flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel ICH9M-E", enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x461: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6018 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 3, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0, BMRAG 0, BRWA 255, BRRA 255 0x54: 0x00000000 (FREG0) 0x58: 0x07ff0001 (FREG1) 0x5C: 0x0ff70802 (FREG2) 0x60: 0x08010800 (FREG3) 0x64: 0x0fff0ff8 (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x0006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00004000 (FDOC) Programming OPCODES... program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 599M loops per second, 100 myus = 0 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Chip status register is 0c Found chip "Atmel AT25DF641" (8192 KB, SPI) at physical address 0xff800000. Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40P, 512 KB: RDID returned 0x1f 0x48 0x00 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B10, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B20, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B40, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F05, 64 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F10, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F20, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F40, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F16, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x5e, id2 0xb6 Probing for Macronix MX25L512, 64 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Numonyx M25PE40, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x5e, id2 0xb6 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for SST SST25VF040.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5e, id2 0xb6, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x5e, id2 0xb6 Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x00, id2 0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x00, id2 0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5e, id2 0xb6, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1f 0x48 0x00. Probing for ST M25P10-A, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1f 0x48 0x00. Probing for ST M25P20, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P40, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P40-old, 512 KB: RDID returned 0x1f 0x48 0x00. Probing for ST M25P80, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P16, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P32, 4096 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P64, 8192 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M25P128, 16384 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x5e, id2 0xb6 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x5e, id2 0xb6 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x00, id2 0x03 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x5e, id2 0xb6 Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Winbond W25x20, 256 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Winbond W25x40, 512 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x5e, id2 0xb6, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x00, id2 0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0x5e, id2 0xb6 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xff, id2 0xff Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1f 0x48 0x00. probe_spi_rdid_generic: id1 0x1f, id2 0x4800 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Reading flash... done.