I would like to request flashrom support for the ENE KB9012QF A3 chip.  

This chip has 128KB of internal flash memory that can be accessed through the SPI interface.  The data sheet for this chip can be found at the following URL http://www.s-manuals.com/pdf/datasheet/k/b/kb9012_r0.9_ene.pdf

The relevant section starts on page 218. 

I was able to read the contents of the chip using the SPI bus on my Raspberry pi, but unfortunately, I lack the skills to write to the chip.  There is very little documentation on the write command, and I was unable to get it working in my tests.

Thank you for your consideration.