[flashrom] Error on Yuna

[Flynn Price]

Hi, can you please see the error below? Am i safe to reboot?
Previously it said the flash was in an unknown state and to not reboot.
Thanks!

Erasing and writing flash chip... 0x420000-0x427fff: EInvalid OPCODE 0x06,
will not execute.
spi_write_cmd failed during command execution at address 0x420000
 ERASE_FAILED
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Reading current flash chip contents... 000000-0x7fffff:R done.
Good, writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or
flash
chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [e-mail], thanks!