Re: [flashrom] Mainboard no tested

[Stefan Tauner]

On Sun, 15 Jan 2012 19:04:25 -0500
hector j  wrote:
> 2012/1/15 Stefan Tauner
> > from my very limited experience i think the chipset usually works just
> > fine. in this case flashrom does not detect the flash chip. this can
> > mean two things:
> > either we have to toggle an IO pin of the chipset (dependent on the
> >
> > mainboard) to enable the chip at all, or
> > the chip is not supported yet.
> >
> > most probably you just need a board enable
> > (http://flashrom.org/Board_Enable) due to the first option.
> >
> > can you please confirm that this is you board
> > http://www.msi.com/product/mb/K9N6PGM2-V.html#/?div=BIOS
> > please also provide the output of lspci -xxxnnvv (run as root).
> > creating the board enable can take days to months dependent on the
> > motivation of our volunteers.
>
> Hi,
> Is affirmative that's my board,but it not works,now i have two of the same
> boards and testing in the first didn't work,and the second is awaiting
> for,so im  providing you  the  output,i'll  read  the link.
>
> thanks for your support.

the output of just "lspci" is not enough, we need the additional
information given by "lspci -xxxnnvv".

Mainboard no tested

[hector j]

2012/1/16 Stefan Tauner
> On Sun, 15 Jan 2012 19:04:25 -0500
> hector j  wrote:
> > 2012/1/15 Stefan Tauner
> > > from my very limited experience i think the chipset usually works just
> > > fine. in this case flashrom does not detect the flash chip. this can
> > > mean two things:
> > > either we have to toggle an IO pin of the chipset (dependent on the
> > >
> > > mainboard) to enable the chip at all, or
> > > the chip is not supported yet.
> > >
> > > most probably you just need a board enable
> > > (http://flashrom.org/Board_Enable) due to the first option.
> > >
> > > can you please confirm that this is you board
> > > http://www.msi.com/product/mb/K9N6PGM2-V.html#/?div=BIOS
> > > please also provide the output of lspci -xxxnnvv (run as root).
> > > creating the board enable can take days to months dependent on the
> > > motivation of our volunteers.
> >
> > Hi,
> > Is affirmative that's my board,but it not works,now i have two of the
>
> same
> > boards and testing in the first didn't work,and the second is awaiting
> > for,so im  providing you  the  output,i'll  read  the link.
> >
> > thanks for your support.
>
> the output of just "lspci" is not enough, we need the additional
> information given by "lspci -xxxnnvv".

ups,sorry
-----
*"Quien se infiltra en la oscuridad ,es Quien encuentra la verdad .Lao Tse "
*
Debian User
Penetration Testing
Colombian Security Researcher
LinuxUser #506301
------------------------------------
Puffy Loves