASH_1) ||
+	if (set_target_flash(target) ||
        dediprog_set_spi_speed(spispeed_idx) ||
        dediprog_set_spi_voltage(millivolt)) {
    	dediprog_set_leds(LED_ERROR);

[PATCH 2/2] dediprog: Fix bug where too many transfers would be queued

[Nico Huber]

We didn't check the total number of queued transfers in the inner most
loop. Up to DEDIPROG_ASYNC_TRANSFERS - 1 invalid transfers could be
queued therefore. So add another check on the total number.

Signed-off-by: Nico Huber 
---
 dediprog.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/dediprog.c b/dediprog.c
index b7276e5..6f82772 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -462,7 +462,9 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned

/* Now transfer requested chunks using libusb's asynchronous interface. */
    while (!status.error && (status.queued_idx < count)) {
-		while ((status.queued_idx - status.finished_idx) < DEDIPROG_ASYNC_TRANSFERS) {
+		while ((status.queued_idx < count) &&
+		       (status.queued_idx - status.finished_idx) < DEDIPROG_ASYNC_TRANSFERS)
+		{
    		transfer = transfers[status.queued_idx % DEDIPROG_ASYNC_TRANSFERS];
    		libusb_fill_bulk_transfer(transfer, dediprog_handle, 0x80 | dediprog_in_endpoint,
    				(unsigned char *)buf + status.queued_idx * chunksize, chunksize,

[David Hendricks]

Looks good to me.

Acked-by: David Hendricks

On Wed, May 4, 2016 at 4:37 AM, Nico Huber  wrote:
> Signed-off-by: Nico Huber
>
> dediprog.c | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/dediprog.c b/dediprog.c
> index 019de46..b7276e5 100644
> --- a/dediprog.c
> +++ b/dediprog.c
> @@ -942,7 +942,7 @@ int dediprog_init(void)
>         int spispeed_idx = 1;
>         int millivolt = 3500;
>         long usedevice = 0;
>   long target = 1;
>   long target = FLASH_TYPE_APPLICATION_FLASH_1;
>   int i, ret;
>
>   spispeed = extract_programmer_param("spispeed");
>
> @@ -1014,7 +1014,18 @@ int dediprog_init(void)
>                         free(target_str);
>                         return 1;
>                 }
>           msg_pinfo("Using target %li.\n", target);
>           switch (target) {
>           case 1:
>                   msg_pinfo("Using target %s.\n",
>
> "FLASH_TYPE_APPLICATION_FLASH_1");
>                   target = FLASH_TYPE_APPLICATION_FLASH_1;
>                   break;
>           case 2:
>                   msg_pinfo("Using target %s.\n",
>
> "FLASH_TYPE_APPLICATION_FLASH_2");
>                   target = FLASH_TYPE_APPLICATION_FLASH_2;
>                   break;
>           default:
>                   break;
>           }
>   }
>   free(target_str);
>
> @@ -1073,7 +1084,7 @@ int dediprog_init(void)
>         dediprog_set_leds(LED_ALL);
>     /* Select target/socket, frequency and VCC. */
>   if (set_target_flash(FLASH_TYPE_APPLICATION_FLASH_1) ||
>   if (set_target_flash(target) ||
>       dediprog_set_spi_speed(spispeed_idx) ||
>       dediprog_set_spi_voltage(millivolt)) {
>           dediprog_set_leds(LED_ERROR);
>
> flashrom mailing list
> [e-mail]
> https://www.flashrom.org/mailman/listinfo/flashrom

[PATCH 2/2] dediprog: Fix bug where too many transfers would be queued

[David Hendricks]

Looks good to me.

Acked-by: David Hendricks

On Wed, May 4, 2016 at 4:37 AM, Nico Huber  wrote:
> We didn't check the total number of queued transfers in the inner most
> loop. Up to DEDIPROG_ASYNC_TRANSFERS - 1 invalid transfers could be
> queued therefore. So add another check on the total number.
> Signed-off-by: Nico Huber
>
> dediprog.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/dediprog.c b/dediprog.c
> index b7276e5..6f82772 100644
> --- a/dediprog.c
> +++ b/dediprog.c
> @@ -462,7 +462,9 @@ static int dediprog_spi_bulk_read(struct flashctx
> *flash, uint8_t *buf, unsigned
>     /* Now transfer requested chunks using libusb's asynchronous
>
> interface. */
>         while (!status.error && (status.queued_idx < count)) {
>           while ((status.queued_idx - status.finished_idx) <
>
> DEDIPROG_ASYNC_TRANSFERS) {
>           while ((status.queued_idx < count) &&
>                  (status.queued_idx - status.finished_idx) <
>
> DEDIPROG_ASYNC_TRANSFERS)
>           {
>                   transfer = transfers[status.queued_idx %
>
> DEDIPROG_ASYNC_TRANSFERS];
>                         libusb_fill_bulk_transfer(transfer,
> dediprog_handle, 0x80 | dediprog_in_endpoint,
>                                         (unsigned char *)buf +
> status.queued_idx * chunksize, chunksize,
> --
> 2.7.0
>
> flashrom mailing list
> [e-mail]
> https://www.flashrom.org/mailman/listinfo/flashrom