Guys,
Does anyone know why bit 0 in the BIOS Control register cannot be set using Intel® X79 Express Chipset. This is what I get when running: flashrom -r /tmp/bios.rom -p internal or flashrom -w xx.rom -p internal
*Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on X79 failed.* *New value is 0x2a.*
The read command completes and I get the correct data, but subsequently when I try to erase and program my flash (./flashrom -w xx.rom -p internal:ich_spi_force=yes) I get FCERR (on the first sector erase) which implies that the BIOS is write protected.
Thank you in advance for any advice. ---- Rich Futyma
**
[image: Inline image 1]
CONFIDENTIALITY This e-mail message and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail message, you are hereby notified that any dissemination, distribution or copying of this e-mail message, and any attachments thereto, is strictly prohibited. If you have received this e-mail message in error, please immediately notify the sender and permanently delete the original and any copies of this email and any prints thereof. ABSENT AN EXPRESS STATEMENT TO THE CONTRARY HEREINABOVE, THIS E-MAIL IS NOT INTENDED AS A SUBSTITUTE FOR A WRITING. Notwithstanding the Uniform Electronic Transactions Act or the applicability of any other law of similar substance and effect, absent an express statement to the contrary hereinabove, this e-mail message its contents, and any attachments hereto are not intended to represent an offer or acceptance to enter into a contract and are not otherwise intended to bind the sender, Sanmina Corporation (or any of its subsidiaries), or any other person or entity.
