Is K7S6A supported by flashrom?
Hi, Ran flashrom and it reports "No EEPROM/flash device found", same with -m ecs:k7s5a. Any suggestions how I can test further. I am running Lenny and my cpu [an AMD 2600] is being mis-reported as 1406? regards, Dave (dja.)
Hi Dave, On 13.10.2009 21:53, David J Aldridge wrote:
Ran flashrom and it reports "No EEPROM/flash device found", same with -m ecs:k7s5a.
Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool -dV" and if tell us if your board is K7S6A (V1.0) or K7S6A (V1.0A) Luc: BIOS downloads are here (not sure which PCB is the one Dave has): http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&Ca... http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&C... Regards, Carl-Daniel -- Developer quote of the week: "We are juggling too many chainsaws and flaming arrows and tigers."
On Tue, Oct 13, 2009 at 11:20:23PM +0200, Carl-Daniel Hailfinger wrote:
Hi Dave,
On 13.10.2009 21:53, David J Aldridge wrote:
Ran flashrom and it reports "No EEPROM/flash device found", same with -m ecs:k7s5a.
Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool -dV" and if tell us if your board is K7S6A (V1.0) or K7S6A (V1.0A)
Luc: BIOS downloads are here (not sure which PCB is the one Dave has): http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&Ca... http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&C...
Regards, Carl-Daniel
David, Without the output of flashrom failing and an lspci -vvvnnxxx i will not even attempt looking at that bios. Please provide the requested info :) Luc Verhaegen.
Hi, On Thu, Dec 3, 2009 at 12:46 AM, Luc Verhaegen <libv@skynet.be> wrote:
Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool -dV" and if tell us if your board is K7S6A (V1.0) or K7S6A (V1.0A)
Luc: BIOS downloads are here (not sure which PCB is the one Dave has): http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&Ca... http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&C...
Regards, Carl-Daniel
David,
Without the output of flashrom failing and an lspci -vvvnnxxx i will not even attempt looking at that bios.
No need to look. The K7S5A is supported. I successfully flashed 5 K7S5A without a hitch. Carl-Daniel marked it as supported already. Adrian
On Thu, Dec 03, 2009 at 12:45:17AM +0100, Adrian Glaubitz wrote:
Hi,
On Thu, Dec 3, 2009 at 12:46 AM, Luc Verhaegen <libv@skynet.be> wrote:
Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool -dV" and if tell us if your board is K7S6A (V1.0) or K7S6A (V1.0A)
Luc: BIOS downloads are here (not sure which PCB is the one Dave has): http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&Ca... http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&C...
Regards, Carl-Daniel
David,
Without the output of flashrom failing and an lspci -vvvnnxxx i will not even attempt looking at that bios.
No need to look. The K7S5A is supported. I successfully flashed 5 K7S5A without a hitch. Carl-Daniel marked it as supported already.
Adrian
Aha, ok, thanks :) Luc Verhaegen.
Hi,
No need to look. The K7S5A is supported. I successfully flashed 5 K7S5A without a hitch. Carl-Daniel marked it as supported already.
Oops, I just realized I didn't look closely enough. spirals was talking about a "K7S6A", not "5A". I guess that board is slightly different. Sorry for the fuss, it's already a bit too late tonight. Adrian
On Thu, Dec 03, 2009 at 12:46:39AM +0100, Luc Verhaegen wrote:
David,
Without the output of flashrom failing and an lspci -vvvnnxxx i will not even attempt looking at that bios.
Please provide the requested info :)
Luc Verhaegen.
Ah, ok, this was later received out of thread. Please check a recent flashrom version, it might detect your chipset. Luc Verhaegen.
participants (4)
-
Adrian Glaubitz -
Carl-Daniel Hailfinger -
Luc Verhaegen -
spirals