Update 01/06: 
=> Verified, r1861 looks OK at Rangeley dual flash platforms;
     and the regression of single flash remained OK as well.

------------------------------------------
r1861 (Dual Flash, 2*16 MB)
------------------------------------------
Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash chips with a combined density of 32768 kB.
There is only one partition containing the whole address space (0x000000 - 0x1ffffff).
There are 8192 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (32768 kB, Programmer-specific) mapped at physical address 0x0000000000000000.
Found Programmer flash chip "Opaque flash chip" (32768 kB, Programmer-specific).
Reading flash... Reading 33554432 bytes starting at 0x000000.



------------------------------------------
r1860 (Dual Flash, 2*16 MB)
------------------------------------------
Density of ICH SPI component with index 0 is invalid.Encoded density is 0xd while maximum allowed is 0x7.
Could not determine density of flash component 0.
FAILED!
FATAL ERROR!


------------------------------------------
r1861 (Single Flash, 1*8 MB)
------------------------------------------
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific).
Reading flash... Reading 8388608 bytes starting at 0x000000.

------------------------------------------
r1860 (Single Flash, 1*8 MB)
------------------------------------------
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific).
Reading flash... Reading 8388608 bytes starting at 0x000000





2015-01-06 7:01 GMT+08:00 Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>:
On Mon, 5 Jan 2015 15:41:13 +0800
"Tai-Hong (Type) Wu" <thwu@lunartoday.com> wrote:

>       Thanks for the review and remedy.
>       Certainly, I will again verify the patch once it being committed into
> official svn-stream  (Looks not in r1860 yet?)
>       and/or 0.9.8-release.

OK, I normally prefer tests before committing anything, but I hope
there won't be a problem here. I have committed the change in r1861.
Thanks for your help!

--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner