This was tested on a “custom” mainboard
Of interest to the flashrom group would be that this
worked on “Intel ICH9M-E", Chip set with an Atmel “AT25DF641” 8MB chip
this was a “./flashrom -r save.img” –V >./flashrom-trace.txt
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard you tested. Thanks for your help!
===
Reading flash... done.
<<flashrom-trace.txt>>
After save of SPI rom image I did a cmp –l between what I put on it with a ms-dos fpt.exe program
and the saved image => compare came out identical
I will send more traces as I do write … etc.
If you need / want more info I will do what I can to get it for you
Sr Firmware Eng.
Bally Technologies
6601 South Bermuda Road
Las Vegas, NV 89119
Direct 702.584.7109
Main 702.584.7700