flashrom v0.9.6.1-r1650 on Linux 3.2.0-37-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (3 args): ./flashrom -p internal:fwh_idsel=0x000022334455 -V Calibrating delay loop... OS timer resolution is 1 usecs, 1383M loops per second, delay more than 10% too short (got 78% of expected delay), recalculating... 947M loops per second, 10 myus = 12 us, 100 myus = 109 us, 1000 myus = 1148 us, 10000 myus = 11070 us, 4 myus = 6 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7133" DMI string system-version: "100" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "MS-7133" DMI string baseboard-version: "100" DMI string chassis-type: "Desktop" Found Winbond Super I/O, id 0x82 Found chipset "Intel ICH6/ICH6R" with PCI ID 8086:2640. Enabling flash write... Setting IDSEL from 0x001122334567 to 0x000022334455 for top 16 MB. 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x0 0xffe00000/0xffa00000 FWH IDSEL: 0x0 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x4 0xff500000/0xff100000 FWH IDSEL: 0x5 0xff400000/0xff000000 FWH IDSEL: 0x5 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x200000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled OK. The following protocols are supported: FWH. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x20, id2 0x2c Found ST flash chip "M50FW040" (512 kB, FWH) at physical address 0xfff80000. Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x20, id2 0x2c Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x20, id2 0x2c Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x20, id2 0x2c Found ST flash chip "M50FW040" (512 kB, FWH). === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. Restoring PCI config space for 00:1f:0 reg 0xdc Restoring PCI config space for 00:1f:0 reg 0xd4 Restoring PCI config space for 00:1f:0 reg 0xd0