Hi again!

I'm trying to "Try & Error method on GPIO pins" but not sure what to do:

======================
san@flashrom:~$ lspci | grep ISA
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
======================

seems to be fine, but can not find anything usefull at:

======================
san@flashrom:~$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : ata_piix
0294-0297 : pnp 00:01
0376-0376 : 0000:00:1f.1
0376-0376 : ata_piix
0378-037a : parport0
03f2-03f2 : floppy
03f4-03f5 : floppy
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : ata_piix
03f7-03f7 : floppy
03f8-03ff : serial
0400-04bf : pnp 00:0a
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
0428-042f : ACPI GPE0_BLK
04d0-04d1 : pnp 00:01
0500-051f : 0000:00:1f.3
0a78-0a7b : pnp 00:01
0b78-0b7b : pnp 00:01
0bbc-0bbf : pnp 00:01
0cf8-0cff : PCI conf1
0e78-0e7b : pnp 00:01
0f78-0f7b : pnp 00:01
0fbc-0fbf : pnp 00:01
a000-afff : PCI Bus 0000:02
a000-a0ff : 0000:02:02.0
a000-a0ff : 8139too
b000-b01f : 0000:00:1d.1
b000-b01f : uhci_hcd
b400-b41f : 0000:00:1d.2
b400-b41f : uhci_hcd
b800-b81f : 0000:00:1d.3
b800-b81f : uhci_hcd
bc00-bc1f : 0000:00:1d.0
bc00-bc1f : uhci_hcd
c000-c007 : 0000:00:1f.2
c000-c007 : ata_piix
c400-c403 : 0000:00:1f.2
c400-c403 : ata_piix
c800-c807 : 0000:00:1f.2
c800-c807 : ata_piix
cc00-cc03 : 0000:00:1f.2
cc00-cc03 : ata_piix
d000-d00f : 0000:00:1f.2
d000-d00f : ata_piix
d800-d8ff : 0000:00:1f.5
d800-d8ff : Intel ICH5
dc00-dc3f : 0000:00:1f.5
dc00-dc3f : Intel ICH5
f000-f00f : 0000:00:1f.1
f000-f00f : ata_piix

======================

You can find bios dump on my server ( http://www.e-san.info/Go!/deeper!/Flashrom-Przemo/) and other files.

Regards.