hi,

if you are using an sf100 with a firmware version between 2.1.1 and
5.1.2 (non-inclusive), I would like to know from you if flashrom
version r1649 or newer works for you or not. Probing for a chip (even
if there is none attached) suffices as a test. Apparently earlier
versions do not support setting the spi clock rate, but we always do
that (since r1649) and fail programmer initialization on those versions.
I try to find out which versions support setting the speed.

BTW did anybody try to contact dediprog and request any information
that would help flashrom to support their programmers better?

I would also like to know if any dediprog sf300 or sf600 users are
reading this and would like to see support for it in flashrom.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner

_______________________________________________
flashrom mailing list
flashrom@flashrom.org
http://www.flashrom.org/mailman/listinfo/flashrom