Is K7S6A supported by flashrom?

[spirals]

Hi, Ran flashrom and it reports "No EEPROM/flash device found", same 
with  -m ecs:k7s5a.  Any suggestions how I can test further. I am 
running Lenny and my cpu [an AMD 2600] is being mis-reported as 1406?  
regards, Dave (dja.)

[Carl-Daniel Hailfinger]

Hi Dave,

On 13.10.2009 21:53, David J Aldridge wrote:
> Ran flashrom and it reports "No EEPROM/flash device found", same with 
> -m ecs:k7s5a.

Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
-dV" and if tell us if your board is
K7S6A (V1.0)
or
K7S6A (V1.0A)

Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&am...
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&a...

Regards,
Carl-Daniel

[Adrian Glaubitz]

Hi,

On Thu, Dec 3, 2009 at 12:46 AM, Luc Verhaegen  wrote:
> > Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
> > -dV" and if tell us if your board is
> > K7S6A (V1.0)
> > or
> > K7S6A (V1.0A)
> >
> > Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
> > http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&am...
> > http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&a...
> >
> > Regards,
> > Carl-Daniel
>
> David,
>
> Without the output of flashrom failing and an lspci -vvvnnxxx i will not
> even attempt looking at that bios.

No need to look. The K7S5A is supported. I successfully flashed 5
K7S5A without a hitch. Carl-Daniel marked it as supported already.

Adrian

[Luc Verhaegen]

On Tue, Oct 13, 2009 at 11:20:23PM +0200, Carl-Daniel Hailfinger wrote:
> Hi Dave,
>
> On 13.10.2009 21:53, David J Aldridge wrote:
> > Ran flashrom and it reports "No EEPROM/flash device found", same with 
> > -m ecs:k7s5a.
>
> Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
> -dV" and if tell us if your board is
> K7S6A (V1.0)
> or
> K7S6A (V1.0A)
>
> Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&am...
> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&a...
>
> Regards,
> Carl-Daniel

David,

Without the output of flashrom failing and an lspci -vvvnnxxx i will not 
even attempt looking at that bios.

Please provide the requested info :)

Luc Verhaegen.

[Luc Verhaegen]

On Thu, Dec 03, 2009 at 12:46:39AM +0100, Luc Verhaegen wrote:
> David,
>
> Without the output of flashrom failing and an lspci -vvvnnxxx i will not 
> even attempt looking at that bios.
>
> Please provide the requested info :)
>
> Luc Verhaegen.

Ah, ok, this was later received out of thread.

Please check a recent flashrom version, it might detect your chipset.

Luc Verhaegen.

[Luc Verhaegen]

On Thu, Dec 03, 2009 at 12:45:17AM +0100, Adrian Glaubitz wrote:
> Hi,
>
> On Thu, Dec 3, 2009 at 12:46 AM, Luc Verhaegen  wrote:
> > > Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
> > > -dV" and if tell us if your board is
> > > K7S6A (V1.0)
> > > or
> > > K7S6A (V1.0A)
> > >
> > > Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
> > > http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&am...
> > > http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&a...
> > >
> > > Regards,
> > > Carl-Daniel
> >
> > David,
> >
> > Without the output of flashrom failing and an lspci -vvvnnxxx i will not
> > even attempt looking at that bios.
>
> No need to look. The K7S5A is supported. I successfully flashed 5
> K7S5A without a hitch. Carl-Daniel marked it as supported already.
>
> Adrian

Aha, ok, thanks :)

Luc Verhaegen.

[Adrian Glaubitz]

Hi,
> > No need to look. The K7S5A is supported. I successfully flashed 5
> > K7S5A without a hitch. Carl-Daniel marked it as supported already.

Oops, I just realized I didn't look closely enough. spirals was
talking about a "K7S6A", not "5A". I guess that board is slightly
different. Sorry for the fuss, it's already a bit too late tonight.

Adrian