Index: board_enable.c =================================================================== --- board_enable.c (revision 650) +++ board_enable.c (working copy) @@ -832,6 +832,36 @@ } /** + * Suited for Asus A7V8X: VIA KT400 + VT8235 + IT8703F-A + */ +static int board_asus_a7v8x(const char *name) +{ + struct pci_dev *dev; + uint16_t base; + uint8_t tmp; + + dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ + if (!dev) { + fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n"); + return -1; + } + + base = pci_read_word(dev, 0x88) & 0xff80; /* PM IO Base */ + + /* Disable SMI */ + tmp = INB(base + 0x2C); + tmp &= ~0x01; + OUTB(tmp, base + 0x2C); + + /* Raise GPIO51 on the IT8703F. */ + tmp = INB(0x370); + tmp |= 0x02; + OUTB(tmp, 0x370); + + return 0; +} + +/** * We use 2 sets of IDs here, you're free to choose which is which. This * is to provide a very high degree of certainty when matching a board on * the basis of subsystem/card IDs. As not every vendor handles @@ -860,6 +890,7 @@ {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, "Albatron", "PM266A*", board_epox_ep_8k5a2}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe61", "Artec Group", "DBE61", board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe62", "Artec Group", "DBE62", board_artecgroup_dbe6x}, + {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, "ASUS", "A7V8X", board_asus_a7v8x}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8X-MX SE", board_asus_a7v8x_mx}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", ich2_gpio22_raise}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "asus", "p5a", "ASUS", "P5A", board_asus_p5a},