hello ;

by this i report a successful read of Winbond flash chip "W25Q128.W" (16384 kB, SPI) 

board : NOKIA phone 3310 (2017) TA-1030

using loader from : https://github.com/xobs/fernly

patch applied to flashrom : https://github.com/xobs/fernly/blob/master/flashrom-fernvale.patch

thankd:

attached is th log:

-------------------------------------------------------------------------------------------

dr@dr-VirtualBox:~/fernly-master/flashrom-1.0$ sudo ./flashrom --programmer fernvale_spi:dev=/dev/fernvale  --read flash.dat

flashrom v1.0 on Linux 4.15.0-45-generic (x86_64)

flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).

Found Winbond flash chip "W25Q128.W" (16384 kB, SPI) on fernvale_spi.

===

This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE

The test status of this chip may have been updated in the latest development

version of flashrom. If you are running the latest development version,

please email a report to flashrom@flashrom.org if any of the above operations

work correctly for you with this flash chip. Please include the flashrom log

file for all operations you tested (see the man page for details), and mention

which mainboard or programmer you tested in the subject line.

Thanks for your help!

Reading flash... done.