Hi there

I’m using a CH341a to flash a W25Q128.V chip. Read and write operations were working until my flashing machine fell asleep halfway through a write to the chip. Since then I’ve had no luck writing to this chip, either using flashrom 1.3 or 1.4-dev on both macOS and Linux.

Some output:

```
Found Winbond flash chip "W25Q128.V" (16384 kB, SPI).
This chip may contain one-time programmable memory. flashrom cannot read
and may never be able to write it, hence it may not be able to completely
clone the contents of this chip (see man page for details).
write_wp_bits: wp_verify reg:1 value:0x0
write_wp_bits: wp_verify reg:2 value:0x0
write_wp_bits: wp_verify reg:3 value:0x60
write_wp_bits: wp_verify reg:1 value:0x30
write_wp_bits: wp_verify failed: reg:1 actual:0x30 expected:0x0
write_wp_bits: wp_verify reg:2 value:0x30
write_wp_bits: wp_verify reg:3 value:0x60
Failed to unlock flash status reg with wp support.
Block protection is disabled.
Reading old flash chip contents... read_flash:  region (00000000..0xffffff) is readable, reading range (00000000..0xffffff).
done.
erase_write:  region (00000000..0xffffff) is writable, erasing range (0x204000..0x204fff).
0x204000..0x204fff verify_range: Verifying  region (00000000..0xffffff)
read_flash:  region (00000000..0xffffff) is readable, reading range (0x204000..0x204fff).
FAILED at 0x00204000! Expected=0xff, Found=0x02, failed byte count from 0x00204000-0x00204fff: 0x1000
ERASE FAILED!
Erase/write done from 0 to ffffff
Write Failed!Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... read_flash:  region (00000000..0xffffff) is readable, reading range (00000000..0xffffff).
done.
Apparently at least some data has changed.
Your flash chip is in an unknown state.
Please report this to the mailing list at flashrom@flashrom.org or
on IRC (see https://www.flashrom.org/Contact for details), thanks!
write_wp_bits: wp_verify reg:1 value:0xff
write_wp_bits: wp_verify failed: reg:1 actual:0xfc expected:0x84
write_wp_bits: wp_verify reg:2 value:0xff
write_wp_bits: wp_verify failed: reg:2 actual:0x41 expected:0x1
write_wp_bits: wp_verify reg:3 value:0x8
```

Is there anything I can do, or is something fundamentally broken?


Rich Thanki | MD | Technology

rich@janga.la | +44 7956 109547