Re: [flashrom] Gigabyte Ga-k8ns

[Stefan Tauner]

On Thu, 30 Apr 2015 18:03:55 +0300
"nicolae788 ."  wrote:
> Hello, i want to inform you that Gigabyte Ga-k8ns was successfully flashed
> with the "boardenable=force". This is the 754 socket for AMD processors.
> The board has a non-existent jumper location were it's possible to solder a
> bridge to disable protection, but it works with the above option. I noticed
> that it identified this board as a 939 Pro version but it's not. However
> everything went smooth.

Hi Alex,

thanks for your report. Which version do you have exactly? There are
three different 754-socket boards named K8NS:

rev 1: http://www.gigabyte.com/products/product-page.aspx?pid=1784#ov
rev 2: http://www.gigabyte.com/products/product-page.aspx?pid=2275#ov
pro rev 1: http://www.gigabyte.com/products/product-page.aspx?pid=1783#ov

Can you please also provide the output of lspci -nnv and a flashrom
logfile (just add -o flashrom.log to the command line; no actual write
needed just probing for the chip would be enough)?

Gigabyte Ga-k8ns

[nicolae788 .]

Hi Stefan,

Unfortunately i can only tell you that it was a REV 1.1. I do not have the
board anymore. The next time i will send you a report i will be careful to
include the listings of LSPCI and flashrom -o.

All the best.

Alex.

On Sat, Jun 20, 2015 at 11:52 PM, Stefan Tauner <
[e-mail]> wrote:
> On Thu, 30 Apr 2015 18:03:55 +0300
> "nicolae788 ."  wrote:
> > Hello, i want to inform you that Gigabyte Ga-k8ns was successfully
>
> flashed
> > with the "boardenable=force". This is the 754 socket for AMD processors.
> > The board has a non-existent jumper location were it's possible to
>
> solder a
> > bridge to disable protection, but it works with the above option. I
>
> noticed
> > that it identified this board as a 939 Pro version but it's not. However
> > everything went smooth.
>
> Hi Alex,
>
> thanks for your report. Which version do you have exactly? There are
> three different 754-socket boards named K8NS:
>
> rev 1: http://www.gigabyte.com/products/product-page.aspx?pid=1784#ov
> rev 2: http://www.gigabyte.com/products/product-page.aspx?pid=2275#ov
> pro rev 1: http://www.gigabyte.com/products/product-page.aspx?pid=1783#ov
>
> Can you please also provide the output of lspci -nnv and a flashrom
> logfile (just add -o flashrom.log to the command line; no actual write
> needed just probing for the chip would be enough)?