Success report

[Måns Thörnqvist]

Hi!

I’ve successfully read and written my Gigabyte GA-P55-USB3 motherboard bios
(update från F8 to F10g). This should probably be added to the list of
supported hardware.

Thanks for a great app!

/Måns

[Stefan Tauner]

On Sun, 30 Nov 2014 14:14:51 +0100
Måns Thörnqvist  wrote:
> Hi!
>
> I’ve successfully read and written my Gigabyte GA-P55-USB3 motherboard bios
> (update från F8 to F10g). This should probably be added to the list of
> supported hardware.

Hi,

do you know which revision your board is? I think they can be
distinguished by the availability of the "On/Off Charge USB port" that
was added in revision 2, cf.
http://www.gigabyte.com/products/product-page.aspx?pid=3311
http://www.gigabyte.com/products/product-page.aspx?pid=3440

[Måns Thörnqvist]

Hello!

Sorry for the late reply. The motherboard is a GA-P55-USB3 revision 2.0 (printed on the circuit board). It may be useful to know that it was NOT possible to extract that info from dmidecode, I had to open the machine and have a look.

/Måns

-----Ursprungligt meddelande-----
Från: Stefan Tauner [mailto:[e-mail]] 
Skickat: den 7 december 2014 11:16
Till: Måns Thörnqvist
Kopia: [e-mail]
Ämne: Re: [flashrom] Success report

On Sun, 30 Nov 2014 14:14:51 +0100
Måns Thörnqvist  wrote:
> Hi!
>
> I’ve successfully read and written my Gigabyte GA-P55-USB3 motherboard 
> bios (update från F8 to F10g). This should probably be added to the 
> list of supported hardware.

Hi,

do you know which revision your board is? I think they can be distinguished by the availability of the "On/Off Charge USB port" that was added in revision 2, cf.
http://www.gigabyte.com/products/product-page.aspx?pid=3311
http://www.gigabyte.com/products/product-page.aspx?pid=3440

[Stefan Tauner]

On Sun, 14 Dec 2014 20:28:10 +0100
Måns Thörnqvist  wrote:
> Hello!
>
> Sorry for the late reply. The motherboard is a GA-P55-USB3 revision 2.0 (printed on the circuit board). It may be useful to know that it was NOT possible to extract that info from dmidecode, I had to open the machine and have a look.

Hello Måns,

thanks for your report!
I have added your board to our list of supported hardware and will
commit that later together with other small changes.