#5: Winbond W25Q128 for ICH ----------------------------------+--------------------------- Reporter: rheneus.paul@… | Owner: hailfinger Type: defect | Status: new Priority: critical | Milestone: Component: flashrom | Version: Keywords: | Dependencies: Patch Status: there is no patch | ----------------------------------+--------------------------- I could not use flashrom 0.9.3 -r1205 to detect Winbond W25Q128 to program BIOS. Attached the read log
Just by adding WINBOND_NEX_W25Q128 0x4018 in flashchips.c for W25Q128, similar to W25Q64 throws run Opcode 0x3 error for read.
Attached Verbose log of read
#5: Winbond W25Q128 for ICH -------------------------------+---------------------------------- Reporter: rheneus.paul@… | Owner: hailfinger Type: defect | Status: new Priority: critical | Milestone: Component: flashrom | Version: Resolution: | Keywords: Dependencies: | Patch Status: there is no patch -------------------------------+----------------------------------
Comment (by Marc Randolph <mrand@…>):
Here is a link to the datasheet: http://www.winbond.com.tw/NR/rdonlyres/1C7E7EF8-ACBF-47EC- BE16-D668A7933A21/0/W25Q128BV.pdf
I'm attaching the patch that Rheneus.paul submitted to the mailing list which adds W25Q128 to flashchips.c. It throws opcode 0x3 errors on read.
#5: Winbond W25Q128 for ICH -------------------------------+---------------------------------- Reporter: rheneus.paul@… | Owner: hailfinger Type: defect | Status: new Priority: critical | Milestone: Component: flashrom | Version: Resolution: | Keywords: Dependencies: | Patch Status: there is no patch -------------------------------+----------------------------------
Comment (by anonymous):
Is this really the way it suppose to work? By the what could mean error fatal error access to undeclared static property ?
-
flashrom