Hello!

I try to writing rom to chip, but get error:

"
Erasing and writing flash chip... FAILED at 0x00000008! Expected=0xff, Found=0x9c, failed byte count from 0x00000000-0x00000fff: 0xff1
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00000008! Expected=0xff, Found=0x9c, failed byte count from 0x00000000-0x0000ffff: 0xfee6
ERASE FAILED!
FAILED!
"

This, is output from flashrom -V:

flashrom v0.9.7-r1711 on Linux 3.14.50-std460-amd64 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.3.1, GCC 4.8.4, little endian
Command line (3 args): flashrom -p internal -V
Calibrating delay loop... OS timer resolution is 2 usecs, 475M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1003 us, 10000 myus = 10018 us, 8 myus = 9 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "M2N-MX"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xfec80000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled.
Please send the output of "flashrom -V" to flashrom@flashrom.org with
your board name: flashrom -V as the subject to help us finish support for your
chipset. Thanks.
OK.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
The following protocols are supported: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x74, id2 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address 0xfff80000.
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88



--
| stellio.org.ua