Hallo,

I hope my English is good inouge,

I try:

flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1

flashrom  on Linux 4.19.118+ (armv6l)

flashrom is free software, get the source code at https://flashrom.org

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).

Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on linux_spi.

No operations were specified.

And i try:

flashrom -p linux_spi:dev=/dev/spidev0.0 -r old_bios.bin,spispeed=1

flashrom  on Linux 4.19.118+ (armv6l)

flashrom is free software, get the source code at https://flashrom.org

Then come this:

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).

Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.

===

This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE

The test status of this chip may have been updated in the latest development

version of flashrom. If you are running the latest development version,

please email a report to flashrom@flashrom.org if any of the above operations

work correctly for you with this flash chip. Please include the flashrom log

file for all operations you tested (see the man page for details), and mention

which mainboard or programmer you tested in the subject line.

Thanks for your help!

Read is not working on this chip. Aborting.

Dit i make something wrong in the Comand, how look the correct Comand,

or is W25Q32.V not suppotret ?

In flashrom -L i see W25Q32.V.

Sicher gesendet mit Tutanota. Hol dir deine eigene verschlüsselte & werbefreie Mailbox:

https://tutanota.com

_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-leave@flashrom.org