Bios Flash | K8m800-M2 v1.0

[Ray Marr]

The attached file is the information requested from the irc channel.

Ubuntu101 | www.raymondmarr.com
Bicycling | www.bikejourneys.wordpress.com
Personal Growth | www.homeofknatchwa.net

[Sean Nelson]

I took a look at your board enable. If you can please test this patch by 
download the latest svn and 'patch -p1 < k8m800m1.patch'.

I think all we need is a board entry and use ite8705f_write_enable_2e.

Signed-off-by: Sean Nelson

If it works, please send an ack in the form of: 'Acked-by: Real Name 
'

[Carl-Daniel Hailfinger]

Hi Ray,

did you already have time to test?

If not, there is an alternative patch (please apply it against a clean
source tree):
http://patchwork.coreboot.org/patch/1475/
download the patch at http://patchwork.coreboot.org/patch/1475/raw/

The alternative patch includes autodetection, and that means your board
and all other boards with similar chips should start working automatically.

On 19.05.2010 07:54, Sean Nelson wrote:
> I took a look at your board enable. If you can please test this patch
> by download the latest svn and 'patch -p1 < k8m800m1.patch'.
>
> I think all we need is a board entry and use ite8705f_write_enable_2e.
>
> Signed-off-by: Sean Nelson
>
> If it works, please send an ack in the form of: 'Acked-by: Real Name
> '

Regards,
Carl-Daniel

[Carl-Daniel Hailfinger]

Hi Ray,

I have good news for you. Your board should be supported out of the box
(no patches needed) with latest flashrom. Could you please check if that
is the case and reply-to-all with the test result?

Thanks!

On 07.06.2010 16:38, Carl-Daniel Hailfinger wrote:
> did you already have time to test?
>
> If not, there is an alternative patch (please apply it against a clean
> source tree):
> http://patchwork.coreboot.org/patch/1475/
> download the patch at http://patchwork.coreboot.org/patch/1475/raw/
>
> The alternative patch includes autodetection, and that means your board
> and all other boards with similar chips should start working automatically.
>
> On 19.05.2010 07:54, Sean Nelson wrote:
> > I took a look at your board enable. If you can please test this [...]

Regards,
Carl-Daniel