Hello,

We’re attempting to update our device using flashrom v1.1-rc2 and it does not update successfully.  Attached is the verbose report as requested by the output.

 

The board we’re using is based on the DFI KU171/173, with Intel Kaby Lake i3-7100U CPU, Intel 100 Series Chipset Family LPC Controller/eSPI Controller (PCI id 8086:9d4e.  BIOS flash memory is Winbond W25Q128FV.

 

Please let me know if there is any further information required.

 

Thank you,

Erik Hanley

Principal Software Engineer

Point of Access Products & Services

55 Technology Way

West Greenwich, RI 02817 USA

Phone: +1 401 392 7186

 

 

CONFIDENTIALITY NOTICE: This message is the property of International Game Technology PLC and/or its subsidiaries and may contain proprietary, confidential or trade secret information. This message is intended solely for the use of the addressee. If you are not the intended recipient and have received this message in error, please delete this message from your system. Any unauthorized reading, distribution, copying, or other use of this message or its attachments is strictly prohibited.