[flashrom] [PATCH] Clean up main loop

[Carl-Daniel Hailfinger]

To prepare for libflashrom I wanted to make the main loop more readable
and more correct and factor out stuff which can be useful in libflashrom.

- Factor out printing of supported devices to print.c.
- Adjust name of wiki printing function to fit the pattern.
- Abort if the user specified --verify and --noverify at the same time.
- Check for extra parameters which don't fit commandline syntax.

Signed-off-by: Carl-Daniel Hailfinger

Index: flashrom-mainloop_cleanup/flash.h
===================================================================
--- flashrom-mainloop_cleanup/flash.h	(Revision 755)
+++ flashrom-mainloop_cleanup/flash.h	(Arbeitskopie)
@@ -338,11 +338,9 @@

/* print.c */
 char *flashbuses_to_text(enum chipbustype bustype);
-void print_supported_chips(void);
-void print_supported_chipsets(void);
-void print_supported_boards(void);
+void print_supported(void);
 void print_supported_pcidevs(struct pcidev_status *devs);
-void print_wiki_tables(void);
+void print_supported_wiki(void);

/* board_enable.c */
 void w836xx_ext_enter(uint16_t port);
Index: flashrom-mainloop_cleanup/flashrom.c
===================================================================
--- flashrom-mainloop_cleanup/flashrom.c	(Revision 755)
+++ flashrom-mainloop_cleanup/flashrom.c	(Arbeitskopie)
@@ -801,14 +801,25 @@
    		write_it = 1;
    		break;
    	case 'v':
+			//FIXME: gracefully handle superfluous -v
    		if (++operation_specified > 1) {
    			fprintf(stderr, "More than one operation "
    				"specified. Aborting.\n");
    			exit(1);
    		}
+			if (dont_verify_it) {
+				fprintf(stderr, "--verify and --noverify are"
+					"mutually exclusive. Aborting.\n");
+				exit(1);
+			}
    		verify_it = 1;
    		break;
    	case 'n':
+			if (verify_it) {
+				fprintf(stderr, "--verify and --noverify are"
+					"mutually exclusive. Aborting.\n");
+				exit(1);
+			}
    		dont_verify_it = 1;
    		break;
    	case 'c':
@@ -896,29 +907,13 @@
    }

if (list_supported) {
-		print_supported_chips();
-		print_supported_chipsets();
-		print_supported_boards();
-		printf("\nSupported PCI devices flashrom can use "
-		       "as programmer:\n\n");
-#if NIC3COM_SUPPORT == 1
-		print_supported_pcidevs(nics_3com);
-#endif
-#if GFXNVIDIA_SUPPORT == 1
-		print_supported_pcidevs(gfx_nvidia);
-#endif
-#if DRKAISER_SUPPORT == 1
-		print_supported_pcidevs(drkaiser_pcidev);
-#endif
-#if SATASII_SUPPORT == 1
-		print_supported_pcidevs(satas_sii);
-#endif
+		print_supported();
    	exit(0);
    }

#if PRINT_WIKI_SUPPORT == 1
    if (list_supported_wiki) {
-		print_wiki_tables();
+		print_supported_wiki();
    	exit(0);
    }
 #endif
@@ -930,6 +925,11 @@

if (optind < argc)
    	filename = argv[optind++];
+	
+	if (optind < argc) {
+		printf("Error: Extra parameter found.\n");
+		usage(argv[0]);
+	}

if (programmer_init()) {
    	fprintf(stderr, "Error: Programmer initialization failed.\n");
@@ -1146,7 +1146,7 @@
    	if (write_it)
    		programmer_delay(1000*1000);
    	ret = verify_flash(flash, buf);
-		/* If we tried to write, and now we don't properly verify, we
+		/* If we tried to write, and verification now fails, we
    	 * might have an emergency situation.
    	 */
    	if (ret && write_it)
Index: flashrom-mainloop_cleanup/print_wiki.c
===================================================================
--- flashrom-mainloop_cleanup/print_wiki.c	(Revision 755)
+++ flashrom-mainloop_cleanup/print_wiki.c	(Arbeitskopie)
@@ -535,7 +535,7 @@
    }
 }

-void print_wiki_tables(void)
+void print_supported_wiki(void)
 {
    time_t t = time(NULL);

Index: flashrom-mainloop_cleanup/print.c
===================================================================
--- flashrom-mainloop_cleanup/print.c	(Revision 755)
+++ flashrom-mainloop_cleanup/print.c	(Arbeitskopie)
@@ -222,7 +222,28 @@
    	"Laptops which have been verified to NOT work yet");
 }

+void print_supported(void)
+{
+		print_supported_chips();
+		print_supported_chipsets();
+		print_supported_boards();
+		printf("\nSupported PCI devices flashrom can use "
+		       "as programmer:\n\n");
+#if NIC3COM_SUPPORT == 1
+		print_supported_pcidevs(nics_3com);
+#endif
+#if GFXNVIDIA_SUPPORT == 1
+		print_supported_pcidevs(gfx_nvidia);
+#endif
+#if DRKAISER_SUPPORT == 1
+		print_supported_pcidevs(drkaiser_pcidev);
+#endif
+#if SATASII_SUPPORT == 1
+		print_supported_pcidevs(satas_sii);
+#endif
+}

+
 /* Please keep this list alphabetically ordered by vendor/board. */
 const struct board_info boards_ok[] = {
    /* Verified working boards that don't need write-enables. */