Hi! But, i'm not flashing yet. I have this error when start:
>> sudo flashrom -w 946F1P06.BIN --programmer internal
flashrom v0.9.6.1-r1564 on Linux 3.5.4-1-ARCH (i686)
flashrom is free software, get the source code at http://www.flashrom.org
--
Calibrating delay loop... OK.
Found chipset "Intel H55". Enabling flash write... The Flash Descriptor Security Override Strap-Pin is set. Restrictions implied
by the FRAP and FREG registers are NOT in effect. Please note that Protected
Range (PR) restrictions still apply.
Enabling hardware sequencing due to multiple flash chips detected.
OK.
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0.
Error: Image size doesn't match
--
And here internal -V:
--
>> sudo flashrom --programmer internal -V
flashrom v0.9.6.1-r1564 on Linux 3.5.4-1-ARCH (i686)
flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.10, GCC 4.7.1 20120721 (prerelease), little endian
Command line (3 args): flashrom --programmer internal -V
Calibrating delay loop... OS timer resolution is 1 usecs, 1373M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1021 us, 10000 myus = 9838 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "Foxconn"
DMI string baseboard-product-name: "H55MX-S Series"
DMI string baseboard-version: "1.1"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8720 on port 0x2e
Found chipset "Intel H55" with PCI ID 8086:3b06. Enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8
Root Complex Register Block address = 0xfed1c000
GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x4008 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=0, FDV=1, FLOCKDN=0
The Flash Descriptor Security Override Strap-Pin is set. Restrictions implied
by the FRAP and FREG registers are NOT in effect. Please note that Protected
Range (PR) restrictions still apply.
Programming OPCODES... done
0x06: 0x0000 (HSFC)
HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0
0x08: 0x00000000 (FADDR)
0x50: 0x0000ffff (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff
0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write.
0x58: 0x07ff0700 FREG1: BIOS region (0x00700000-0x007fffff) is read-write.
0x5C: 0x06ff0001 FREG2: Management Engine region (0x00001000-0x006fffff) is read-write.
0x90: 0x00 (SSFS)
SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0
0x91: 0xf84200 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0
0x94: 0x5006 (PREOP)
0x96: 0x463b (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xC4: 0x00000000 (LVSCC)
LVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0, VCL=0
0xC8: 0x00002001 (UVSCC)
UVSCC: BES=0x1, WG=0, WSR=0, WEWS=0, EO=0x20, VCL=0
0xD0: 0x00000000 (FPB)
Enabling hardware sequencing due to multiple flash chips detected.
SPI Read Configuration: prefetching enabled, caching enabled, OK.
No IT87* serial flash segment enabled.
The following protocols are supported: FWH, Programmer-specific.
Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash chips with a combined density of 8192 kB.
There is only one partition containing the whole address space (0x000000 - 0x7fffff).
There are 2048 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x7f, id2 0xf1, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4e, id2 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x7f7d, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific).
No operations were specified.
Restoring MMIO space at 0xb76e48a0
Restoring MMIO space at 0xb76e489c
Restoring MMIO space at 0xb76e4898
Restoring MMIO space at 0xb76e4896
Restoring MMIO space at 0xb76e4894
Restoring PCI config space for 00:1f:0 reg 0xdc
--
2012/10/1 Stefan Tauner
<stefan.tauner@student.tuwien.ac.at>
Hello Vladislav!
You have visited our IRC channel briefly and mentioned the Foxconn board
together with a short, but interesting snippet of flashrom output. Can
you please send us the complete output of
flashrom --programmer internal -V
(you can use the --output option to log to a file directly).
How did flashing the board worked out for you in the end?
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner