Hi Carl-Daniel and group, Will do. I also found I had to insert  #define FLASHROM_VERSION  "3397"  into the top of  flashrom.c to get it to compile. When i down loaded the source with apt-get -b source it appeared to compile OK as I reported. I do not know if this is a known error ? regards to all, (dja.)

Carl-Daniel Hailfinger wrote: 
Hi David,

thanks for the info. Please keep the flashrom mailing list in CC (hit
"reply all") so others can chime in on the discussion.

Regards,
Carl-Daniel

On 14.10.2009 20:33, spirals wrote:
  
Hi Carl-Daniel, Have just restarted after a full covers off eye-ball
of the board is definatly is the K&S6A (v1.0) board, pene also looked
(my eyes are not as good as they were) and she confirmed 1.0 and
_/*not 1.0A*/_ regards, (dja.)

Carl-Daniel Hailfinger wrote:
    
Hi Dave,

On 13.10.2009 21:53, David J Aldridge wrote:
 
      
Ran flashrom and it reports "No EEPROM/flash device found", same
with -m ecs:k7s5a.
    
        
Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
-dV" and if tell us if your board is
K7S6A (V1.0)
or
K7S6A (V1.0A)

Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&CategoryID=1&DetailName=Bios&MenuID=52&LanID=0

http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&CategoryID=1&DetailName=Bios&MenuID=52&LanID=0


Regards,
Carl-Daniel