On Fri, Sep 02, 2011 at 10:51:43PM +0200, Uwe Hermann wrote:
See patch for a first attempt to support the Macronix MX28F2000P.
Updated patch which now works.
Thanks to Carl-Daniel for pointing out that you need two 0x90 commands, one per ID byte you want to read. Thanks Meteo0 on IRC for testing the patch on his hardware, and verifying that the board always provides 12V on the VPP pin (which is why write/erase work).
The patch now does the work without major hacks. Unneeded delays are removed, incorrect comments too.