Hi Sandy,What is the result of `lspci -nn | grep ISA` on your system? I uploaded a patch for Lewisburg PCI IDs here: https://review.coreboot.org/#/c/20922/ I have tested Lewisburg PCH + W25Q256xxx and it seems to work. Let me know if you need any help applying the patch and testing it out on your system.On Tue, Aug 8, 2017 at 7:09 PM, Sandy Zhang <sanzhang@celestica.com> wrote:Hi David,Do you know whether the configuration "Lewisburg PCH + W25Q256xxx SPI" has been tested with the flashrom? thank you!2017-08-08 3:55 GMT+08:00 David Hendricks <david.hendricks@gmail.com>:Hi Sandy,Correct - The PCH will not allow us to write anything to regions which are not defined in the flash descriptor. You could add those regions to the "BIOS" region if you wish to update them from your host OS. The SPI Programming Guide for your PCH (Lewisburg?) should also have info about additional regions which you may set up in the flash descriptor."EW" means erase and write, "S" means skip (content does not need to change), "E" means erase only, "W" means write onlyOn Mon, Aug 7, 2017 at 12:50 AM, Sandy Zhang <sanzhang@celestica.com> wrote:Hi David,It seems that the below 2 regions are "write denied":00A26000 00A35FFF 00010000 DER #1 Region00A36000 00FEFFFF 005BA000 10 Gbe A RegionBy the way, can you tell me what is the other parament "EW", "S" and "E" meana? thank you!2017-08-07 13:02 GMT+08:00 David Hendricks <david.hendricks@gmail.com>:Hi Sandy,It might not have done what you expect. The error is because offsets 0xa26000-0xffffff are not defined in the flash descriptor, so the PCH gives us an error when flashrom attempts to update it. ":WD" next to the offsets in the log means "write denied".If you wish to update that region of the ROM then you must change your flash descriptor to include it and set the permissions to enable read and write.On Sun, Aug 6, 2017 at 8:20 PM, Sandy Zhang <sanzhang@celestica.com> wrote:Hi David,Attachment is the log file when flash bios into Winbond 32MB SPI rom, could you help to check if it's updated sucessfully? thank you!2017-08-05 10:45 GMT+08:00 Sandy Zhang <sanzhang@celestica.com>:Hi David,Thank you very much, I will try to add the patch to flashrom-0.9.9, As a BIOS engineer, it is a bit difficult for me to complete this.Do you know when will make it into a release tarball?BRSandy2017-08-05 0:05 GMT+08:00 David Hendricks <david.hendricks@gmail.com>:On Aug 3, 2017 11:51 PM, "Sandy Zhang" <sanzhang@celestica.com> wrote:Hi David,Thanks for your reply, can you tell me where to download the flash package like "flashrom-0.9.9.tar" which is downloaded from the address ''https://www.flashrom.org/Downloads "? thank you!The Skylake patches have not made it into a release tarball yet. Can you try using the git sources from https://review.coreboot.org/cgit/flashrom.git ? E.g:git clone https://review.coreboot.org/flashrom.git git checkout origin/stagingmakeBRSandy2017-08-04 14:35 GMT+08:00 David Hendricks <david.hendricks@gmail.com>:Hi Sandy,Skylake support was recently merged: https://review.coreboot.org/18973 However you may need to add your PCH PCI ID. What does `lspci -nn | grep LPC` show on your test system?And yes, a 32MB ROM should work fine.On Mon, Jul 31, 2017 at 4:11 AM, Sandy Zhang <sanzhang@celestica.com> wrote:Hi,Can you tell me when flashrom support Intel Purley platform Lewisburg PCH?and if it can support flash 32 MB SPI rom?I am eager to your reply as soon as possible, thank you very much!--Best Regard!Sandy Zhang ( 张立康)BIOS EngineerGlobal Design ServiceCelestica(Shanghai) R&D Center, ChinaMail: sanzhang@celestica.comMobile: (+86)15965353952Phone: (+86)021-61006028-7623
_______________________________________________
flashrom mailing list
flashrom@flashrom.org
https://mail.coreboot.org/mailman/listinfo/flashrom --Best Regard!Sandy Zhang ( 张立康)BIOS EngineerGlobal Design ServiceCelestica(Shanghai) R&D Center, ChinaMail: sanzhang@celestica.comMobile: (+86)15965353952Phone: (+86)021-61006028-7623--Best Regard!Sandy Zhang ( 张立康)BIOS EngineerGlobal Design ServiceCelestica(Shanghai) R&D Center, ChinaMail: sanzhang@celestica.comMobile: (+86)15965353952Phone: (+86)021-61006028-7623--Best Regard!Sandy Zhang ( 张立康)BIOS EngineerGlobal Design ServiceCelestica(Shanghai) R&D Center, ChinaMail: sanzhang@celestica.comMobile: (+86)15965353952Phone: (+86)021-61006028-7623--Best Regard!Sandy Zhang ( 张立康)BIOS EngineerGlobal Design ServiceCelestica(Shanghai) R&D Center, ChinaMail: sanzhang@celestica.comMobile: (+86)15965353952Phone: (+86)021-61006028-7623--Best Regard!Sandy Zhang ( 张立康)BIOS EngineerGlobal Design ServiceCelestica(Shanghai) R&D Center, ChinaMail: sanzhang@celestica.comMobile: (+86)15965353952Phone: (+86)021-61006028-7623